Impact of refining intensity on energy reduction in commercial refiners: effect of primary-stage consistency
Source abstract
Abstract
The specific refining energy required to obtain a given pulp quality can be reduced by increasing refining intensity. The simplest approach is to reduce refining consistency. Mill trials in a two-staγe TMP (thermomechanical pulp) system showed a 7% reduction in total specific energy when consistency in the primary refiner was reduced from 50% to 38%. Target freeness in the discharge from the secondary refiner was 200 mL CSF. Similar results were obtained in a single-stage RMP (refiner mechanical pulp) system. Decreasing the consistency from 52% to 34% reduced the specific energy by approximately 15%. The results suggest that the magnitude of the energy savings depends on the mill's normal consistency level and on the final discharge freeness. The potential benefits are smaller for mills already operating at low consistencies, and savings shrink as the target pulp freeness decreases. Application : specific refining energy for mechanical pulps can be reduced by reducing refining consistency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mineral Processing and Grinding · Electrical and Bioimpedance Tomography · Energy Efficiency and Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.