Modeling the dynamics of evaporator wash cycles
Source abstract
Abstract
Kraft pulping is a process that utilizes white liquor, composed of sodium sulfide (Na2S) and sodium hydroxide (NaOH), for wood delignification and pulp production. This process involves washing the dissolved organics and spent chemicals from the pulp, resulting in the generation of black liquor. Prior to its use as fuel in the recovery boiler, the black liquor is concentrated in multiple-effect evaporators. During the evaporation process, the inorganic salts present in the liquor become supersaturated and undergo crystallization. Fluctuations in sodium, carbonate, sulfate, and oxalate can give rise to severe sodium salt scaling events, which significantly impact the thermal efficiency of the evaporators, and ultimately, pulp production. Dynamic modeling provides insights into fluctuations in liquor chemistry in the evaporators. The primary objective of this study was to employ dynamic modeling to evaluate the effects of wash liquor recovery from evaporator wash cycles. The dynamics associated with wash cycles encompass variations in the concentrations of salts and solids in the recovered wash liquor, changes in the flow rate of wash liquor recovery, and fluctuations in liquor volume within the liquor tanks. The dynamic model was developed using Matlab Simulink and applied to the evaporation plant of a pulp mill in South America. By utilizing one month of mill process data, the model enabled the evaluation of fluctuations in liquor chemistry due to evaporator wash cycles. The developed model has demonstrated the potential to estimate the concentration of key ions responsible for scaling and to contribute to enhancements in evaporator washing strategies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biofuel production and bioconversion · Lignin and Wood Chemistry · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Adams, T.N., TAPPI J. 84(6): 1(2001).
2. DeMartini, N.A. and Verrill, C.L., Int. Chem. Recovery Conf., PAPTAC, Brossard, QC, Canada, 2007, p. 479.
3. Frederick, W.J., Verril, C.L., and Rousseau, R.W., “High performance evaporators: A summary of findings, potential applications, and research needs to reduce or eliminate soluble scale fouling in high-solids black liquor concentrators,” TAPPI Pap. Summit—Spring Tech. Int. Environ. Conf., TAPPI Press, Atlanta, 2004.10.2172/761123 ↗
4. Grace, T.M., A Survey of Evaporator Scaling in the Alkaline Pulping Industry, Progress Report #1, Project 3234, Institute of Paper Chemistry, Appleton, WI, USA, 1975.
5. Schmidl, W. and Frederick, W.J., Int. Chem. Recovery Conf., TAPPI Press, Atlanta, 1998, p. 367.
6. DeMartini, N. and Frederick, W.J., “Scaling and fouling in black liquor evaporators,” in Black Liquor Evaporation (W.J. Frederick and N. DeMartini, Eds.), TAPPI Press, Peachtree Corners, GA, USA, 2019.10.32964/tj11.9.53 ↗
7. Shi, B., “Crystallization of solutes that lead to scale formation in black liquor evaporation,” Ph.D. thesis, Georgia Institute of Technology, Atlanta, 2002.
8. Frederick, W.J., Shi, B., Euhus, D.D., et al.., TAPPI J. 3(6): 7(2004).
9. Verril, C.L. and Frederick, W.J., “Evaporator fouling 101 – Sodium salt crystallization and soluble-scale fouling,” TAPPI Eng., Pulping Environ. Conf., TAPPI Press, Atlanta, 2005.
10. DeMartini, N.A. and Verrill, C.L., “Evaporator fouling mitigation –Case studies,” TAPPI Eng., Pulping Environ. Conf., TAPPI Press, Atlanta, 2005.
11. Khafhafera, A.N., Kung, J., and DeMartini, N.A., Can. J. Chem. Eng. 101(2): 819(2023). https://doi.org/10.1002/cjce.24424.10.1002/cjce.24424 ↗
12. Grace, T.M.., AIChE Symp. Ser. 72: 73(1976).10.1017/S007418090000872X ↗
13. Euhus, D.D., “Nucleation in bulk solutions and crystal growth on heat transfer surfaces during evaporative crystallization of salts composed of Na2CO4 and Na2SO4,” Ph.D. thesis, Georgia Institute of Technology, Atlanta, 2003.
14. Karlsson, E., Gourdon, M., and Olausson, L., et al., Nord. Pulp Pap. Res. J. 28(4): 506(2013). https://doi.org/10.3183/npprj-2013-28-04-p506-513.10.3183/npprj-2013-28-04-p506-513 ↗
15. Gourdon, M., Vamling, L., Andersson, U., et al., Ind. Eng. Chem. Res. 49(5): 2401(2010). https://doi.org/10.1021/ie901390c.10.1021/ie901390c ↗
16. Vanchinathan, S. and Krishnagopalan, G.A., TAPPI J. 80(3):123(1997).
17. Cleveland, C., TAPPI J. 73(11): 157(1990).
18. Trung, T. and Allison, B., O Papel 76(1): 47(2015).10.1057/9781137494801_4 ↗
19. Verrill, C.L. and DeMartini, N.A., “Evaporator boilout guidelines,” TAPPI Eng., Pulping Environ. Conf., TAPPI Press, Atlanta, 2006.
20. Karlsson, E., Vamling, L., Olausson, L., et al., Ind. Eng. Chem. Res. 53(50): 19600(2014). https://doi.org/10.1021/ie5037353.10.1021/ie5037353 ↗
21. Karlsson, E., Vamling, L., Gourdon, M., et al., J-FOR 4(6): 23(2014).
22. Karlsson, E., Nord. Pulp Pap. Res. J. 35(4): 516(2020). https://doi.org/10.1515/npprj-2020-0038.10.1515/npprj-2020-0038 ↗
23. Saturnino, D.M., “Modeling of kraft mill chemical balance.,” Ph.D. thesis, University of Toronto, Toronto, 2012.
24. Rogerson, A., “Dynamic modelling of process chemistry in kraft pulp mills,” MASc thesis, University of Toronto, Toronto, 2022.
25. Frederick, W.J., “Properties relevant to evaporation,” in Black Liquor Evaporation (W.J. Frederick and N. DeMartini, Eds.), TAPPI Press, Peachtree Corners, GA, USA, 2019.
26. Smith, J.B., “Sodium salt scaling in falling film black liquor evaporators,” Ph.D. thesis, Georgia Institute of Technology, Atlanta, 2000.
27. Zaman, A., Wight, M.O., and Fricke, A.L., TAPPI J. 77(8): 175(1994).