Understanding the risks and rewards of using 50% vs. 10% strength peroxide in pulp bleach plants
Source abstract
Abstract
The use of 50% concentration and 10% concentration hydrogen peroxide were evaluated for chemical and mechanical pulp bleach plants at storage and at point of use. Several dangerous occurrences have been documented when the supply of 50% peroxide going into the pulping process was not stopped during a process failure. Startup conditions and leaking block valves during maintenance outages have also contributed to explosions. Although hazardous events have occurred, 50% peroxide can be stored safely with proper precautions and engineering controls. For point of use in a chemical bleach plant, it is recommended to dilute the peroxide to 10% prior to application, because risk does not outweigh the benefit. For point of use in a mechanical bleach plant, it is recommended to use 50% peroxide going into a bleach liquor mixing system that includes the other chemicals used to maintain the brightening reaction rate. When 50% peroxide is used, it is critical that proper engineering controls are used to mitigate any risks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Brogdon, B.N. and Hart, P.W., in Bleaching of Pulp (P.W. Hart and A.W. Rudie, Eds.) 5th Edn., TAPPI Press, Atlanta, GA, USA, 2012, Chap. 10.
2. Presley, J.R. and Hill, R.T., in Pulp Bleaching, Principles and Practice (C.W. Dense and D.W. Reeves, Eds.), TAPPI Press, Atlanta, 1996, Chap. 1, Sec. 5.
3. Hart, P.W. and Hsieh, J.S., Tappi J. 74(11): 117(1991).10.32964/TJ74.11.117 ↗
4. Hoekstra, G., “Explosion rocks mill, two workers injured by blast,” Prince George Citizen, Prince George, BC, Canada, 8 Feb. 2007.
5. Staff, “Ruptured pump may figure into Evadale mill explosion,” Beaumont Enterprise, Beaumont, TX, USA, 18 Aug. 2001.
6. Mackenzie, J., Chem. Eng. 97(6): 1990(84).10.1007/BF00485008 ↗
7. Stora Enso, “Environmental Statement 2009,” Skoghall mill, Stora Enso, Helsinki, Finland, 28 June 2010.
8. Hart, P.W. and Rudie, A.W., “Hydrogen peroxide—An environmen-tally friendly but dangerous bleaching chemical,” TAPPI Eng., Pulping Environ. Conf., TAPPI Press, Atlanta, 2007.
9. Hart, P.W., Houtman, C., Melenkevitz, G., et al., “Hydrogen perox-ide (H2O2) safe storage and handling,” TAPPI Technical Information Paper, TIP 0606-24, TAPPI, Atlanta, 2017.
10. Hart, P.W. and Rudie, A.W., Chem. Eng. Educ. 45(1): 15(2011).
11. Hart, P.W and Rudie, A.W., Pulp Pap. Can. 111(4): T60(2010).
12. Makkonen, H.P., “Decomposition of hydrogen-peroxide in
13. dilute alkaline aqueous solutions,” Ph.D. thesis, University of Washington, Seattle, WA, USA, 1971.
14. Hart, P.W., Houtman, C., and Hirth, K., TAPPI J. 12(7): 59(2013).10.32964/TJ12.7.59 ↗
15. Schumb, W.C., Satterfield, C.N., and Wentworth, R.L., “Hydrogen peroxide,” ACS Monograph No. 128, Reinhold Publishing, New York, 1955, p. 526.
16. Raines, J.C., Schmidt, J.P., Burelach, J.P., et al., J. Therm. Anal. Calorim. 85(1): 53(2006).10.1007/s10973-005-7343-y ↗
17. Solvay Chemicals, “Material safety data sheet,” North American version, Solvay America, Houston, TX, USA, 9 Aug. 2013. Available [Online] http://www.h2o2.com/files/Solvay%2050%20H2O2%20 SDS%20All%20Grades.pdf <8Nov2018>.