Multiple recycling of paperboard: Paperboard characteristics and maximum number of recycling cycles— Part I: Multiple recycling of corrugated base paper
Source abstract
Abstract
Paper for recycling is an important fiber source for the production of corrugated base paper. The change in production capacity toward more and more packaging papers affects the composition of paper for recycling and influences the paper quality. This research project investigated the influence of the multiple recycling of five different corrugated base papers (kraftliner, neutral sulfite semichemical [NSSC] fluting, corrugating medium, testliner 2, and testliner 3) on suspension and strength properties under laboratory conditions. The corrugated board base papers were repulped in a low consistency pulper and processed into Rapid-Köthen laboratory sheets. The sheets were then recycled up to 15 times in the same process. In each cycle, the suspension and the paper properties were recorded. In particular, the focus was on corrugated board-specific parameters, such as short-span compression test, ring crush test, corrugating medium test, and burst. The study results indicate how multiple recycling under laboratory conditions affects fiber and paper properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Advanced Cellulose Research Studies · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Verband Deutscher Papierfabriken e.V. (VDP), “Papier 2016,” VDP, Bonn, Germany, 2016.
2. FEFCO, “Annual Statistics 2017,” Brussels, Belgium. Available [Online] http://www.fefco.org/sites/default/files/documents/Fefco_AnnualEvaluation_2017_0.pdf <28Nov2019>.
3. FEFCO, “Annual Statistics 2005,” Brussels. Available [Online] http://www.fefco.org/sites/default/files/documents/Annual%20 Statistics%20Y%202005%202nd%20Release_Non_members.pdf <14Nov2019>.
4. Verein Recycling Papier + Karton, “FAQ,” Verein Recycling Papier + Karton, Bern, 2019. Available [Online] http://www.altpapier.ch/de/faq/wieoft <15Nov2019>.
5. Clairborne Ray, C., “Through the Mill,” The New York Times, 20 December 2010. Available [Online} https://www.nytimes.com/2010/12/21/science/21qna.html <15Nov2019>.
6. Bos, J.H., Das Papierbuch : Handbuch der Papierherstellung, Wolters-Noorhoff Verlag, Houten, The Netherlands, 2006.
7. Stürmer, L., “Über die Eigenschaften von Sekundärfaserstoffen aus Altpapier unter dem Einfluss ihrer Vorgeschichte,” Ph.D. dissertation, Technical Univeristy of Darmstadt, Darmstadt, Germany, 1980.
8. Hunold, M., “Experimentelle und theoretische Untersuchungen über quantitative und qualitative Auswirkungen steigender Altpapier-Einsatzquoten auf das Recyclingsystem Papier-Altpapier,” Ph.D. dissertation, Technical Univeristy of Darmstadt, Darmstadt, 1997.
9. Schabel, S. and Putz, H.-J., Wochenbl. Papierfabr. 133(3/4): 103(2005).
10. Alanko, K., Paulapuro, H., and Stenius, P., Pap. Puu 77(5): 315(1995).
11. Bouchard, J. and Douek, M., J. Pulp Pap. Sci. 20(5): J131(1994).
12. Bovin, A., Hartler, N., and Teder, A., Pap. Technol. Ind. 14(5): 261(1973).
13. Cˇabalová, I., Kacˇík, F., and Kacˇíková, D., “Recycling of paper– changes of mechanical and optical properties,” 11th Internaltional Multidisciplinary Scientific GeoConference, Curran Associates, Red Hook, NY, USA, 2011, p. 867. https://doi.org/10.5593/sgem2011/s21.112.10.5593/sgem2011/s21.112 ↗
14. Cardwell, R. and Alexander, S., Appita 30(4): 327(1977).
15. Chatterjee, A., Kortschot, M., Roy, D.N, et al., Tappi J. 76(7): 109(1993).
16. Guest, D. and Weston, J., “Fibre-water interactions: modified by recycling,” TAPPI Pulping Conf., TAPPI Press, Peachtree Corners, GA, USA, 1986, p. 589.
17. Houen, P., Helle, T., and Johnsen, P., “Effect of recycling of thermomechanical pulp on some pulp and handsheet properties,” 18th International Mechanical Pulping Conference, Oslo, 1993, p. 350.
18. Howarth, P. and Rogers, C., “The effect of re-use on the properties of machine recycled paper,” Int. Pap. Phys. Conf., Proc., TAPPI Press, Peachtree Corners, 1975.
19. Marton, R., Brown, A., Granzow, S., et al., Prog. Pap. Recycl. 3(2): 58(1993).
20. Nazhad, M. and Paszner, L., Prog. Pap. Recycl. 4(2): 22(1994).
21. Reme, P.A. and Helle, T., “The effect of recycling on fibre crosssectional shape. COST Action E1 paper recyclability,” in COST Action E1 Paper Recyclability (A. Blanco, C. Negro, I. Gaspar, et al., Eds.), European Commission, Luxembourg City, Luxembourg, 1998.
22. Van Wyk, W. and Gerischer, G., Pap. Puu 64(9): 526(1982).
23. Howard, R.C. and Bichard, W., J. Pulp Pap. Sci. 18(4): J151(1992). https://doi.org/10.1557/PROC-266-195.10.1557/PROC-266-195 ↗
24. Göttsching, L. and Stürmer, L., Wochenbl. Papierfabr. 106(23/24): 909(1978).
25. Nazhad, M.M., J. Ind. Eng. Chem. 11(3): 314(2005).
26. Koning, J. and Godshall, W., Tappi 58(9): 146(1975).
27. Cabalova, I., Kacik, F., Geffert, A., et al., “The effects of paper recycling and its environmental impact,” in Environmental Management in Practice, InTech, Rijeka, Croatia, 2011. https://doi.org/10.5772/23110.10.5772/23110 ↗
28. Göttsching, L. and Stürmer, L., Wochenbl. Papierfabr. 107(3): 69(1979).
29. Horn, R.A., Pap. Trade J. 159(7/8): 78(1975).
30. Hunold, M. and Göttsching, L., Das Papier 47(10A): V172(1993).
31. Meinl, G. and Tempel, L., “Prediction of paper for recycling quality on a regional level by using fibre flow models,” REFFIBRE Workshop, Papiertechnische Stiftung (PTS), Munich, Germany, 2015.
32. Schug, J., “Konzeption eines Pilotversuches zum Mehrfachrecycling von Wellpappe,” Master’s thesis, Technical University of Darmstadt, Darmstadt, 2017.