Effects of metal surface morphology on deposition behavior of microstickies from papermaking white water
Source abstract
Abstract
Deposition of small adhesive particles, called microstickies, onto pulp processing equipment and paper machines causes quality and operational problems for recycling mills. The factors that control deposition of microstickies onto surfaces of metal parts remain unclear. In this work, aluminum surfaces with a range of surface roughness were exposed to slurries containing micros-tickies. The deposition results showed that flat surfaces promote the aggregation and deposition of microstickies particles. Uneven surfaces tended to favor deposition of smaller microstickies, 0.2–1 μm, which may be related to greater contact area presented by the rougher surface. This work provides insights into the deposition of microstickies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Recycling and Waste Management Techniques · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Zhang, Z., Lan, D., Zhou, P., et al., Cellulose 24(1): 311(2017). https://doi.org/10.1007/s10570-016-1104-x.10.1007/s10570-016-1104-x ↗
2. Monte, M., Sánchez, M., Blanco, A., et al., Chem. Eng. Res. Des. 90(10): 1491(2012). https://doi.org/10.1016/j.cherd.2012.01.012.10.1016/j.cherd.2012.01.012 ↗
3. Heise, O.U., Kemper, M., Wiese, H., et al., TAPPI J. 83(3): 73(2000).
4. Pei, J.C., Zheng, X.L., Zhang, D.X., et al., China Pulp Pap. 33(4):1(2014).
5. Carreo, R.M., Martín, A., Blanca, E., et al., Ind. Eng. Chem. Res. 47(16): 6239(2008). https://doi.org/10.1021/ie701718u.10.1021/ie701718u ↗
6. MacNeil, D., Miranda, R., Monte, M.C., et al., Ind. Eng. Chem. Res. 49(10): 4933(2010). https://doi.org/10.1021/ie9018098.10.1021/ie9018098 ↗
7. Miranda, R., Blanco, A., Negro, C., et al., Cellul. Chem. Technol. 40(9): 775(2006).
8. Hubbe, M.A., Rojas, O.J., and Venditti, R.A., Nord. Pulp Pap. Res. J. 21(2): 154(2006). https://doi.org/10.3183/npprj-2006-21-02-p154-171.10.3183/npprj-2006-21-02-p154-171 ↗
9. Wilhelm, D.K., Makris, S.P., and Banerjee, S., TAPPI J. 82(12):63(1999).
10. Zhang, Z.Y., Feng, Q.M., Li, B., et al., China Pulp Pap. 37(5): 33(2018).
11. Blanco, A., Miranda, R., Negro, C., et al., TAPPI J. 6(1): 19(2007).10.32964/TJ6.1.19 ↗
12. Doshi, M., Dyer, J., Aziz, S., et al., “Quantification of micro stick-ies,” in Paper Recycling Challenge—Process Control & Mensuration, Doshi & Associates, Appleton, WI, USA, 1997, pp. 119-122.
13. Richardson, D., Lee, R., Stack, K., et al., Appita Annu. Conf. 65(4): 48(2012).
14. Doshi, M.R., Blanco, A., Negro, C., et al., Progr. Pap. Recycl. 12(4): 35(2003).
15. Chen, J.X., Paper Chemicals (05): 16(2007).
16. Necˇasc, D. and Klapetek, P., Open Phys. 10(1): 181(2012). https://doi.org/10.2478/s11534-011-0096-2.10.2478/s11534-011-0096-2 ↗
17. Pan, S., Guo, R., and Xu, W., AIChE J. 60(8): 2752(2014). https://doi.org/10.1002/aic.14517.10.1002/aic.14517 ↗
18. Wang, Z.W., Li, B., Wu, S.B., et al., BioResources 7(4): 5794(2012).10.15376/biores.7.4.5794-5808 ↗
19. Tang, Y.N., Geng, S.F., Houtman, C., et al., TAPPI J. 18(3): 183(2019). https://doi.org/10.32964/TJ18.3.183.10.32964/TJ18.3.183 ↗
20. Wang, Z.W., “Measurement of the micro stickies in process waste paper recovery and research on their stability,” Ph.D. thesis, South China University of Technology, Guangzhou, Guangdong, China, 2013.
21. Tang, Y.N., Li, B., Wang, Z.W., et al., China Pulp Pap. 35(09): 1(2016).
22. Geng, S.F., Li, B., Tang, Y.N., et al., China Pulp Pap. 36(12): 1(2017).
23. da Silva, L.F.M., Öchsner, A., and Adams, R.D., Eds., Handbook of Adhesion Technology, Springer-Verlag, Berlin/Heidelberg, 2011. https://doi.org/10.1007/978-3-642-01169-6.10.1007/978-3-642-01169-6 ↗
24. Ebnesajjad, S., “Introduction and adhesion theories,” in Handbook of Adhesives and Surface Preparation: Technology, Applications and Manufacturing (S. Ebnesajjad, Ed.), William Andrew, Norwich, NY, USA, 2011, pp. 3-13. https://doi.org/10.1016/B978-1-4377-4461-3.10001-X.10.1016/b978-1-4377-4461-3.10001-x ↗
25. Rieger, J., Polym. Test. 20(2): 199(2001). https://doi.org/10.1016/S0142-9418(00)00023-4.10.1016/S0142-9418(00)00023-4 ↗