Development of paper quality parameter measurement in China
Source abstract
Abstract
Paper quality parameters are important indicators of paper production, such as paper moisture, basis weight, ash content, strength, and so on. This study focuses on the online measurement methods and development of paper basis weight, moisture, and ash measuring. First, the measurable paper parameters and quality control system products in China are analyzed. Then, the basis weight measurement methods, accuracy, and development are given in the range of 10~1000 g/m2. Third, the distinction between infrared and microwave methods for moisture measurement is discussed. Finally, the ash measurement is introduced. Production and consumption of tissue paper in China have continually increased during the past decade. Near-infrared light technology is mature for the measurement of paper parameters in the range of 10~200 g/m2 basis weight. However, the near-infrared online measurement of tissue paper is not widely used, and few tissue paper lines are equipped with this type of quality control system in China. Therefore, technology for near-infrared measurement of basis weight has a great potential market in the field of tissue paper production. This article analyzes the future development trend of near-infrared light in tissue paper basis weight measurement and summarizes the difficulties in near-infrared light measurement of tissue paper basis weight.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Industrial Vision Systems and Defect Detection · Water Quality Monitoring and Analysis · Spectroscopy and Chemometric Analyses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Chen, Y., Du, S., and Yuan, Z., “Fast detection of quality parameters of finished products based on near-infrared spectroscopy,” Chin. J. Anal. Lab. (10): 112(2013).
2. Wang, M., Sun, Y., Tang, W., et al., Pulping and Papermaking Process Measurement and Control System and Engineering, Chemical Industry Press, Beijing, 2003.
3. Tang, W., Wang, M., and Chen, Y., “The realization of an imported QCS transformation,” China Pulp Pap. 23(7): 27(2004).
4. Wang, M., Tang, W., Chen, Y., et al., “Imported B/M meter trans-formation (1)—Analysis and simulation of transmission algorithm,” J. Shaanxi Univ. Sci. 22(1):66(2004).
5. Wu, X. and Xue, X., “Introduction of Honeywell Quality Control System (QCS) in the paper industry,” Technol. Innovation Appl. 3(25): 67(2013).
6. Anon., “Honeywell 4000 scanner system manual 6510020200,” Honeywell International, Charlotte, NC, USA.
7. Anon., “Voith launched a new generation of sensor technology,” China Pulp Pap. Ind. 41(8): 75(2020).
8. Anon., “Honeywell Da Vinci operators manual,” Honeywell International, Charlotte, NC, USA.
9. Zhou, L., Printing Design, Huazhong University of Science and Technology Press, Wuhan, China, 2008.
10. Chen, X., “Research on multi-motor synchronous control system of paper machine division drive,” Ph.D. dissertation, Shandong University, Jinan, China, 2009.
11. Zhong, J., “Design of an online detection system for paper param-eters based on Python,” Ph.D. dissertation, Chang’an University, Xi’an, China, 2019.
12. Hu, L., Li, X., and Tang, W., “A large-scale high-precision basis weight sensor,” China Pulp. Pap. 30(02): 46(2011).
13. Hu, L., Li, X., and Tang, W., “Research on using β-ray to accurately measure the basis weight of paper,” Nucl. Electron. Detect. Technol. 33(7): 869(2013).
14. Hu, L.H., Li, X.P., and Tang, W., Appl. Mech. Mater. 511-512: 185(2014). https://doi.org/10.4028/www.scientific.net/AMM.511-512.185.10.4028/www.scientific.net/AMM.511-512.185 ↗
15. Hu, L., “Research on on-line accurate measurement technology of basis weight and thickness of high basis weight cardboard,” Ph.D. dissertation, Shaanxi University of Science and Technology, Xi’an, China, 2015.
16. Li, G., Hou, Y., Zhou, D., et al., “The selection of radioactive source intensity in paper basis weight detection,” Nucl. Electron. Detect. Technol. 29(5): 1189(2009).
17. Li, Y., Hou, Y., Xiao, D., et al., “Application of pre-amplification digi-tization of β ionization chamber in paper basis weight measure-ment,” Instrum. Test. Technol. 29(3): 71(2010).
18. Zhou, Q. and Han, J., “Paper basis weight signal processing based on Butterworth filter,” China Pulp Pap. 25(9): 27(2006).
19. Sun, Y., Zhou, Q., and Wang M., “Research and improvement on the temperature drift of domestic basis weight meter,” China Pulp Pap. 24(9): 29(2003).
20. Li, W., “Near-infrared paper basis weight moisture measurement method,” China pat. CN1800825 (Jul. 12, 2006).
21. Hou, Y., Li, Y., Li, G., et al., “Research on integrated measurement of paper basis weight and moisture,” Instrum. Test. Technol. 29(4): 60(2010).
22. Hou, Y., Su, H., Gao, H., et al., “Research on the measurement of paper basis weight by low-energy γ-ray backscattering method,” Nucl. Electron. Detect. Technol. 21(2): 148(2001).
23. Ye, W. and Sun, Y., “Infrared optical system for measuring moisture in high basis weight paper,” Laser Infrared 30(04): 230(2000).
24. Dong, P., “Research on paper moisture and basis weight measure-ment technology based on near infrared rays,” Ph.D. dissertation, Changan University, Xi’an, China, 2009.
25. Kangasrääsiö, J., Measurement 44(10): 1937(2011). https://doi.org/10.1016/j.measurement.2011.08.024.10.1016/j.measurement.2011.08.024 ↗
26. Liu, Y., “Research on on-line measurement technology of paper moisture content based on microwave cavity,” University of Electronic Science and Technology of China, Chengdu, China, 2013.
27. Li, Q., Zhang, M., Song, S., et al., “Paper ash content rapid deter-mination device and method,” China Pulp Pap. 34(04): 56(2015).
28. Hu, L., Lu, X., and Ma, J., BioResources 15(1): 2096(2020).10.15376/biores.15.4.Hu ↗
29. Gu, J. and Sun, Y., “On-line detection of paper ash content and development of ash content meter,” Trans. China Pulp Pap. (00):19(1993).
30. Ou, X., “Research on paper ash meter,” Proc. Autom. Instrum. 19(7): 4(1998).
31. Feng, D. and Sun, Y., “On-line measuring instrument for paper ash content,” Acta Metrologica Sinica 19(1): 52(1998).
32. Xiao, Z., “On-line detection and control of paper ash content,” China Pulp Pap. 31(09): 45(2012).
33. Hofman, G.J., U.S. pat. 7,376,215 B2 (May 20, 2008).
34. Guo, W., Wang, R., Huang, X., et al., “Paper ash content online detector,” Techniques of Automation and Applications (02): 37(1996).
35. Anon., “China paper industry 2019 annual report,” China Pulp Pap. Ind. 41(11): 16(2020).
36. Chen, K. and Zhang, X., “Several issues on the independent innova-tion strategy research of my country’s pulp and paper equipment manufacturing industry,” China Pulp Pap. Ind. 27(6): 6(2006).
37. Cao, Z., “Retrospect and prospect of China’s paper industry,” China Paper Newsletters (06): 10(2006).
38. GB/T 451.2-2002 “Determination of basis weight of paper and cardboard,” National Standard of the People’s Republic of China.
39. Voith, “Fiber weight and moisture without radioactive source,” Prof. Papermaking 9(2): 36(2012).
40. Valmet, “Valmet launches IQ Range for quality control,” Paper Asia 31(5): 14(2015).
41. ABB, “ABB introduces new HPIR-FW sensor to reduce energy and fibre costs,” Paper Asia 28(6): 38(2012).
42. Uutela, E., “Global household paper consumption development trend forecast,” China Pulp Pap. Ind. 41(11): 60(2021).
43. Wen, X., “Discussion on the performance of basis weight moisture control system,” China Pulp Pap. 21(5): 63(2002)
44. Raunio,J.-P. and Ritala, R., J. Process Control 72: 74(2018).https://doi.org/10.1016/j.jprocont.2018.09.012.10.1016/j.jprocont.2018.09.012 ↗
45. Huang, L., Huang, X., and Zhao, Z., “Analysis of advantages and development trend of paper quality control system,” Mech. Electr. Eng. Technol. 50(01): 19(2021).
46. Luo, Z., Huang, Y., Xie, Q., et al., “Application and development of automation control system in energy-saving transformation of paper industry,” Pop. Sci. Technol. 21(10): 35(2019).
47. Li, Q., “Design of papermaking quality control system based on industrial Ethernet,” Ph.D. dissertation, Chongqing University, Chongqing, China, 2013.
48. Chen, G., Zhang, K., and Ma, C., “Paper quality control based on Siemens control system,” Pap. Pap. Making 28(05): 60(2009).