Alternative “green” lime kiln fuels: Part II—Woody biomass, bio-oils, gasification, and hydrogen
Source abstract
Abstract
This paper is the second of a two-part series on “green” lime kiln fuels. The first part of this work reviews the use of pulp mill and recovery byproducts as either full or partial replacement of oil or natural gas in the kiln. The second part reviews the use of various forms of woody biomass, bio-oils, gasification and hydrogen as potential carbon neutral or carbon-free lime kiln fuels. Several of these options require specialized burners to supply the fuel to the kiln and high-quality metallurgy to withstand the acidic conditions of the fuel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermochemical Biomass Conversion Processes · Lignin and Wood Chemistry · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Westerberg, L., Seip, D., and Robinson, L., “Firing of lime sludge kilns with bark and wood waste,” TAPPI Eng. Conf. Proc., 1982.
2. Kuparinen, K. and Vakkilainen, E., BioResources 12(2): 4031(2017). https://doi.org/10.15376/biores.12.2.4031-4048.10.15376/biores.12.2.4031-4048 ↗
3. Azarniouch, M.K. and Philp, R.J., Pulp Pap. Can. 84(1): 29(1983).
4. Philip, R.J. and Azarniouch, M.K., “Wood residues as fuel source for lime kilns,” 4th Bioenergy R&D Semin., Proc., PAPRICAN, Montreal, 1982.
5. Philp, R.J. and Azarniouch, M.K., Pulp Pap. Can. 85(12): 114(1984).10.1080/00905998408407987 ↗
6. Azarniouch, M.K., Pulp Pap. Can. 87(6): 112(1986).10.1108/eb038686 ↗
7. Karjaluoto, J., “Pyroflow-gasifying for a lime kiln in operation,” Int. Chem. Recovery Conf., TAPPI Press, Peachtree Corners, GA, USA, 1985, Book 3.
8. Mackie, D., Meade, D., Vandergriendt, R., et al., “Gasification of bark—a new opportunity to reduce fossil fuel in power boilers and lime kilns,” TAPPI PEERS Conf., TAPPI Press, Peachtree Corners, 2008.
9. Ikonen, O., “Alternative liquid biofuels for lime kilns,” Bachelor’s thesis, Lappeenranta University of Technology, Lappeenranta, Finland, 2012.
10. Abson, D. and Holman, K.L., “Alternate fuels for lime kilns—effects of fuel ash on lime and liquor quality,” Int. Chem. Recovery Conf., TAPPI Press, Peachtree Corners, 1985, Book 3.
11. Francey, S., “Impacts of burning alternative fuels in lime kilns at kraft pulp mills,” Master’s thesis, University of Toronto, Toronto, ON, Canada, 2009.
12. Medic, D., Darr, M., Shah, A., et al., Energies 5(4): 1199(2012). https://doi.org/10.3390/en5041199.10.3390/en5041199 ↗
13. Van der Stelt, M.J.C., Gerhauser, H., Kiel, J.H.A., et al., Biomass Bioenergy 35(9): 3748(2011). https://doi.org/10.1016/j.biombioe.2011.06.023.10.1016/j.biombioe.2011.06.023 ↗
14. Prins, M.J., Ptasinski, K.J., and Janssen, F.J.J.G., Energy 31(15): 3458(2006). https://doi.org/10.1016/j.energy.2006.03.008.10.1016/j.energy.2006.03.008 ↗
15. Hamaguchi, M., Cardoso, M., and Vakkilainen, E., Energies 5(7): 2288(2012). https://doi.org/10.3390/en5072288.10.3390/en5072288 ↗
16. Kleinschmidt, C., “Overview of international developments in tor-refaction,” Proc. IEA Bioenergy Task 40: Sustainable Bioenergy Trade Workshop, International Energy Agency, Paris, 2011.
17. Gorag, J.P., Leary, W.R., Wang, D., et al., “Computer modeling as a tool to estimate the impact of fuel type on the performance of kilns used to regenerate lime in the kraft process,” TAPPI PEERS Conf., TAPPI Press, Peachtree Corners, 2014.10.32964/tj14.7.461 ↗
18. Isaksson, J., “Biomass gasification for lime kiln applications,” 7th Colloquium on Black Liquor Combustion and Gasification, University of Jyväskylä, Jyväskylä, Finland, 2006.
19. Anon., “Gasification helps mill go fossil fuel free,” Andritz, Graz, Austria, 2016. Available [Online] https://issuu.com/adhoccom/docs/power_mfjoutseno_finland/1?e=1592876/42329696 <21May2020>.
20. Anon., “Valmet technology plays key role at Metsä’s new Äänekoski bioproduct mill,” TAPPI Over the Wire, TAPPI Press, Peachtree Corners, 2017. Available [Online] http://www.naylornetwork.com/ppi-otw/articles/index-v2.asp?aid=458911&issueID=50701 <20May2020>.
21. Isaksson, J., “Replacing lime kiln fuel oil with gasified biomass,” Forum on Energy: Immediate Solutions, Emerging Technologies, TAPPI Press, Peachtree Corners, 2006.
22. Francey, S., Tran, H., and Jones, A., TAPPI J. 8(10): 33(2009).10.32964/TJ8.10.33 ↗
23. Nieminen, J. and Lyytinen, H., Pulp Pap. 60(9): 151(1986).
24. Ciferno, J.P. and Marano, J.J., “Benchmarking biomass gasification technologies for fuels, chemicals and hydrogen production,” U.S. Department of Energy, National Energy Technology Laboratory, June 2002.
25. Nelson, S.G., Reid, R.W., and Wire, G.G., “Coal gasification in the South African pulp and paper industry,” Annu. Meet. Proc. - Tech. Assoc. Pulp Pap. Ind., TAPPI Press, Peachtree Corners, 1982.
26. He, Q.S., McNut, J., and Yang, J., Renewable Sustainable Energy Rev. 71: 63(2017). https://doi.org/10.1016/j.rser.2016.12.110.10.1016/j.rser.2016.12.110 ↗
27. Hinchee, M., Rottmann, W., Mullinax, L., et al., In Vitro Cell. Dev. Biol.: Plant 45(6): 619(2009). https://doi.org/10.1007/s11627-009-9235-5.10.1007/s11627-009-9235-5 ↗
28. Carpenter, D.L., Bain, R.L., Davis, R.E., et al., Ind. Eng. Chem. Res. 49(4): 1859(2010). https://doi.org/10.1021/ie900595m.10.1021/ie900595m ↗
29. Jablonski, W., Gaston, K.R., Nimlos, M.R., et al., Ind. Eng. Chem. Res. 48(23): 10691(2009). https://doi.org/10.1021/ie900596v.10.1021/ie900596v ↗
30. Francey, S., Tran, H., and Berglin, N., TAPPI J. 10(8): 19(2011). https://doi.org/10.32964/TJ10.8.19.10.32964/TJ10.8.19 ↗
31. Saviharju, K. and Timonen, T., Bioresour. Technol. 46(1-2): 159(1993). https://doi.org/10.1016/0960-8524(93)90068-M.10.1016/0960-8524(93)90068-M ↗
32. Begum, S., Kumaran P., and Jayakumar M., IOP Conf. Ser.: Earth Environ. Sci. 16: 012026(2013). https://doi.org/10.1088/1755-1315/16/1/012026.10.1088/1755-1315/16/1/012026 ↗
33. Johnson, D.T. and Taconi, K.A., Environ. Prog. Sustainable Energy 26(4): 338(2007). https://doi.org/10.1002/ep.10225.10.1002/ep.10225 ↗
34. He, Q.S., McNut, J., Yang, J., Renewable Sustainable Energy Rev. 71: 63(2017). https://doi.org/10.1016/j.rser.2016.12.110.10.1016/j.rser.2016.12.110 ↗
35. Steinmetz, S., Herrington, J.S., Winterrowd, C.K., et al., Proc. Combust. Inst. 34(2): 2749(2013). https://doi.org/10.1016/j.proci.2012.07.050.10.1016/j.proci.2012.07.050 ↗
36. Diebold, J.P., “A review of the chemical and physical mecha-nisms of the storage stability of fast pyrolysis bio-oils,” NREL Subcontractor Report NREL/SR-570-2761, National Renewable Energy Laboratory, Golden, CO, USA, 2000. https://doi.org/10.2172/753818.10.2172/910497 ↗
37. Kuparinen, K., Vakkilainen, E., and Kärki, J., “Electrolysis and biomass conversion as options to produce renewable alternatives for fossil lime kiln fuels,” TAPPI PEERS Conf., TAPPI Press, Peachtree Corners, 2016.10.15376/biores.12.2.4031-4048 ↗
38. Lehner, M., Tichler, R., Steinmüller, H., et al., Power-to-Gas: Technology and Business Models, Springer, Berlin, 2014. https://doi.org/10.1007/978-3-319-03995-4.10.1007/978-3-319-03995-4 ↗
39. Saarela, S., Garcia, E., Eluen, I., et al., “The first year of operation of the Botnia Fray Bentos pulp mill in Uruguay,” ABTCP Press, Sao Paulo, 2008.
40. Manning, H. and Tran, H., “Impact of co-firing bio-fuels and fossil fuels on lime kiln operation,” Int. Chem. Recovery Conf., TAPPI Press, Peachtree Corners, 2014.10.32964/tj14.7.474 ↗
41. Cardoso, M., Hamaguchi, M., and Vakkilainen, E., “Energy produc-ing possibilities and new products – presentation summary,” LUT Energy Research Report, Lappeenranta University of Technology, Lappeenranta, Finland, 2011.