Solvent-Assisted Filling of Liquid Metal and Its Selective Dewetting for the Multilayered 3D Interconnect in Stretchable Electronics

As stretchable electronics are rapidly developing and becoming complex, the requirement for stretchable, multilayered, and large-area printed circuit boards (PCBs) is emerging. This demands a stretchable electrode and its vertical interconnect access (via) for 3-dimensional (3D) connectivity between layers. Here, we demonstrate solvent-assisted liquid metal (LM) filling into the submicrometer channel (∼400 nm), including via-hole filling and selective dewetting of LM. We provide the theoretical background of solvent-assisted LM filling and selective dewetting and reveal the osmotic pressure arising from anomalous mass transport phenomena, case II diffusion, which drives negative pressure, the spontaneous pulling of LM into the open channel. Also, we suggest design criteria for the geometry and dimension of LM interconnects to obtain structural stability without dewetting, based on the theoretical and computational background. We demonstrate a simple stretchable near-field communication (NFC) device including transferred micrometer-size light-emitting diodes (LEDs) with only 230 μm to the stretchable liquid metal PCB, without any soldering process. The device operates stably under repetitive stretching and releasing (∼50% uniaxial strain) due to the stable connection through the LM via between the upper and lower layers. Finally, we propose a concept for modular-type stretchable electronics, based on the cohesive liquid nature of LM. As a building block, the functional module can be easily removed from a mainframe, and replaced by another functional module, to suit user demand.