Effect of MWCNTs surface functionalization group nature on the thermoelectric power factor of PPy/MWCNTs nanocomposites
Source abstract
Abstract
This work aims to put forward the role of multiwalled carbon nanotubes (MWCNTs) surface functionalization on the enhancement of thermoelectric (TE) power factor of new nanocomposite-based polypyrrole/surface modified multiwalled carbon nanotubes (PPy/MWCNTs), prepared by a facile in-situ oxidative polymerization process. In fact, MWCNTs’ content was fixed to ∼11 wt%, and their surfaces were respectively modified with different functional groups (benzoic acid (-D1), benzene tricarboxylic acid (-D3), -O, -COOH, -NH2 and -SH). After running all the required, spectral, structural, morphological, and thermoelectrical characterizations, it is revealed that the nanocomposites-based functionalized MWCNTs remarkably increase the Seebeck coefficient, and thus enhancing the material’s power factor. This improvement of TE power factor was attributed to the coating homogeneity and the good interaction between PPy and MWCNTs mainly through π–π stacking between the polymer chains and the nanotubes as well as electrostatic, hydrogen bonding, and electrons donor/acceptor groups interactions due to the functional groups grafted on the nanotube’s sidewall. The highest power factor value (0.51 μWm−1K−2) was obtained with PPy/MWCNTs-SH, which means an enhancement of 8 folds compared to pure PPy. Considering the content of MWCNTs and the ease of preparation process, these results might help to develop future TE materials and devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Applications in thermoelectricity10.1016/j.matpr.2017.12.273 ↗
2. Chapter 9 - Defects in crystals and crystallographically challenged materials
3. Thermoelectricity and thermoelectric power generation10.1016/0038-1101(68)90104-4 ↗
4. Figure of merit ZT of a thermoelectric device defined from materials properties10.1039/C7EE02007D ↗
5. Carbon nanotube-based organic thermoelectric materials for energy harvesting10.3390/polym10111196 ↗
6. High-performance thermoelectric materials based on ternary TiO2/CNT/PANI composites10.1039/C7CP07896J ↗
7. Thermoelectric behavior of PEDOT:PSS/CNT/graphene composites10.1515/polyeng-2017-0179 ↗
8. One-dimensional nanocomposites based on polypyrrole-carbon nanotubes and their thermoelectric performance10.3390/polym13020278 ↗
9. Electrochemically produced copolymers of pyrrole and its derivatives: a plentitude of material properties using “simple” heterocyclic co-monomers10.3390/ma14020281 ↗
10. Polypyrrole nanostructures and their thermoelectric performance10.1039/C6QM00061D ↗
11. Preparation and thermoelectric properties of multi-walled carbon nanotubes/polypyrrole composites10.1016/j.synthmet.2014.06.003 ↗
12. Carbon and carbon composites for thermoelectric applications10.1002/cey2.68 ↗
13. Effect of functional groups on the thermoelectric performance of carbon nanotubes10.1007/s11664-019-07519-6 ↗
14. Single-walled carbon nanotube / polypyrrole thermoelectric composite materials10.1088/1755-1315/108/2/022040 ↗
15. Free-standing flexible multiwalled carbon nanotubes paper for wearable thermoelectric power generator10.1016/j.jpowsour.2019.227493 ↗
16. Decoration of tricarboxylic and monocarboxylic aryl diazonium functionalized multi-wall carbon nanotubes with iron nanoparticles10.1007/s10853-017-1100-z ↗
17. Residue catalyst support removal and purification of carbon nanotubes by NaOH leaching and froth flotation10.1016/j.seppur.2007.08.009 ↗
18. Characterization of multi-walled carbon nanotubes functionalized by a mixture of HNO3/H2SO410.1016/j.diamond.2018.08.008 ↗
19. Multi-wall carbon nanotubes decorated with bismuth oxide nanocrystals using infrared irradiation and diazonium chemistry10.1007/s10904-018-0800-4 ↗
20. Response surface methodology as a powerful tool for the synthesis of polypyrrole-doped organic sulfonic acid and the optimization of its thermoelectric properties10.1007/s11664-019-07124-7 ↗
21. C.R.K. Rao, R. Muthukannan, J.A. Jebin, T.A. Raj, M. Vijayan, Synthesis and properties of polypyrrole obtained from a new Fe(III) complex as oxidizing agent, IJC- Vol52A06 June 2013 (2013). 〈http://nopr.niscair.res.in/handle/123456789/18708〉 (accessed November 4, 2021).
22. Diazonium salts: versatile molecular glues for sticking conductive polymers to flexible electrodes10.3390/surfaces1010005 ↗
23. Solution-processed two-dimensional layered heterostructure thin-film with optimized thermoelectric performance10.1039/C7CP02011B ↗
24. Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes10.1039/c2ee22838f ↗
25. Study on dispersion and characterization of functionalized MWCNTs prepared by wet oxidation10.4028/www.scientific.net/AMM.661.8 ↗
26. H. Bares, Fonctionnalisation chimique du graphène: vers des matériaux bidimentionnels photo actifs pour la reconnaissance et l′électronique moléculaire, (n.d.) 197.
27. Hierarchical nanostructured polypyrrole/graphene composites as supercapacitor electrode10.1039/C4RA15258A ↗
28. Polarons, bipolarons, and solitons in conducting polymers10.1021/ar00118a005 ↗
29. Study of polypyrrole-coated MWCNT nanocomposites for ammonia sensing at room temperature
30. Directly-grown hierarchical carbon nanotube@polypyrrole core–shell hybrid for high-performance flexible supercapacitors10.1002/cssc.201501495 ↗
31. Effect of MWCNT functionalization on thermal and electrical properties of PHBV/MWCNT nanocomposites10.1557/jmr.2014.303 ↗
32. Characterization of functionalized multiwalled carbon nanotubes and comparison of their cellular toxicity between HEK 293 cells and zebra fish in vivo10.1016/j.heliyon.2019.e02605 ↗
33. Surface-modified gold nanoparticles with folic acid as optical probes for cellular imaging10.3390/s8106660 ↗
34. Fabrication of device quality films of high loaded PPy/MWCNT nanocomposites using pulsed laser deposition10.1016/j.orgel.2010.06.013 ↗
35. Polypyrrole-coated multi-walled carbon nanotubes for the simple preparation of counter electrodes in dye-sensitized solar cells10.1016/j.synthmet.2015.10.020 ↗
36. A molecular viewpoint of lattice dynamics and spectra of conducting polymers10.1016/0379-6779(89)90715-7 ↗
37. The enhanced power factor of multi-walled carbon nanotube/stabilized polyacrylonitrile composites due to the partially conjugated structure
38. Electronic properties of carbon nanotubes with covalent sidewall functionalization10.1021/jp036814u ↗
39. T. Olla, Ingénierie moléculaire de polymères semi-conducteurs halogénés: influence de la nature et de la position des halogènes, phdthesis, Université de Strasbourg, 2019. 〈https://tel.archives-ouvertes.fr/tel-03238204〉 (Accessed August 12, 2021).