journal article·2012-09

Quantitative evaluation of air gap thickness and contact area between body and garment

Agnes Psikuta, Joanna Frackiewicz-Kaczmarek, Iwona Frydrych, René Rossi

Textile Research Journal· Volume 82· Issue 14
Publisher page

Abstract

The thermal, evaporative and wicking properties of clothing depend not only on the properties of the fabric but also on the thickness of air layers and the magnitude of the contact area and their variation. The aim of this study was to accurately determine the contact area and the air gap thickness between clothing and the human body in detail. These parameters were measured for a range of typical patterns of garments (tight- and loose fitting) covering either the upper or lower body and made of various types of fabrics (knitted and woven). The method consisted of imposing three-dimensional scans of the nude and dressed manikin and determining the distance between their surfaces by advanced three-dimensional scan post-processing. Due to this method the distribution of the air gap thickness and the contact area over body parts was obtained and this knowledge can be applied in models of heat and mass transfer in the clothing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Thermoregulation and physiological responses · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory for Physiology and Protection, Empa – Swiss Federal Laboratories for Materials Science and Technology, St. Gallen, Switzerland

Department of Clothing Technology, Technical University of Lodz, Lodz, Poland

References (29)

Show source-provided references
1. 10.1016/S0065-2717(08)70240-510.1016/S0065-2717(08)70240-5 ↗
2. 10.1016/S0003-4878(99)00057-510.1016/S0003-4878(99)00057-5 ↗
3. 10.1016/S0003-4878(99)00061-710.1016/S0003-4878(99)00061-7 ↗
4. Bouskill L · 1998 · 540
5. 10.1007/s00421-008-0966-510.1007/s00421-008-0966-5 ↗
6. Spencer-Smith JL · Clothing Res J · 1977 · 5 · 3
7. 10.1177/004051750708130910.1177/0040517507081309 ↗
8. 10.1108/0955622081085045010.1108/09556220810850450 ↗
9. Umeno T · ASHRAE Trans · 2001 · 107 · 71
10. 10.1080/0014013910896730910.1080/00140139108967309 ↗
11. 10.1177/00405175980680060110.1177/004051759806800601 ↗
12. 10.1016/S0017-9310(99)00235-510.1016/S0017-9310(99)00235-5 ↗
13. 10.1016/S1290-0729(80)00211-610.1016/S1290-0729(80)00211-6 ↗
14. 10.1080/1542811020898471210.1080/15428110208984712 ↗
15. 10.1016/S1572-347X(05)80057-610.1016/S1572-347X(05)80057-6 ↗
16. 10.1080/0014013090352815210.1080/00140130903528152 ↗
17. 10.1618/jhes.7.7510.1618/jhes.7.75 ↗
18. 10.1016/j.apergo.2006.04.01710.1016/j.apergo.2006.04.017 ↗
19. 10.1177/152808370706950610.1177/1528083707069506 ↗
20. 10.1533/joti.2005.023910.1533/joti.2005.0239 ↗
21. Xu JH and Zhang WB. The Vacant Distance Ease Relation between Body and Garment. ICIC2009: Second International Conference on Information and Computing Science, Vol 4, Proceedings – Modelling and Simulation in Engineering . H. G. Bao, Y. Jiang and C. Grecos, 2009, pp. 38–41.10.1109/ICIC.2009.318 ↗
22. Zhang ZH and Li J. Relationship between Garment Fit and Thermal Comfort. Textile Bioengineering and Informatics Symposium Proceedings , Vols 1–3. Y. Li, Y. P. Qui, X. N. Luo and J. S. Li, 2010, pp. 1317–1321.
23. Bouskill L · 1998 · 510
24. Kim IY · FireMater · 2002 · 26 · 121
25. ISO20685: 2005. 3-D scanning methodologies for internationally compatible anthropometric databases.
26. ISO6330: 2000. Textiles - Domestic washing and drying procedures for textile testing.
27. ISO7250-1: 2008. Basic human body measurements for technological design. Part 1: Body measurement definitions and landmarks.
28. Field A · 2005
29. Luible C · 2008