Numerical analysis of slot die coating of nanocellulosic materials
Source abstract
Abstract
Nanocellulosic coatings as a food packaging material are of commercial interest due to their nontoxic nature, renewability, and excellent barrier properties. Complex shear-thinning rheology poses challenges in designing and sizing equipment to pump, mix, and process the suspension and actual coating process. This study aims to determine the effectiveness of computational fluid dynamics (CFD) in predicting nanocellulosic suspension flow in light of existing rheological data. We employ and compare three distinct rheological models to characterize the rheology and flow of nanocellulose suspensions through a slot die coater, where the model parameters are established from existing slot rheometry measurements. A volume-of-fluid (VoF) based finite volume method is employed to simulate the flow in a slot die operated in an unconventional metering mode. Results with the Casson model predict the presence of unyielded regions in the flow, which was not captured using the power law model. These stagnation regions will incur coatability issues stemming from flow intermittencies and lead to potential defects in the coating layer, including fracture. The results suggest that a rheological model that includes yield stress should be considered while modeling such flows. A need for better rheological data to model nanocellulosic flows, especially at high consistencies and shear rates, is also highlighted.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Material Properties and Processing · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Osong, S.H., Norgren, S., and Engstrand, P., Cellulose 23(1):93(2016). https://doi.org/10.1007/s10570-015-0798-5.10.1007/s10570-015-0798-5 ↗
2. Kargarzadeh, H., Ioelovich, M., Ahmad, I., et al., Handbook of Nanocellulose and Cellulose Nanocomposites, Wiley-VCH Verlag, Weinheim, 2017, pp. 1-47.https://doi.org/10.1002/9783527689972.ch1.10.1002/9783527689972 ↗
3. Kumar, V., Bollström, R., Yang, A., et al., Cellulose 21(5):3443(2014). https://doi.org/10.1007/s10570-014-0357-5.10.1007/s10570-014-0357-5 ↗
4. Chinga-Carrasco, G., Nanoscale Res. Lett. 6(1): 417(2011). https://doi.org/10.1186/1556-276X-6-417.10.1186/1556-276X-6-417 ↗
5. Abitbol, T., Rivkin, A., Cao, Y., et al., Curr. Opin. Biotechnol. 39(I): 76(2016). https://doi.org/10.1016/j.copbio.2016.01.002.10.1016/j.copbio.2016.01.002 ↗
6. Kargarzadeh, H., Huang, J., Lin, N., et al., Prog. Polym. Sci. 87: 197(2018). https://doi.org/10.1016/j.progpolymsci.2018.07.008.10.1016/j.progpolymsci.2018.07.008 ↗
7. Ventura, C., Pinto, F., Lourenço, A.F., et al., Cellulose 27(10): 5509(2020). https://doi.org/10.1007/s10570-020-03176-9.10.1007/s10570-020-03176-9 ↗
8. Ferrer, A., Pal, L., and Hubbe, M., Ind. Crops Prod. 95: 574(2017). https://doi.org/10.1016/j.indcrop.2016.11.012.10.1016/j.indcrop.2016.11.012 ↗
9. Silva, F.A.G.S., Dourado, F., Gama, M., et al., Nanomaterials 10(10): 2041(2020). https://doi.org/10.3390/nano10102041.10.3390/nano10102041 ↗
10. Syverud, K. and Stenius, P., Cellulose 16(1): 75(2009). https://doi.org/10.1007/s10570-008-9244-2.10.1007/s10570-008-9244-2 ↗
11. Tayeb, A.H., Tajvidi, M., and Bousfield, D., Molecules 25(6):1344(2020). https://doi.org/10.3390/molecules25061344.10.3390/molecules25061344 ↗
12. Lavoine, N., Desloges, I., Khelifi, B., et al., J. Mater. Sci. 49(7): 2879(2014). https://doi.org/10.1007/s10853-013-7995-0.10.1007/s10853-013-7995-0 ↗
13. Mazhari Mousavi, S.M., Afra, E., Tajvidi, M., et al., Progr. Org. Coat. 122: 207(2018). https://doi.org/10.1016/j.porgcoat.2018.05.024.10.1016/j.porgcoat.2018.05.024 ↗
14. Shanmugam, K., Varanasi, S., Garnier, G., et al., Cellulose 24(7): 2669(2017). https://doi.org/10.1007/s10570-017-1328-4.10.1007/s10570-017-1328-4 ↗
15. Mazhari Mousavi, S.M., Afra, E., Tajvidi, M., et al., Cellulose 24(7): 3001(2017). https://doi.org/10.1007/s10570-017-1299-5.https://doi.org/10.1007/s10570-019-02908-w.10.1007/s10570-017-1299-5 ↗
16. Koponen, A.I., Cellulose 27(4): 1879(2020). https://doi.org/10.1007/s10570-019-02908-w.10.1007/s10570-019-02908-w ↗
17. Guezennec, C., Girard, F., Dufresne, A., et al., Rev. ATIP 70:6(2016).
18. Svending, P., Kritzinger, J., Phipps, J., et al., “Development of cor-rugated board surfaces suitable for water intensive printing,” TAPPI PaperCon, TAPPI Press, Peachtree Corners, GA, USA, 2018.
19. Chowdhury, R.A., “Roll-to-roll fabrication of cellulose nanocrystal nanocomposite for gas barrier and thermal management applica-tions, “ Ph.D. thesis, Purdue University, West Lafayette, IN, USA, 2019.
20. Kumar, V., Elfving, A., Koivula, H., et al., Ind. Eng. Chem. Res. 55(12): 3603(2016). https://doi.org/10.1021/acs.iecr.6b00417.10.1021/acs.iecr.6b00417 ↗
21. Nazari, B., Kumar, V., Bousfield, D.W., et al., J. Rheol. 60(6): 1151(2016). https://doi.org/10.1122/1.496033610.1122/1.4960336 ↗
22. Kumar, V., Nazari, B., Bousfield, D.W., et al., Appl. Rheol. 26(4):1(2016).
23. Kontturi, E., Tammelin, T., and Österberg, M., Chem. Soc. Rev. 35(12): 1287(2006). https://doi.org/10.1039/B601872F.10.1039/B601872F ↗
24. Saarikoski, E., Saarinen, T., Salmela, J., et al., Cellulose 19(3): 647(2012). https://doi.org/10.1007/s10570-012-9661-0.10.1007/s10570-012-9661-0 ↗
25. Akbarzadeh, V. and Hrymak, A.N., AIChE J. 62(6): 1933(2016). https://doi.org/10.1002/aic.15187.10.1002/aic.15187 ↗
26. Carvalho, M.S. and Kheshgi, H.S., AIChE J. 46(10): 1907(2000). https://doi.org/10.1002/aic.690461003.10.1002/aic.690461003 ↗
27. Deshpande, S.S., Anumolu, L., and Trujillo, M.F., Comput. Sci. Discovery 5(1): 014016(2012). https://doi.org/10.1088/1749-4699/5/1/014016.10.1088/1749-4699/5/1/014016 ↗
28. Hirt, C.W. and Nichols, B.D., J. Comput. Phys. 39(1): 201(1981). https://doi.org/10.1016/0021-9991(81)90145-5.10.1016/0021-9991(81)90145-5 ↗