Utilization of inline total dissolved solids measurement system in a pulp mill's brownstock washing line
Source abstract
Abstract
Efficient washing improves the recovery of sodium (Na) and sulfur (S) cooking chemicals, as well as wood-based dissolved organic material. It also reduces the additional consumption of chemicals in the subsequent bleaching stages. The operation of the brownstock washing of the pulp mill’s fiber line has a significant impact on the mill’s energy economy, material efficiency, and environmental emissions. Process refractometers can be used to measure the total dissolved solids (TDS) from both the washing liquor and the pulp suspension filtrate part directly from pipelines or pipe bypass loops. In addition, by measuring the three or four incoming/outgoing dissolved solids streams to the washers, together with consistencies and flow rate measurements, it is possible to build the real-time effectiveness calculation of the washer(s). In this work, an online efficiency calculation based on TDS measurements was built for a pressure filter after cooking and oxygen (O2) delignification. The washing performance was monitored over a longer period, and stepwise tests were conducted to find the optimal operating mode. The feed and washing consistencies, the washer’s torque, and the washing liquid distributions varied, and the washer’s efficiency values were monitored using realtime measurements. From the long-term trends of the efficiency calculation, process disturbances could be detected, and their causes could be found. Based on the results of the stepwise tests, an optimal operating model for the washer was found. By optimizing the washing consistency, the Y10 washing yield could be increased. More efficient washing with the same or even a smaller amount of washing liquid can relieve the operation of the evaporator, which is often a bottleneck in the mill. The study also found the effect of cooking-related carryover on the operation of the oxygen stage, as well as differences in the washability of softwood and hardwood.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · Freezing and Crystallization Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
South Eastern Finland University of Applied Sciences
Vaisala (Finland)
References (27)
Show source-provided references
1. 1. Lunn, R., Pulp Pap. Can. 102(3): 46(2001).10.1017/S0020859001000359 ↗
2. 2. Kopra, R., “Application of the refractometer in the measurement and monitoring of brownstock washing,” Ph.D. thesis, Aalto University, Espoo, Finland, 2015.
3. 3. Perkins, J.K., Welsh, H.S., and Mappus, J.H., Tappi 37(3): 83(1954).
4. 4. Wakeman, R.J., “Cake washing,” in Solid-Liquid Separation (L. Svarovsky, Ed.), Chemical Engineering Series, L., Butterworth & Co. Ltd., 1979, pp. 283-296. https://doi.org/10.1016/B978-0-408-70795-4.50020-6.10.1016/B978-0-408-70795-4.50020-6 ↗
5. 5. Lee, P., Tappi J. 67(11): 100(1984).
6. 6. Hakamäki, H. and Kovasin, K., Pulp Pap. Can. 86(9): 243(1985).
7. 7. Grén, U.B. and Ström, K.H.U., Pulp Pap. Can. 86(9): 261(1985).
8. 8. Trinh, D.T., Poirier, N.A., Crotogino R.H., et al., J. Pulp Pap. Sci. 15(1): 28(1989).
9. 9. Shackford, L.D., “Bleach washer performance,” Bleach Plant Operations Short Course, TAPPI Press, Atlanta, 1992, p. 147.
10. 10. Josephson, W., “Brown stock washer optimization and control,” Ph.D. thesis, Auburn University, Auburn, AL, USA, 1995.
11. 11. Kopra, R., Karjalainen, S., Tirri, T., et al., Appita J. 65(1): 49(2011).
12. 12. Kopra, R., Karjalainen, S., and Tervola, P., “DD-washer performance optimization using the latest measurement technology,” TAPPI PEERS Conf., TAPPI Press, Atlanta, 2022.
13. 13. Kopra, R. and Karjalainen, S., “The effect of optimizing the operat-ing parameters of the washers on the washers’ efficiency and the overall economy of a mill,” TAPPI PEERS Conf., TAPPI Press, Atlanta, 2023.
14. 14. Krotscheck, A.W., “Pulp washing,” in Handbook of Pulp (H. Sixta, Ed.), Wiley-VCH Verlag GmbH & Co., Weinheim, 2006.https://doi.org/10.1002/9783527619887.ch5.10.1002/9783527619887.ch5 ↗
15. 15. Andtbacka, S., Pulp Pap. Can. 99(3): 57(1998).
16. 16. Iijima, J.F. and Taneda, H., J. Pulp Pap. Sci. 23(12): 561(1997).
17. 17. Magnotta, V. and Courchene, C., “Process effects of entrained black liquor and oxygen stage solids on oxygen delignification,” Pulping Conf., TAPPI Press, Atlanta, 1982, p. 309.
18. 18. Miller, W., Shackford, L., Jiang, H., et al., Tappi J. 74(2): 117(1991).
19. 19. Mutikainen, H., Strikina, N., Eerola, T., et al., Appita J. 68(2):159(2015).
20. 20. Mutikainen, H., Kopra, R., Pesonen, A., et al., “Measurement, state and effect of gas dispersion on oxygen delignification,” Int. Pulp Bleaching Conf., TAPPI Press, Atlanta, 2017, p. 57.
21. 21. Käyhkö, J., Mutikainen, H., Peltonen, K., et al., “Gas dispersion in the oxygen delignification process,” TAPPI PEERS Conf., TAPPI Press, Peachtree Corners, GA, USA, 2018.
22. 22. Tervola, P., Appita 68(3): 258(2015).10.1353/bcc.2015.0055 ↗
23. 23. Mullen, T., TAPPI J. 15(9): 609(2016).https://doi.org/10.32964/TJ15.9.609.10.32964/TJ15.9.609 ↗
24. 24. Sullivan, D.P., Genco, J.M., and Berndt, G., “Two-stage oxygen del-ignification design and operation at Weyerhaeuser Canada Ltd.,” Pulping Conf., TAPPI Press, Atlanta, 1999.
25. 25. Shackford, L.D., “Unraveling the mystery of washing efficiency determination,” Pulping Conf., TAPPI Press, Atlanta, 1997.
26. 26. Miller, W., Sullivan, D.P., Genco, J.M., et al., “Medium consistency oxygen delignification design using a two phase concept. Part 2. High solids carry-over,” Pulping Conf., TAPPI Press, Atlanta, 1998.
27. 27. Pensar, G. and Uuteaineet, in Puukemia (W. Jensen, Ed.), Finnish Association of Paper Engineers, Helsinki, 1977. [in Finnish]