Stab and puncture resistance of silica-coated Kevlar–wool and Kevlar–wool–nylon fabrics in quasistatic conditions

Stab and puncture resistant body armor is widely used by the law enforcement personnel, security and military in many countries. The primary requirement for the armor is to provide protection against various weapons used in an attack. Comfort properties are given increased importance in many countries and considered the second most important requirement. In this research Kevlar was blended with wool and wool–nylon. The resultant fabrics were coated with silica and their stab and puncture resistance in quasistatic conditions was examined using the universal tensile tester. It was hypothesized that the application of coating will generate higher friction to restrict the lateral movement of yarns, and thus present a higher number of yarns for direct resistance to impact during the attack and dissipating the impact energy, whereas the use of wool and nylon will provide the required ergonomics of wearability and stretch. It was observed that the application of the silica coating helped in improving the resistance to the stab and punctures using weapons such as knife (P1, as specified in NIJ 0115.00), ball and pointed impactors. In the quasistatic tests, the highest value of the maximum resistant force was recorded when the ball was used and the lowest was observed for the knife. Furthermore, the application of coating helped in absorbing impact energy. However, the fabric stiffness increased due to the coating, which will negatively impact the ergonomics and wearability.