Resource efficiency in deinked pulp production: a review
Source abstract
Abstract
The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Minerals Flotation and Separation Techniques · Recycling and Waste Management Techniques · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Ervasti, I., in Papermaking Science and Technology 7. Recycled Fibre and Deinking (U. Höke and S. Schabel, Eds.), 2nd edn., Finnish Paper Engineers’ Association, Helsinki, Finland, 2010, p. 11.
2. Schmidt, J.H., Holm, P., Merrild, A., et al., Waste Manage. 27(11): 1519(2007).10.1016/j.wasman.2006.09.004 ↗
3. Villanueva, A. and Wenzel, H., Waste Manage. 27(8): S29(2007).10.1016/j.wasman.2007.02.019 ↗
4. Hudson, B.W., Paper360° 6(5): 14(2011).10.1016/S1353-4858(11)70063-0 ↗
5. Miranda, R., Monte, M.C., and Blanco, A., Waste Manage. 31(11): 2208(2011).10.1016/j.wasman.2011.06.006 ↗
6. Moore, B., Official Board Markets 87(21): 8(2011).
7. Mäkinen, L., “Improvement of resource efficiency in deinked pulpmill,” Acta Univ. Ouluensis, C 450, University of Oulu, Oulu, Finland, 2013.
8. Monte, M.C., Fuente, E., Blanco, A., et al., Waste Manage. 29(1): 293(2009).10.1016/j.wasman.2008.02.002 ↗
9. Jaakko Pöyry Consulting AB, “Deinking developments,” Tummavuoren Kirjapaino Oy, Vantaa, Finland, 1995.
10. Haynes, D., Malloch, J., Cuddy, K., et al., Prog. Pap. Recycl. 18(3): 12(2009).
11. Hamm, U., in Papermaking Science and Technology 7. Recycled Fibre and Deinking (U. Höke and S. Schabel, Eds.), 2nd edn., Finnish Paper Engineers’ Association, Helsinki, Finland, 2010, p. 562.
12. Renner, K., in Papermaking Science and Technology 7. Recycled Fibre and Deinking (L. Göttsching and H. Pakarinen Eds.) 1st edn., Fapet Oy, Helsinki, Finland, 2000, p. 266.
13. Carré, B., Zeno, E., and Huber, P., PTS-CTP Recycl. Symp., Papiertechnische Stiftung, Heidenau, Germany, 2012, p. 245.
14. Schabel, S. and Holik, H., in Papermaking Science and Technology 7. Recycled Fibre and Deinking (U. Höke, and S. Schabel, Eds.), 2nd edn., Finnish Paper Engineers’ Association, Helsinki, Finland, 2010, p. 122.
15. Ben, Y., Dorris, G., and Page, N., Pulp Pap. Can. 205(11): 28(2004).
16. Carré, B., Vernac, Y., and Beneventi, D., Pulp Pap. Can. 102(6): 33(2001).
17. Hanecker, E., Prog. Pap. Recycl. 16(4): 34(2007).
18. Korpela, A., “The recylcability of fibre,” PSC Communications 96, KCL Paper Science Centre, Espoo, Finland, 1996.
19. Mäkinen, L., Ämmälä, A., Pirkonen, P., et al., IPW 1: 36(2012).
20. Perrin, B. and Julien-Saint-Amand, F., “Deinking rejects analysis in newsprint and copy paper mills,” PTS-CTP Symp., 12th, Papiertechnische Stiftung, Heidenau, Germany, 2006.
21. Mäkinen, L., Körkkö, M., Ämmälä, A., et al., TAPPI PEERS Conf., TAPPI PRESS, Atlanta, GA, USA, 2011, p. 381.
22. Mäkinen, L., Körkkö, M., Ämmälä, A., et al., TAPPI J. 11(11): 53(2012).10.1016/j.resconrec.2013.01.011 ↗
23. Grossmann, H., “The limits of paper recycling – an European approach to identify and extend the limits of paper recycling in Europe,” Res. Forum Recycl., 8th, TAPPI PRESS, Atlanta, 2007.
24. Borschke, D., Gehr, V., and Mönnigmann, R., Das Papier 41(6A): V146(1997).
25. Ämmälä, A., Mäkinen, L., and Niinimäki, J., TAPPI J. 12(3): 9(2013).10.32964/TJ12.3.43 ↗
26. Dorica, J. and Simandl, J., TAPPI J. 78(5): 109(1995).
27. Chaiarrekij, S., Dhingra, H., and Ramarao, B.V., Resour., Conserv. Recycl. 28(3–4): 219(2000).10.1016/S0921-3449(99)00046-4 ↗
28. Noda, T., Tsuji, H., Tosaka, M., et al., “CV-jet treatment for process water and flotation rejects in deinking,” Res. Forum Recycl., 9th, TAPPI PRESS, Atlanta, 2010.
29. De Jong, R. and Pescantin, M., “Flotation of forward cleaner rejects removes high density stickies,” TAPPI Eng., Pulping Environ. Conf., TAPPI PRESS, Atlanta, 2005.
30. Ben, Y., Dorris, G., and Page, N., Prog. Pap. Recycl. 15(2): 25(2006).10.1016/S0277-5387(06)00472-4 ↗
31. Matzke, W.H., Selder, H.H., and Wyss, S-E., J. Korea TAPPI 28(1): 73(1996).
32. Fjallstrom, R., Knoke, T., Griffin, A., et al., “Fiber recovery for stock washer filtrate to optimize yield in a mixed office papers deinking plant,” TAPPI Fall Tech. Conf. Trade Fair, TAPPI PRESS, Atlanta, 2002.
33. Abou-Elela, S.I., Nasr, F.A., Ibrahim, H.S., et al., J. Cleaner Prod. 16(3): 330(2008).10.1016/j.jclepro.2006.07.045 ↗
34. Heise, O., Wiese, H., Kemper, M., et al., TAPPI J. 83(3): 74(2000).
35. Engert, P. and Haveri, M., Wochenbl. Papierfabr. 132(19): 1162(2004).10.1111/j.1525-1497.2004.40801e.x ↗
36. DeLozier, G., Zhao, Y., Deng, Y., et al., TAPPI J. 4(10): 25(2005).
37. Robertson, N., Patton, M., Pelton, R., TAPPI J. 81(6): 138(1998).
38. Dessureault, S., Carabin, P., Thom, A., et al., Prog. Pap. Recycl. 8(1): 23(1998).
39. Dessureault, S., Levesque, M., and Barbe, M.C., TAPPI Recycl. Symp., TAPPI PRESS, Atlanta, 1995, p. 251.
40. Vashisth, S., Bennington, C.P.J., Grace, J.R., et al., Resour., Conserv. Recycl. 55(12): 1154(2011).10.1016/j.resconrec.2011.06.013 ↗
41. Moss, C.S. and Kovacs, D., TAPPI Recycl. Symp., TAPPI PRESS, Atlanta, 1994, p. 359.
42. Ochoa de Alda, J.A.G., Resour., Conserv. Recycl. 52(7): 965(2008).10.1016/j.resconrec.2008.02.005 ↗
43. Trutschler, J., TAPPI Recycl. Symp., TAPPI PRESS, Atlanta, 1999, p. 17.
44. Krigstin, S. and Sain, M., Pap. Technol. 46(7): 37(2005).10.1016/j.tetlet.2004.11.047 ↗
45. Krigstin, S. and Sain, M., Pulp. Pap. Can. 107(5): 29(2006).
46. Aitken, M.N., Evans, B., Lewis, J.G., Soil Use Manage. 14(4): 215(1998).10.1111/j.1475-2743.1998.tb00153.x ↗
47. Barriga, S., Mendez, A., Camara, J., J. Therm. Anal. Calorim. 99(3): 981(2010).10.1007/s10973-010-0692-1 ↗
48. Camberato, J.J., Gagnon, B., Angers, D.A., et al., Can. J. Soil Sci. 86(4): 641(2006).10.4141/S05-120 ↗
49. Engel, P. and Moore, B., Pulp Pap. 72(4): 83(1998).10.1023/A:1022956308491 ↗
50. Filiatrault, P., Camire, C., Norrie, J.P., et al., Resour., Conserv. Recycl. 48(3): 209(2006).10.1016/j.resconrec.2006.02.001 ↗
51. Trepanier, L., Gallichand, J., Caron, J., et al., Trans. ASAE 41(5): 1279(1998).10.13031/2013.17300 ↗
52. Webb, L., Pulp. Pap. Int. 42(8): 24(2000).
53. Fitzpatrick, J. and Seiler, G.S., TAPPI Eng. Conf., TAPPI PRESS, Atlanta, 1994, p. 1059.
54. Frederic, W.M.J., Iisa, K., Lundy, J.R., et al., TAPPI J. 79(6): 123(1996).
55. Gavrilescu, D., Environ. Eng. Manage. J. 7(5): 537(2008).10.30638/eemj.2008.077 ↗
56. Gidner, A. and Stenmark, L., Invest. Tec. Pap. 39(148): 60(2002).
57. Kay, M., “Development of waste management option for paper sludge,” Recycl. Technol. Conf., 7th, Pira International, Leatherhead, UK, 2002.
58. Lou, R., Wu, S., Lv, G., et al., Appl. Energy 90(1): 46(2012).10.1016/j.apenergy.2010.12.025 ↗
59. Mendez, A., Fidalgo, J.M., Guerrero, F., et al., J. Anal. Appl. Pyrolysis 86(1): 66(2009).10.1016/j.jaap.2009.04.004 ↗
60. Ouadi, M., Brammer, J., Hornung, A., et al., TAPPI J. 11(2): 55(2012).10.32964/TJ11.2.55 ↗
61. Dahlblom, B., Dahlin, J., Larsson, M.E., et al., U.S. pat. 2004/0020616, (Feb. 5, 2004).
62. Kunesh, C.J., Watts, M., and Higgs, R.P., “Production of synthetic calcium carbonate (SCC) for paper coating and other applications from recycled paper sludge ash,” Res. Forum Recycl., 9th, TAPPI PRESS Atlanta, 2010.
63. Higgs, R.P. and Roux, F., “The recovery of pure calcium carbonate from paper sludge ash,” PTS-CTP Symp., Papiertechnische Stiftung, Heidenau, Germany, 2010.
64. Albinas, G. and Zivile, L., J. Civ. Eng. Manage. 9(3): 198(2003).
65. Biermann, J.J.P., Voogt, I.N., and Valk, I.M., Proc. Int. Conf. Fluid. Bed Combust., American Society of Mechanical Engineers, New York, 1999, p. 930.
66. Cernec, F., Zule, J., Moze, A., et al., Waste Manage. Res. 23(2): 106(2005).10.1177/0734242X05053662 ↗
67. Fava, G., Ruello, M.L., and Corinaldesi, V., J. Mater. Civ. Eng. 23(6): 772(2011).10.1061/(ASCE)MT.1943-5533.0000218 ↗
68. Blanco, A., Negro, C., Fuente, E., et al., Cellul. Chem. Technol. 42(1-3): 89(2008).
69. Gerischer, G.F.R., Can Wyk, W.J., Ysbrandy, R.E., et al., Wochenbl. Papierfabr. 126(20): 1008(1998).
70. Modolo, R., Ferreira, V.M., Machado, L.M., et al., Waste Manage. 31(2): 370(2011).10.1016/j.wasman.2010.09.017 ↗
71. Glenn, J., Prog. Pap. Recycl. 7(3): 54(1998).
72. Ilyina, A.D., Villarreal, S.J.A., Rivera, R.E., et al., Biocatalysis 41(6): 135(2000).
73. Likon, M. and Saarela, J., Macromol. Symp. 320(1): 50(2012).10.1002/masy.201251006 ↗
74. Carroll, T. and Reeves, W., Pulp Pap. 73(4): 79(1999).10.1046/j.1525-142x.1999.99002.x ↗
75. Scott., G.M. and Smith, A., TAPPI Recycl. Symp., TAPPI PRESS, Atlanta, 1995, p. 239.
76. Hynninen, P., in Papermaking Science and Technology 19. Environmental Management and Control (O. Dahl, Ed.), 2nd edn., Finnish Paper Engineers’ Association, Helsinki, Finland, 2008, p. 137.
77. Moilanen, A., Mörsky, P., Knuutinen, T., et al., Pap. Puu 82(8): 546(2000).
78. ule, F., Cernec, F., and Likon, M., Waste Manage. Res. 6(25): 538(2007).10.1177/0734242X07079188 ↗
79. Mäkinen, L., Ämmälä, A., Körkkö, M., et al., Resour., Conserv. Recycl. 73(1): 11(2013).10.1016/j.resconrec.2013.01.011 ↗