Evaluation of thermal, moisture management and sensorial comfort properties of superabsorbent polyacrylate fabrics for the next-to-skin layer in firefighters’ protective clothing

This research investigated the transport properties (such as thermal resistance, water vapor resistance and air permeability), moisture management capacity and sensorial properties of some knitted structures of superabsorbent polyacrylate in order to explore their potential as next-to-skin layers in firefighters’ protective clothing in Australia. Test results using these fabrics were compared with the currently used next-to-skin woven fabric. Three different knitted structures (i.e. jersey, rib and interlock) were selected for the study in addition to the current woven fabric in use by Australian firefighters. It was observed that the knitted fabric samples of superabsorbent polyacrylate retained higher amounts of water compared to the fabric sample currently used in the firefighters’ clothing. However, the woven fabric sample dried at a faster rate. Hence, a blended fabric of polyacrylate with the current Nomex® fabric can help in higher sweat absorption and faster drying. The thermal and water vapor resistance of jersey fabric was the lowest, which may better facilitate the transfer of metabolic heat and vapor to the environment, resulting in better thermal comfort. Furthermore, all the fabric samples showed a low coefficient of friction (∼0.2), which indicated less tactile discomfort if the fabrics are worn as the next-to-skin layer in the firefighters’ clothing. The overall moisture management properties of the fabric samples were rated as fair to good. The findings of this research suggest that the superabsorbent material has the potential to be used in place of the existing next-to-skin layer of firefighters’ protective clothing, with better sweat absorption capacity and thermal comfort.