Composites from a forest biorefinery byproduct and agrofibers: Lignosulfonate-phenolic type matrices reinforced with sisal fibers
Source abstract
Abstract
The replacement of phenol with sodium lignosulfonate and formaldehyde with glutaraldehyde in the preparation of resins resulted in a new resol-type phenolic resin, sodium lignosulfonate-glutaraldehyde resin, in addition to sodium lignosulfonate-formaldehyde and phenol-formaldehyde resins. These resins were then used to prepare thermosets and composites reinforced with sisal fibers. Different techniques were used to characterize raw materials and/or thermosets and composites, including inverse gas chromatography, thermogravimetric analysis, and mechanical impact and flexural tests. The substitution of phenol by sodium lignosulfonate in the formulation of the composite matrices increased the impact strength of the respective composites from approximately 400 Jm-1 to 800 J m-1 and 1000 J m-1, showing a considerable enhancement from the replacement of phenol with sodium lignosulfonate. The wettability of the sisal fibers increased when the resins were prepared from sodium lignosulfonate, generating composites in which the adhesion at the fiber-matrix interface was stronger and favored the transference of load from the matrix to the fiber during impact. Results suggested that the composites experienced a different mechanism of load transfer from the matrix to the fiber when a bending load was applied, compared to that experienced during impact. The thermogravimetric analysis results demonstrated that the thermal stability of the composites was not affected by the use of sodium lignosulfonate as a phenolic-type reagent during the preparation of the matrices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Toledano, A., Serrano, L., and Labidi, J., Ind. Eng. Chem. Res. 50(11): 6573(2011).10.1021/ie102142f ↗
2. Yoon, S., Macewan, K., and Heiningen, A.V., TAPPI J. 7(6): 27(2008).10.32964/TJ7.6.27 ↗
3. Kadam, K.L., Chin, C.Y., and Brown, L.W., J. Ind. Microbiol. Biotechnol. 35(5): 331(2008).10.1007/s10295-008-0322-0 ↗
4. Hämäläinen, S., Näyhä, A., and Pesonen, H., J. Clean. Prod. 19(16): 1884(2011).10.1016/j.jclepro.2011.01.011 ↗
5. Kangas, H., Lintunen, J., Pohjola, J., et al., Energy Econ. 33(6): 1165(2011).10.1016/j.eneco.2011.04.008 ↗
6. Sarkar, N., Ghosh, S.K., Bannerjee, S., et al., Renewable Energy 37(1): 19(2012).10.1016/j.renene.2011.06.045 ↗
7. White, D.E., Courchene, C., Mcdonough, T., et al. TAPPI J. 10(2): 36(2011).10.32964/TJ10.2.36 ↗
8. Lacerda, T.M., de Paula, M.P., Zambon, M., et al., Cellulose 19(2): 351(2012).10.1007/s10570-011-9638-4 ↗
9. McCarthy, J.L. and Islam, A. in Lignin: Historical, Biological, and Materials Perspectives (W.G. Glasser, R.A. Northey, and T.P. Shultz, Eds.), Oxford University Press, Washington, DC, 2000.
10. Thielemans, W., Can, E., Morye, S.S., et al., J. Appl. Polym. Sci. 83(2): 323(2002).10.1002/app.2247 ↗
11. Paiva, J.M.F. and Frollini, E., Macromol. Mater. Eng. 291(4): 405(2006).10.1002/mame.200500334 ↗
12. Hoareau, W., Oliveira, F.B., Grelier, S., et al., Macromol. Mater. Eng. 291(7): 829(2006).10.1002/mame.200600004 ↗
13. Ramires, E.C., Megiatto Jr., J.D., Gardrat, C., et al., Biotechnol. Bioeng. 107(4): 612(2010).10.1002/bit.22847 ↗
14. Ramires, E.C., Megiatto Jr., J.D., Gardrat, C., et al., Bioresour. Technol. 101(6): 1998(2010).10.1016/j.biortech.2009.10.005 ↗
15. Ismail, T.N.M.T., Hassan, H.A., Hirose, S., et al., Polym. Int. 59(2): 181(2010).10.1002/pi.2705 ↗
16. Frollini, E. and Castellan, A. in Encyclopedia of Composites 2nd edn., John Wiley & Sons, Hoboken, NJ, 2012, pp. 2059–2068.
17. Cerrutti, B.M., de Souza, C.S., Castellan, A., et al., Ind. Crops Prod. 36(1): 108(2012).10.1016/j.indcrop.2011.08.015 ↗
18. Mulder, W.J., Gosselink R.J.A., Vingerhoeds, M.H., et al., Ind. Crops Prod. 34(1): 915(2011).10.1016/j.indcrop.2011.02.011 ↗
19. Vishtal, A. and Kraslawski, A., BioResources 6(3): 3547(2011).10.15376/biores.6.1.791-806 ↗
20. Cherubini, F. and Strømman, A.H., Biofuels, Bioprod. Biorefin. 5(5): 548(2011).10.1002/bbb.297 ↗
21. Qiu, X., Kong, Q., Zhou, M., et al., J. Phys. Chem. B. 114(48): 15857(2010).10.1021/jp107036m ↗
22. Zhu, J.Y., Luo, X., Tian, S., et al., TAPPI J. 10(5): 9(2011).10.32964/TJ10.5.9 ↗
23. Simionescu, C.I., Macoveanu, M.M., Vasile, C., et al., Cell. Chem. Technol. 30(5–6): 411(1996).
24. Kovrizhnykh, L.P. and Leonovich, A.A., Russ. J. Appl. Chem. 71(3): 510(1998).
25. Megiatto Jr., J.D., Oliveira, F.B., Rosa, D.S., et al., Macromol. Biosci. 7(9-10): 1121(2007).10.1002/mabi.200700083 ↗
26. Megiatto Jr., J.D., Silva, C.G., Rosa, D.S., et al., Polym. Degrad. Stab. 93(6): 1109(2008).10.1016/j.polymdegradstab.2008.03.011 ↗
27. Cordeiro, N., Gouveia, C., John, M.J., Ind. Crops Prod. 33(1): 108(2011).10.1016/j.indcrop.2010.09.008 ↗
28. Mills, R.H., Gardner, D.J., and Wimmer, R., J. Appl. Polym. Sci. 110(6): 3880(2008).10.1002/app.28956 ↗
29. Megiatto Jr., J.D., Silva, C.G., Ramires, E.C., et al., Polym. Test. 28(8): 793(2009).10.1016/j.polymertesting.2009.07.001 ↗
30. Razera, I.A.T. and Frollini, E., J. Appl. Polym. Sci. 91(2): 1077(2004).10.1002/app.13224 ↗
31. Buschle-Diller, G. and Zeronian, S.H., J. Appl. Polym. Sci. 45(6): 967(1992).10.1002/app.1992.070450604 ↗
32. Belgacem, M.N., Czeremuszkin, G., Sapieha, S., et al., Cellulose 2(3): 145(1995).10.1007/BF00813015 ↗
33. Belgacem, M.N. and Gandini, A. in Interfacial Phenomena in Chromatography, Marcel Dekker, New York, 1999, p. 41.
34. Gutierrez, M.C., Rubio, J., Rubio, F., et al. J. Chromatogr., A. 845(1–2): 53(1999).10.1016/S0021-9673(99)00021-7 ↗
35. Silva, C.G., Beneducci, D., and Frollini, E., BioResources 7(1): 78(2011).10.15376/biores.7.1.78-98 ↗
36. Fengel, D., and Wegener, G., Wood: Chemistry, Ultrastructure, Reactions, Walter de Gruyter, New York, 1989.
37. Bledzki, A.K. and Gassan, J., Prog. Polym. Sci. 24(2): 221(1999).10.1016/S0079-6700(98)00018-5 ↗
38. Onésippe, C., Passe-Coutrin, N., Toro, F., et al., Composites: Part A. 41(4): 549(2010).10.1016/j.compositesa.2010.01.002 ↗
39. Martin, A.R., Martins, M.A., da Silva, O.R.R.F., et al., Thermochim. Acta. 506(1–2): 14(2010).10.1016/j.tca.2010.04.008 ↗
40. Trindade, W.G., Hoareau, W., Megiatto, J.D., et al., Biomacromolecules 6(5): 2485(2005).10.1021/bm058006+ ↗
41. Ass, B.A.P., Belgacem, M.N., and Frollini, E., Carbohydr. Polym. 63(1): 19(2006).10.1016/j.carbpol.2005.06.010 ↗
42. Willson, P. in Composites in Fire 3, Centre for Composite Materials Engineering, University of Newcastle, UK, 2003.
43. Taylor, J.G. in Phenolic Resins: A Century of Progress (L. Pilato, Ed.), Springer, New York, 2010, p. 263.10.1007/978-3-642-04714-5_12 ↗
44. Órfão, J.J.M., Antunes, F.J.A., and Figueiredo, J.L., Fuel 78(2): 349(1999).10.1016/S0016-2361(98)00156-2 ↗
45. Jakab, E., Faix, O., Till, F., et al., Holzforschung 45(5): 355(1991).10.1515/hfsg.1991.45.5.355 ↗
46. Conner, A.H. and Lorenz, L.F., J. Wood Chem. Technol. 6(4): 59(1986)10.1080/02773818608085246 ↗
47. Haupt, R., and Gomez-Bueso, J. in Phenolic Resins: A Century of Progress (L. Pilato, Ed.), New York, Springer, 2010, p. 175.
48. Paiva, J.M.F. and Frollini, E., J. Appl. Polym. Sci. 83: 880(2002).10.1002/app.10085 ↗
49. Lo, M., Panthapulakkal, S., and Sain, M., Auto. Composites Conf. Exhib. Proc., Troy, MI, Society of Plastics Engineers, 2009, p. 1.