Pre-extraction of hemicelluloses and subsequent kraft pulping Part II: Acid- and autohydrolysis
Source abstract
Abstract
Aspen wood chip samples were subjected to hot water treatments (autohydrolysis) with and without sulfuric acid to extract hemicelluloses. A liquor-to-wood ratio of 4:1 was used at temperatures from 130° to 210°C and H2SO4 concentrations in the range from 0% to 1% (w/v), with treatment times up to 4.5 h. Researchers analyzed wood residues and their corresponding hydrolysates, and determined the most suitable conditions for the extraction. Additional information on the suitability of wood residues for pulping purposes is also considered.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Biofuel production and bioconversion · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Wafa Al-Dajani, W., and Tschirner, U.,TAPPI J. 7(6): 3-8 (2008).10.32964/TJ7.6.3 ↗
2. Garrote, G., Dominiguez, H., and Parajo, J. C., J. Chem. Technol. Biotechnol. 74(11): 1101-1109 (1999).10.1002/(SICI)1097-4660(199911)74:11<1101::AID-JCTB146>3.0.CO;2-M ↗
3. Larsson, S., Palmqvist, E., Hahn-Hägerdal, B., Tengborg, C., Stenberg, K., Zacchi, G., and Nilvebrant, N. O., Enzyme Microb. Technol. 24: 151-159 (1999).10.1016/s0141-0229(98)00101-x ↗
4. Palmqvist, E., and Hahn-Hägerdal, B., Bioresource Technology 74: 25-33 (2000).10.1016/S0960-8524(99)00161-3 ↗
5. Olsson, L., and Hahn-Hägerdal, B., Enzyme Microb. Technol. 18: 312-331 (1996).10.1016/0141-0229(95)00157-3 ↗
6. Timell, T. E., Wood Sci Technol. 1: 45-70 (1967).10.1007/BF00592255 ↗
7. Abatzoglou N., Chornet E., Belkacemi K. and Overend R.P., Chem. Eng. Sci. 47: 1109-1122 (1992).10.1016/0009-2509(92)80235-5 ↗
8. Heitz M., Carrasco F., Rubio M., Chauvette G., Chornet E., Julian L. and Overend, R.P., Can. J. Chem. Eng. 64: 647-650 (1986).10.1002/cjce.5450640416 ↗
9. Biermann C.J., Schultz T.P. and McGinnis G.D., J. Wood Chem. Technol. 4: 111-128 (1984).10.1080/02773818408062286 ↗
10. Heitz M., Capek-Ménard E., Koeberle P.G., Gagné J., Chornet E., Overend, R.P., Taylor J.D. and Yu E., Bioresources Technol. 35: 23-32 (1991).10.1016/0960-8524(91)90078-x ↗
11. Lora J.H. and Wayman M., Tappi J. 61: 47-50 (1978).
12. Burstcher E., Bobleter O., Schwald W., Concin R. and Binder, H., J. Chrom. 390: 401-412 (1987).10.1016/S0021-9673(01)94391-2 ↗
13. Aoyama M., Seki K. and Saito N., Holzforschung. 49: 193-196 (1995).10.1515/hfsg.1995.49.3.193 ↗
14. Lee T.H., Kim M.Y., Ryu Y.W. and Seo J.H., J. Microbiol. Biotechnol. 11: 384-388 (2001).
15. Molin, U., and Teder, A., Nordic Pulp Paper Res. J. 17(1), 14-19, 28 (2002).10.3183/npprj-2002-17-01-p014-019 ↗
16. Moss, P. A., and Pere, J., Nordic Pulp Paper Res. J. 21(1), 8-12 (2006).10.3183/npprj-2006-21-01-p008-012 ↗