Simulation of sliver blending and evaluation of blending irregularity

The quality of blended yarn depends on the uniformity of the blending of the multi-component fibers in the yarn, and sliver blending is a process necessary for mixing fibers. The movement of fibers directly affects the distribution and mixing of fibers in the sliver. In this paper, the sliver blending process was simulated, and a method for the evaluation of sliver blending irregularity was proposed. The effects of passages of drawing and blending ratio on the sliver mixing uniformity were studied and verified both by experiment and simulation. The results show that the blending irregularity decreases gradually and tends to be stable with the increase of the passages of blending drawing. The more similar the blending ratio of the two components with approximately equal linear densities, the easier it is for the component fibers to mix evenly in the sliver. The simulation results are in good agreement with the measured values and previous research results. In addition, the blending irregularity of fiber components in the blended sliver can be predicted by the simulation method.