Compression refining: the future of refining? Application to Nordic bleached softwood kraft pulp
Source abstract
Abstract
A new compression refining technology based on the kneading of high consistency pulp has been selected and tested in various conditions with a model Nordic bleached softwood kraft (NBSK) pulp. The method uses a kneader mixer referred to as the ultra continuous mixer (UCM) to condition the pulp. Its performance levels were also compared with those obtained with traditional low consistency (LC) refining of the same pulp.Compression refining of the NBSK pulp with the UCM led to a much better °SR/strength compromise than conventional LC refining. High strength properties can also be achieved by compression refining, in a range similar to/or better than LC refining. The higher the strength required, the greater the advantages of this technology: for a given strength, a difference of up to 10°SR can be obtained as compared to LC refined pulp. Moreover, a higher tear index can be obtained with compression refining, since fiber cutting is greatly reduced.The lower °SR is due to the release of fewer cellulosic fines, which also results in the manufacturing of new papers combining a high strength and a high permeability that cannot be obtained with traditional LC refining. Indeed, with LC refining, a high strength is generally associated with a low permeability. Upscaling this technology seems to be possible since large production devices are already on the market for applications other than paper/pulp. With this new pulp behavior, papermakers will have to learn to think differently, as paper strength and °SR can now be decorrelated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Murphy, D.C., Appita 16(1): 16(1962).10.1080/00031305.1962.10479542 ↗
2. Hartmann, R.R., “Mechanical treatment of pulp fibers for property development,” Doctoral dissertation, Georgia Institute of Technology, Atlanta, 1984.
3. Dekker, J. “New insights in beating leading to innovative beat-ing techniques,” in Scientific and Technical Advances in Refining & Mechanical Pulping (Course Notes), Pira International, Leatherhead, UK, 2003, paper #10.
4. Dekker, J. and Yilmaz, G., “Flexible fibres and low fines content, potential benefits for tissue producers,” in Tissue World America 2012, Curran Assoc. Inc., Miami, 2012, pp. 312-321.
5. Kerekes, R.J., TAPPI J. 4(3): 9(2005).
6. Kerekes, R.J. and Senger, J.J., J. Pulp Paper Sci. 32(1): 1(2006).
7. Goosen, D., Olson, J.A., and Kerekes, R.J., J. Pulp Paper Sci. 33(2): 110(2007).
8. Eibinger, K., Eichinger, R., and Bauer, W., “Property development of virgin and recycled fibres treated with compression refining in a modified PFI mill,” in Proc. of the PIRA Intl. Refining Conf., Pira International, Leatherhead, UK, 2005, pp. 27-35.