Moisture Sorption Mechanism of Aromatic Polyamide Fibers: Diffusion of Moisture in Poly (p-phenylene Terephthalamide) Fibers 1
Source abstract
Abstract
Diffusion of moisture into three kinds of Kevlar fibers—regular Kevlar, Kevlar 49, and Kevlar 149—was observed using a gravimetric method that varied vapor pressure at 25.0°C. The apparent diffusion coefficients for sorption and desorption, which were small, on the order of 10 -12 cm 2 / s, were found by fitting the calculated curves to the observed curves at the initial stage of the process using a Fickian model of a homogeneous cylinder. At intermediate and later stages of the sorption process, however, the observed results deviated from the calculated ones in two contrasting ways; i.e., the observed results were larger than the calculated ones for regular Kevlar and Kevlar 49 and vice versa for Kevlar 149. These results suggest a difference in the sorption mechanism, possibly due to the skin-core morphology, which is distinct for regular Kevlar and Kevlar 49 but indistinct for Kevlar 149. Referring to the skin-core mor phology with ( D core / D skin ) > 1, the sorption curve was further analyzed using a coaxial cylinder model with dual components that varied (D core /D skin ) from 1.5 to 7 but fixed the outer and inner radius ratio ( R 2 / R 1 ) at 1.2. The calculated results agree, in geheral, with the observed results for regular Kevlar and Kevlar 49 over the whole range of the sorption process. The D core values depended much more on vapor pressure than the D skin values. In contrast, the observed results for Kevlar 149 could be accounted for if we applied the coaxial cylinder model with dual components, assuming ( D core / D skin ) < 1. The significance of the skin-core morphology as well as the interstitial and interfibrillar microvoids upon the sorption rate was discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Polymer crystallization and properties · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Textile Materials Science Laboratory, Hyogo University of Teacher Education, Yashiro-cho, Hyogo 673-14, Japan
References (26)
Show source-provided references
1. Arimoto, O. · Polymer
2. Chern, T. S., and Van Trump, J. E., U.S. patent 4883634, 1989.
3. Crank, J. · 1975
4. 10.1016/0032-3861(79)90157-510.1016/0032-3861(79)90157-5 ↗
5. E. I. du Pont de Nemours & Company, Data manual for Kevlar 49 aramide, 1986.
6. E. I. du Pont de Nemours & Company, Kevlar 149, Properties and Characteristics of Yam and Composite, 1987.
7. 10.1007/BFb005051410.1007/BFb0050514 ↗
8. 10.1177/00405175910610110710.1177/004051759106101107 ↗
9. Fukuda, M. · Polymers · 1969
10. 10.1295/polymj.23.112310.1295/polymj.23.1123 ↗
11. 10.1002/app.1977.07021101710.1002/app.1977.070211017 ↗
12. 10.1080/0021846890805059010.1080/00218468908050590 ↗
13. 10.1080/0022234830821550410.1080/00222348308215504 ↗
14. 10.4188/transjtmsj.33.8_T9310.4188/transjtmsj.33.8_T93 ↗
15. 10.1002/pol.1983.18021091310.1002/pol.1983.180210913 ↗
16. 10.1016/0032-3861(87)90428-910.1016/0032-3861(87)90428-9 ↗
17. 10.1002/polc.507058012010.1002/polc.5070580120 ↗
18. 10.1002/pol.1983.18021100610.1002/pol.1983.180211006 ↗
19. 10.1002/app.1979.07023010610.1002/app.1979.070230106 ↗
20. 10.1021/ja01153a00410.1021/ja01153a004 ↗
21. Provost, R. L., U.S. patent, 4144023, 1979.
22. Rogers, C.E. · 1985
23. Tashiro, K. · Including Aromatic Polyamides, Macromolecules · 1977 · 10 · 413
24. 10.2115/fiber.31.11_T52410.2115/fiber.31.11_T524 ↗
25. Yabuki, K. · Fibers, Sen-i Gakkaishi · 1976 · 32 · T-35
26. 10.1002/app.1985.07030031310.1002/app.1985.070300313 ↗