journal article·2008-09-01

Water release from fractionated stock suspension. Part 2. Effects of consistency, flocculants, shear, and order of mixing

MARTIN A. HUBBE, JOHN A. HEITMANN, CEDRIC A. COLE

TAPPI Journal· Volume 7· Issue 8
Publisher page

Abstract

The rate of gravity drainage from a papermaking stock suspension is highly dependent on the initial consistency of the stock, and on the presence of cellulosic fines. In this study, we fitted the results of testing to a model based on different linear contributions to drainage resistance from fibers and each type of fines. Deviations from the model at relatively high consistency were tentatively attributed to flocculation phenomena. Substantially higher rates of dewatering were achieved by selectively treating the fines, the fibers, or the combined furnish with cationic polyelectrolytes. Results were consistent with several mechanisms, which might act in parallel during ordinary papermaking. Attachment of cellulosic fines to fiber surfaces can prevent those fines from migrating to choke points within a wet web. Agglomeration of fines to each other can reduce their effective surface area. Flocculation of the fibers can make the fiber mat less uniform, thus providing larger channels for water to flow from the mat.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Material Properties and Processing · Landfill Environmental Impact Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Cole, C.A., Hubbe, M.A., and Heitmann, J.A., TAPPI J. 7(7): 28(2008).10.32964/TJ7.7.28 ↗
2. Britt, K.W. and Unbehend, J, Tappi 63(4): 67(1980).
3. Lindholm, C.-A., Paperi Puu 62(12): 803(1980).10.1016/S0300-9084(80)80136-2 ↗
4. Wegner, T., Tappi J. 70(7):107(1987).10.1111/j.1399-3054.1987.tb08705.x ↗
5. Karras, M. and Springer, A.M., Tappi J. 72(2): 155(1989).
6. Hubbe, M.A. and Heitmann, J.A., BioResources 2(3): 500(2007).10.15376/biores.2.4.500-533 ↗
7. Horn, D. and Melzer, J., Papier 29(12):534(1975).10.2524/jtappij.29.10_534 ↗
8. Bhardwaj, N.K., Kumar, S., and Bajpai, P.K., Colloids Surf. A. 260(1-3): 245(2005).10.1016/j.colsurfa.2005.03.011 ↗
9. Goossens, J.W.S. and Luner, P., Tappi 59(2):89(1976).
10. Gruber, E., Grossmann, K., and Schemp, W., Wochenbl. Papierfabr. 124(3): 102(1996).
11. Hubbe, M.A., Scientific and Technical Advances in Wet End Chemistry Proceedings, Pira International, Leatherhead, UK, 2002, Paper 3.
12. Sikora, M.D. and Stratton, R.A., Tappi 64(11): 97(1981).
13. Tanaka, H., Swerin, A., and Ödberg, L., Tappi J. 76(5): 157(1993).
14. Forsberg, S. and Ström, G., J. Pulp Paper Sci. 20(3): J71(1994).
15. Wang, F. and Hubbe, M.A., Colloids Surf. A. 194(1-3): 221(2001).10.1016/S0927-7757(01)00802-0 ↗
16. Hubbe, M.A., BioResources 1(1):116(2006).10.15376/biores.1.1.116-149 ↗
17. Hubbe, M.A., Rojas, O.J., Lucia, L.A., et al., Cellulose 14(6 ): 655(2007).10.1007/s10570-006-9098-4 ↗
18. Carman, P.C., Trans. Inst. Chem. Engrs. (London) 16: 168(1938).
19. Parker, J.D., The Sheet-Forming Process, TAPPI PRESS, Atlanta, Georgia, USA, 1972.
20. Strazdins, E., Tappi 60(7):113(1977).10.1016/S1474-6670(17)66232-3 ↗
21. Keothe, J.L., and Scott, W.E., Tappi J. 76(12):123(1993).
22. Farley, C.E., TAPPI J. 80(10): 177(1997).10.1088/2058-7058/10/2/19 ↗
23. Pfau, A., Schrepp, W., and Horn, D., Langmuir 15(9): 3219(1999).10.1021/la9808925 ↗
24. Gregory, J., J. Colloid Interface Sci. 55(1): 35(1976).10.1016/0021-9797(76)90006-0 ↗
25. Hubbe, M.A., Jackson, T.L., and Zhang, M., TAPPI J. 2(11): 7(2003).
26. Marton, J. Tappi 63(2): 121(1980).
27. Britt, K.W., Tappi 56(10): 46(1973).10.3168/jds.S0022-0302(73)85230-0 ↗
28. Britt, K.W. and Unbehend, J.E., Tappi 59(2): 67(1976).
29. Hubbe, M.A., Nordic Pulp Paper Res. J. 15(5): 545(2000).10.3183/npprj-2000-15-05-p545-553 ↗
30. Hubbe, M.A., Tappi J. 69(8): 116(1986).
31. Hubbe, M.A., BioResources 2(2): 296(2007).10.15376/biores.2.1.1-2 ↗