Catalysis-a potential alternative to kraft pulping
Source abstract
Abstract
A thorough analysis of the kraft pulping process makes it obvious why it has dominated for over a century as an industrial process with no replacement in sight. It uses low-cost raw materials; collects and regenerates over 90% of the chemicals needed in the process; and is indifferent to wood raw material and good at preserving the cellulose portion of the wood, the part that provides strong fibers. Although the process is odiferous, extremely capital intensive, and very poor at preserving hemicellulose yield, no alternatives have been able to replace it for process cost and product quality. There is a misconception that no new pulping processes have been discovered since the discovery of kraft pulping. Besides the minor adjustments—such as anthraquinone or polysulfide— chlorine, chlorite, and peracetic acid holopulping were discovered and evaluated decades ago. Various solvent pulping methods were discovered and evaluated in the 1980s and 1990s. This work continues with ionic solvents, deep eutectic solvents, and most recently protic ionic liquids. Where all these alternative processes fail is process cost. The chemicals are too expensive and too difficult to recover for use in a commercial process to produce wood pulp. The premise of this review is that the only way to achieve better performance and lower cost than the existing kraft pulping process will be a process using a catalyst to control and direct the reactions. With a high enough reaction rate and a sufficiently high number of turnovers, even an expensive catalyst can still be low cost. We reviewed the literature of existing pulping and delignification catalysts and propose research areas of interest for more intensive experimental efforts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Enzyme-mediated dye degradation · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Clayton, D.W., in Pulp and Paper Manufacture, Vol. I: The Pulping of Wood (R.G. McDonald and J.N. Franklin, Eds.), McGraw-Hill, New York, 1969, pp. 347-438.
2. Leopold, B., Tappi J. 44(3): 230(1961).
3. Holton, H., Pulp Pap. Can. 78: T218(1977).
4. Donnini, G.P., Blain, T.J., Holton, H.H., et al., J. Pulp Pap. Sci. 84(11): TR134(1983).
5. Kondo, R. and McCarthy, J.L., J. Wood Chem. Technol. 5(1): 37(1985)10.1080/02773818508085180 ↗
6. Brogdon, B.N. and Dimmel, D.R., J. Wood Chem. Technol. 16(3): 261(1996)10.1080/02773819608545808 ↗
7. Simard, G.L., Genco, J.M., and Henriksson, K.E., Tappi J. 62(5): 91(1979)
8. Irvine, G.M., Nelson, P.J. aand Gniel, G.M., Appita 40(3): 189)1987).
9. Gierer, J., Lindberg, O. and Noren, I., Holzforschung 33(6): 213(1979).10.1515/hfsg.1979.33.6.213 ↗
10. Landucci, L.L., Tappi J. 63(7): 95(1980)
11. Fleming, B.I., Kubes, G.J., MacLead, J.M., et al., Tappi 62(7): 55(1979).
12. Dimmel, D.R. and Shepard, D., J. Wood Chem. Technol. 2(1): 73(1982).10.1080/02773818208085121 ↗
13. Algar, W.H., Farrington, A., Jessup, B., et al., Appita 33(1): 33(1979).
14. Revenga, J.A., Rodriguez, F., and Tijero, J., J. Pulp Pap. Sci. 21(3): 104(1995).
15. Crestini, C., Crucianelli, M., Orlandi, M., et al., Catal. Today 156(1-2): 8(2010).10.1016/j.cattod.2010.03.057 ↗
16. Hage, R. and Lienke, A., Angew. Chem. Int. Ed. Engl. 45(2): 206(2006).10.1002/anie.200500525 ↗
17. Fullerton, T.J. and Ahern, S.P., Tappi 61(12): 37(1978).
18. Landucci, L.L. and Sanyer, N., Tappi 58(2): 60(1975).
19. Popova, N., Bogolitsyn, K., Kosheleva, A., et al., “The catalytic oxidation of the lignin model compounds,” Int. Symp. Wood Pulping Chem., 12th, Vol. II, Gummerus Kirjapaino Oy, Helsinki, 2003, p. 47.
20. Nahum, L., Ind. Eng. Chem. Prod. Res. Dev. 4(2): 71(1965).10.1021/i360014a003 ↗
21. Son, S. and Toste, F.D., Angew. Chem. Int. Ed. Engl. 49(22): 3791(2010).10.1002/anie.201001293 ↗
22. Hanson, S.K., Wu, R., and Silks, L.A., Angew. Chem. Int. Ed. Engl. 51(14): 3410(2012).10.1002/anie.201107020 ↗
23. Weinstock, I.A., Atalla, R.H., Reiner, R.S., et al., Holzforschung 52(3): 304(1998).10.1515/hfsg.1998.52.3.304 ↗
24. Ericsson, B., Lindgren, B.O., and Theander, O., Sven. Papperstidn. 74(22): 757(1971).
25. McClosky, J.T., Sinkey, J.D., and Thompson, N.S., Tappi 58(2): 56(1975).
26. Lamberts, J.J.M. and Neckers, D.C., Tetrahedron 41(11): 2183(1985).10.1016/S0040-4020(01)96591-3 ↗
27. DeRosa, M.C. and Crutchley, R.J., Coord. Chem. Rev. 233–234: 351(2002).10.1016/S0010-8545(02)00034-6 ↗
28. Watkins, A.R., Chem. Phys. Lett. 29(4): 526(1974).10.1016/0009-2614(74)85083-9 ↗
29. Kuzmin, V.A. and Tatikolov, A.S., Chem. Phys. Lett. 53(3): 606(1978).10.1016/0009-2614(78)80080-3 ↗
30. Drago, R.S. and Corden, B.B., Acc. Chem. Res. 13(10): 353(1980).10.1021/ar50154a003 ↗
31. Nishimi, T., Kamachi, T., Kato, K., et al., Eur. J. Org. Chem. 2011(22): 4113(2011).10.1002/ejoc.201100300 ↗
32. Tasman, J.E. and Berzins, V., Tappi 40(9): 695(1957).
33. Lapierre, C., in Lignin and Lignans (C. Heitner, D.R. Dimmel, and J.A. Schmidt, Eds.), CRC Press, Boca Raton, 2010, Chap. 2.
34. Chang, H.M., and Allan, G.G., in Lignins: Occurrence, Formation, Structure, and Reactions (K.V. Sarkanen and C.H. Ludwig, Eds.), New York, Wiley Interscience, 1971, Chap. 11.
35. Garves, K., Holzforschung 51(6): 526(1997).10.1515/hfsg.1997.51.6.526 ↗
36. Rapson, W.H., Tappi 39(5): 284(1956).
37. Pearl, I.A. and Beyer, D.L., Tappi 33(11): 544(1950).10.1093/jaoac/33.3.544 ↗
38. Pearl, I.A., Beyer, D.L., and Whitney, D., Tappi 44(7): 479(1961).
39. Abrahamsson, K. and Samuelson, O., Sven. Papperstidn. 76(13): 480(1973).
40. Abrahamsson, K. and Samuelson, O., Sven. Papperstidn. 78(4): 135(1975).
41. Perng, Y.S., Oloman, C.W., Watson, P.A., et al., Tappi J. 77(11): 119(1994).
42. Haikarainen, A., “Metal-salen catalysts in the oxidation of lignin model compounds,” academic dissertation, University of Helsinki, Helsinki, Finland, 2005.
43. Kervinen, K., “Studies on veratryl alcohol oxidation catalyzed by Co(salen) type complexes and molecular oxygen in aqueous solution,” academic dissertation, University of Helsinki, Helsinki, Finland, 2005.
44. Korpi, H., “Copper di-imine complexes: structures and catalytic activity in the oxidation of alcohols by dioxygen,” academic dissertation, University of Helsinki, Helsinki, Finland, 2005.
45. Hanson, S.K., Baker, R.T., Gordon, J.C., et al., Inorg. Chem. 49(12): 5611(2010).10.1021/ic100528n ↗
46. Hanson, S.K., Baker, R.T., Gordon, J.C., et al., J. Am. Chem. Soc. 132(50): 17804(2010).10.1021/ja105739k ↗
47. Lahtinen, P., Korpi, H., Haavisto, E., et al., J. Comb. Chem. 6(6): 967(2004).10.1021/cc0499136 ↗
48. Lahtinen, P., Lankinen, E., Leskelä, M., et al., Appl. Catal., A 295(2): 177(2005).10.1016/j.apcata.2005.08.013 ↗
49. Korpi, H., Sippola, V., Filpponen, I., et al., Appl. Catal., A 302(11): 250(2006).10.1016/j.apcata.2006.01.020 ↗
50. Korpi, H., Lahtinen, P., Sippola, V., et al., Appl. Catal., A 268(1-2): 199(2004).10.1016/j.apcata.2004.03.036 ↗
51. Calvin, M., Bailes, R.H., and Wilmarth, W.K., J. Am. Chem. Soc. 68(11): 2254(1946).10.1021/ja01215a041 ↗
52. Crumbliss, A.L. and Basolo, F., J. Am. Chem. Soc. 92(1): 55(1970).10.1021/ja00704a009 ↗
53. Brown, L.D. and Raymond, K.N., Inorg. Chem. 14(11): 2595(1975).10.1021/ic50153a003 ↗
54. Henrici-Olive, G. and Olive, S., Angew. Chem. Int. Ed. Engl. 13(1): 29(1974).10.1002/anie.197400291 ↗
55. Dedieu, A., Rohmer, M.M., and Veillard, A., J. Am. Chem. Soc. 98(19): 5789(1976).10.1021/ja00435a009 ↗
56. Zombeck, A., Drago, R.S., Corden, B.B., et al., J. Am. Chem. Soc. 103(25): 7580(1981).10.1021/ja00415a027 ↗
57. Kervinen, K., Lahtinen, P., Repo, T., et al., Catal. Today 75(1-4): 183(2002).10.1016/S0920-5861(02)00064-0 ↗
58. Kervinen, K., Korpi, H., Mesu, J.G., et al., Eur. J. Inorg. Chem. 2005(13): 2591(2005).10.1002/ejic.200500042 ↗
59. Bozell, J.J., Hames, B.R., and Dimmel, D.R., J. Organ. Chem. 60(8): 2398(1995).10.1021/jo00113a020 ↗
60. Elder, T., Bozell, J.J., and Cedeno, D., Phys. Chem. Chem. Phys. 15: 7328(2013).10.1039/c3cp44404j ↗
61. Berenger, B., Bozell, J.J., and Elder, T., Green Chem. 7(16): 3635(2014).10.1039/C4GC00709C ↗
62. Chiang, L., Allan, L.E.N., Alcantara, J., et al., Dalton Trans. 43(11): 4295(2013).10.1039/C3DT51846A ↗
63. Pu, A., Policar, C., and Mahy, J.-P., Inorg. Chim. Acta 360(6): 2139(2007).10.1016/j.ica.2006.10.040 ↗
64. Kubes, G.J., Fleming, B.I., MacLeod, J.M., et al., Tappi 61(8): 46(1978).
65. Fullerton, T.J. and Wilkins, A.L., J. Wood Chem. Technol. 5(2): 189(1985).10.1080/02773818508085187 ↗
66. Sobolev, I. and Schuerch, C., Tappi 41(10): 545(1958).
67. Snajberk, K. and Zavarin, E., Tappi 53(8): 1507(1970).
68. Pepper, J.M. and Rahman, M.D., Cellul. Chem. Technol. 21(3): 233(1987).10.2307/2214916 ↗
69. Bolker, H.I. and Li, C.M., “Delignification of wood by hydrogenolysis with a soluble catalyst,” Proc., Can. Wood Chem. Symp., Ext. Abstr. Vol. 4, Chemical Institute of Canada/CPPA, Ottawa and Montreal, 1973, p. 39.
70. Schultz, T.P., J. Wood Chem. Technol. 2(1): 33(1982).10.1080/02773818208085118 ↗
71. Hu, T.Q., James, B.R., and Lee, C.-L., J. Pulp Pap. Sci. 23(4): J153(1997).
72. Hu, T.Q., James, B.R., and Lee, C.-L., J. Pulp Pap. Sci. 23(5): J200(1997).
73. Hu, T.Q., James, B.R., and Wang, Y., J. Pulp Pap. Sci. 25(9): 312(1998).
74. Smith, D.A. and Dimmel, D.R., J. Wood Chem. Technol. 14(2): 297(1994).10.1080/02773819408003099 ↗
75. Cotton, F.A. and Wilkinson, G., Advanced Inorganic Chemistry, 3rd edn., John Wiley and Sons, New York, 1972, Chap. 24.
76. Weinstock, I.A., Atalla, R.H., Reiner, R.S., et al., J. Mol. Catal. 116(1-2): 59(1997).10.1016/S1381-1169(96)00074-X ↗
77. Landucci, L.L., Tappi 62(4): 71(1979).