Peculiarities of cellulose nanoparticles
Source abstract
Abstract
The effects of sulfuric acid concentration and temperature have been studied to optimize the preparation of crystalline nanoparticles (CNP) and amorphous nanoparticles (ANP) of cellulose. To isolate CNP with increased yield (67%-70%) requires hydrolysis with warm 58-60 wt% sulfuric acid. CNP having average sizes of 150 × 15 nm and heightened yield can be obtained by using optimal hydrolysis conditions together with vigorous disintegration. Because of its highly crystalline structure, CNP have increased specific gravity and low hydrophility and accessibility. CNP potentially can be used as a nano-filler to improve properties of pastes, glues, paints, and coating compositions. To isolate ANP having an average diameter of 100 nm with the optimal yield (65-67%), cold 65-66 wt% sulfuric acid should be used in combination with vigorous disintegration. Because of their amorphous structure, ANP acquire such specific features as increased content of functional groups, high accessibility, enhanced sorption ability and hydrophility, and high viscosity and thickening ability. Given the specific features of ANP, their main application area might be for immobilization of biological active substances and drugs, filling and thickening of cosmetic and medicine remedies (e.g., pastes, creams, sprays, etc.).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Dyeing and Modifying Textile Fibers · Enzyme-mediated dye degradation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Lahiji, R., Xu, X., Reifenberger, R., et al., Langmuir 26(6): 4480(2010).10.1021/la903111j ↗
2. Habibi, Y., Lucia, L., and Rojas, O., Chem. Rev. 110(6): 3479(2010).10.1021/cr900339w ↗
3. Ioelovich, M. and Leykin, A., “Nano-cellulose and its application,” SITA 6: 17(2004).
4. Klemm, D., Schumann, D., Kramer, F., et al., Macromol. Symp. 280: 60(2009).10.1002/masy.200950608 ↗
5. Klemm, D., Heublein, B., Fink, H-P., et al., Angew. Chem. 44: 2(2005).10.1002/anie.200460587 ↗
6. Klemm, D., Schumann, D., Kramer, F., et al., Adv. Polym. Sci. 205: 49(2006).10.1007/12_097 ↗
7. Ioelovich, M., Bioresources 3(4): 1403(2008).10.15376/biores.3.4.Ioelovich ↗
8. Herrick, F., Casebier, R., Hamilton, J., et al., J. Appl. Polym. Sci.: Appl. Polym. Symp. 37: 797(1983).
9. Turbak, A., Snyder, F., and Sandberg, K., J. Appl. Polym. Sci.: Appl Polym Symp. 37: 815(1983).
10. Henriksson, M., Henriksson, G., Berglund, L., et al., Eur. Polym. J. 43(8): 3434(2007).10.1016/j.eurpolymj.2007.05.038 ↗
11. Siro, I. and Plackett, D., Cellulose 17(3): 459(2010).10.1007/s10570-010-9405-y ↗
12. Hubbe, M., Rojas, O., Lucia, L., et al., BioResources 3(3): 929(2008).10.15376/biores.3.2.295-296 ↗
13. Eichhorn, S., Dufresne, A., and Aranguren, M., et al., J. Mater. Sci. 45: 1(2010).10.1007/s10853-009-3874-0 ↗
14. Rånby, B.G., Tappi 35: 53(1952).10.1051/mattech/195235020053 ↗
15. Favier, V., Chanzy, H., and Cavaille, J., Macromolecules 28(18): 6365(1995).10.1021/ma00122a053 ↗
16. Moran, J., Alvarez, V., Cyras, V., et al., Cellulose 15(1): 149(2008).10.1007/s10570-007-9145-9 ↗
17. Lima, M. and Borsali, R., Macromol. Rapid Commun. 25: 771(2004).10.1002/marc.200300268 ↗
18. Bai, W., Holbery, J., and Li, K., Cellulose 16(3): 455(2009).10.1007/s10570-009-9277-1 ↗
19. Luduena, L., Fasce, D., Alvarez, V., et al., BioResources 6(2): 1440(2011).10.15376/biores.6.2.1440-1453 ↗
20. Yu, M., Yang, R., Huang, L., et al., BioResources 7(2): 1802(2012).10.15376/biores.7.2.1802-1812 ↗
21. Yang, L. and Ragauskas, A., Adv. Diverse Ind. Appl. Nanocompos. 3: 17(2011).
22. Bondeson, D., Mathew, A., and Oksman, K., Cellulose 13(2): 171(2006).10.1007/s10570-006-9061-4 ↗
23. Ono, H., Matsui, T., and Miyamoto, I., U.S. pat. 6541627 (2003).
24. Engelhardt, J., Fischer, S., Hettrich, K., et al., U.S. pat. appl. 20110293732 (2011).
25. Li, X., Ding, E., and Li, G., Chin. J. Polym. Sci. 19(3): 291(2001).
26. Zhang, J., Elder, T., Pu, Y., et al., Carbohydr. Polym. 69(3): 607(2007).10.1016/j.carbpol.2007.01.019 ↗
27. Ioelovich, M., Nanosci. Nanotechnol. 2(2): 9(2012).10.5402/2012/428974 ↗
28. Ioelovich, M., Am. J. Nanosci. Nanotechnol. 1(1): 41(2013).10.11648/j.nano.20130101.18 ↗
29. Ioelovich, M., Leykin, A., and Figovsky, O., BioResources 5(3): 1393(2010).10.15376/biores.5.3.1393-1407 ↗
30. Ioelovich, M. and Leykin, A., Cellul. Chem. Technol. 40(5): 313(2006).
31. Ioelovich, M. and Leykin, A., BioResources 6(1): 178(2011).10.15376/biores.6.1.178-195 ↗
32. Ioelovich, M. and Leykin, A., Cellul. Chem. Technol. 40(9): 699(2006).
33. Ioelovich, M., “Study of cellulose interaction with concentrated solutions of sulfuric acid,” ISRN Chem. Eng., 2012. Available [Online] http://www.hindawi.com/journals/isrn/2012/428974/ref.10.5402/2012/428974 ↗
34. Camacho, F., Gonzalez-Tello, P., Jurado, E., et al., J. Chem. Technol. Biotechnol. 67(4): 350(1996).10.1002/(SICI)1097-4660(199612)67:4<350::AID-JCTB564>3.0.CO;2-9 ↗
35. Said, M., Samir, A., Alloin, F., et al., Macromolecules 37(11): 4313(2004).10.1021/ma035939u ↗
36. Ioelovich, M., Wood Chemistry 4: 27(1991).
37. Wu, X., Wagner, R., Raman, A., et al., “Elastic deformation mechanics of cellulose nanocrystals,” TMS 2: 689(2010).
38. Pakzad, A., Simonsen, J., Heiden, P., et al., J. Mater. Res. 27(3): 528(2012).10.1557/jmr.2011.288 ↗
39. Ioelovich, M., “Structure and mechanical properties of cellulose nanocrystallites,” SITA 14: 91(2012).
40. Siqueira, G., Bras, J., and Dufresne, A., Polymer 2(4): 728(2010).10.3390/polym2040728 ↗
41. Dufresne, A., Nanocellulose from Nature to High Perforation Tailored Material, Walter De Gruyter, Berlin, Germany, 2012.10.1515/9783110254600 ↗
42. Ioelovich, M., “Green nano-protective coating,” SITA 15: 63(2013).