Facile preparation of nanofiller-paper using mixed office paper without deinking
Source abstract
Abstract
Mixed office paper (MOP) pulp without deinking with an ash content of 18.1 ± 1.5% was used as raw material to produce nanofiller-paper. The MOP pulp with filler was mechanically fibrillated using a laboratory stone grinder. Scanning electron microscope imaging revealed that the ground filler particles were wrapped by cellulose nanofibrils (CNFs), which substantially improved the incorporation of filler into the CNF matrix. Sheets made of this CNF matrix were densified due to improved bonding. Specific tensile strength and modulus of the nanofiller-paper with 60-min grinding reached 48.4 kN·m/kg and 8.1 MN·m/kg, respectively, approximately 250% and 200% of the respective values of the paper made of unground MOP pulp. Mechanical grinding duration did not affect the thermal stability of the nanofiller-paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Moon, R.J., Martini, A., Nairn, J., et al., Chem. Soc. Rev. 40(7): 3941(2011).10.1039/c0cs00108b ↗
2. Klemm, D., Kramer, F., Moritz, S., et al., Angew. Chem., Int. Ed. 50(24): 5438(2011).10.1002/anie.201001273 ↗
3. Isogai, A., J. Wood Sci. 59(6): 449(2013).10.1007/s10086-013-1365-z ↗
4. Siró, I. and Plackett, D., Cellulose 17(3): 459(2010).10.1007/s10570-010-9405-y ↗
5. Xu, X., Liu, F., Jiang, L., et al., ACS Appl. Mater. Interfaces 5(8): 2999(2013).10.1021/am302624t ↗
6. Xu, X., Wang, H., Jiang, L., et al., Macromolecules 47(10): 3409(2014).10.1021/ma402627j ↗
7. Yang, Q., Fukuzumi, H., Saito, T., et al., Biomacromolecules 12(7): 2766(2011).10.1021/bm200766v ↗
8. Olsson, R., Samir, M.A.S.A., Salazar-Alvarez, G., et al., Nat. Nanotechnol. 5(8): 584(2010).10.1038/nnano.2010.155 ↗
9. Salajkova, M., Valentini, L., Zhou, Q., et al., Compos. Sci. Technol. 87(18): 103(2013).10.1016/j.compscitech.2013.06.014 ↗
10. Saito, T., Oaki, Y., Nishimura, T., et al., Mater. Horiz. 1: 321(2014).10.1039/c3mh00134b ↗
11. Jin, H., Kettunen, M., Laiho, A., et al., Langmuir 27(5): 1930(2011).10.1021/la103877r ↗
12. Swain, S.K., Dash, S., Kisku, S.K., et al., J. Mater. Sci. Technol. 30(8): 791(2014)10.1016/j.jmst.2013.12.017 ↗
13. Wu, C.N., Saito, T., Fujisawa, S., et al., Biomacromolecules 16(3): 1927(2012).10.1021/bm300465d ↗
14. Delhom, C.D., White-Ghoorahoo, L.A., and Pang, S.S., Composites, Part B 41(6): 475(2010).10.1016/j.compositesb.2009.10.007 ↗
15. Torvinen, K., Sievänen, J., Hjelt, T., et al., Cellulose 19(3): 821(2012).10.1007/s10570-012-9677-5 ↗
16. Penttilä, A., Sievänen, J., Torvinen, K., et al., Cellulose 20(3): 1413(2013).10.1007/s10570-013-9883-9 ↗
17. Liu, A., Walther, A., Ikkala, O., et al., Biomacromolecules 12(3): 633(2011).10.1021/bm101296z ↗
18. Gebauer, D., Oliynyk, V., Salajkova, M., et al., Nanoscale 3(9): 3563(2011).10.1039/c1nr10681c ↗
19. Zhao, R., Torley, P., and Halley, P.J., J. Mater. Sci. 43(9): 3058(2008).10.1007/s10853-007-2434-8 ↗
20. American Forest and Paper Association, “Statistics: Paper and Paperboard Recovery,” AF&PA, Washington, D.C., 2012. Available [Online] http://www.paperrecycles.org/statistics/paper-paperboard-recovery <11March2015>.
21. Zhu, J.Y., Tan, F., Scallon, K.L., et al., Sep. Purif. Technol. 43(1): 33(2005).10.1016/j.seppur.2004.09.011 ↗
22. Sluiter, A., Hames, B., Ruiz, R., et al. “Determination of ash in biomass,” NREL/TP-510-4262, National Renewable Energy Laboratory, Washington, D.C. Available [Online] http://www.nrel.gov/biomass/pdfs/42622.pdf<11March2015>.10.2172/891596 ↗
23. Wang, Q.Q., Zhu, J.Y., Gleisner, R., et al., Cellulose 19(5): 1631(2012).10.1007/s10570-012-9745-x ↗
24. Kerekes, R.J., “Characterizing refining actions: linking the process to refining results,” Pira International Refining Conf., Smithers Pira, Leatherhead, UK, 2005.
25. Viesturs, U., Leite, M., Eisimonte, M., et al., Bioresour. Technol. 67(3): 255(1999).10.1016/S0960-8524(98)00119-9 ↗
26. Gabr, M.H., Phong, N.T., Abdelkareem, M.A., et al., Cellulose 20(2): 819(2013).10.1007/s10570-013-9876-8 ↗
27. Wang, W., Chen, X., Donohoe, B.S., et al., Biotechnol. Biofuels 7(57): (2014). Available [Online] http://www.biotechnologyforbiofuels.com/content/7/1/57 <11March2015>.
28. Kilzer, F.J. and Broido, A., Pyrodynamics 2(2-3): 151(1965).
29. Shafizadeh, F. and Bradbury, A.G.W., J. Appl. Polym. Sci. 23(5): 1431(1979).10.1002/app.1979.070230513 ↗
30. Shen, D.K. and Gu, S., Bioresour. Technol. 100(24): 6496(2009).10.1016/j.biortech.2009.06.095 ↗
31. Ingraham, T.R. and Marier, P., Can. J. Chem. Eng. 41(4): 170(1963).10.1002/cjce.5450410408 ↗