journal article·2017-03

Thermoelectric power generation using nonwoven fabric module impregnated with conducting polymer PEDOT:PSS

Kazuhiro Kirihara, Qingshuo Wei, Masakazu Mukaida, Takao Ishida

Synthetic Metals· Volume 225
Publisher page

Abstract

Abstract We report the transport properties of nonwoven fabric-composite thermoelectric (TE) elements impregnated with the polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). The porous structure formed in the fabric after the solvent evaporation of the PEDOT:PSS solution resulted in a high thermal resistance. In addition, the polymer films covering the surface of the fibers in the fabric connected the fibers to form electrical conduction paths, resulting in isotropic electrical conductivity at high PEDOT:PSS concentrations. These two factors provided the optimum PEDOT:PSS concentration for the TE power density per PEDOT:PSS content. Optimizing the TE power density per polymer content could contribute to the low-cost fabrication of TE modules from conducting polymers. We also demonstrated that the flexible TE module fabricated from the nonwoven fabric-composite achieved a power output sufficient to power a light-emitting diode. Contact electrical resistance at polymer-electrode junctions was greatly reduced by the increase in contact area arising from the wavy surface of the fabric composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Complex thermoelectric materials10.1038/nmat2090 ↗
2. Recent progress on PEDOT-Based thermoelectric materials10.3390/ma8020732 ↗
3. Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently10.1002/adma.201305371 ↗
4. Power factor enhancement in solution-processed organic n-type thermoelectrics through molecular design10.1002/adma.201306116 ↗
5. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
6. Organic thermoelectric materials and devices based on p- and n-Type poly(metal 1,1,2,2-ethenetetrathiolate)s10.1002/adma.201104305 ↗
7. Poly(3 4-ethylenedioxythiophene) as promising organic thermoelectric materials: a mini-review10.1016/j.synthmet.2012.04.005 ↗
8. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
9. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
10. Thermoelectric power enhancement of PEDOT:PSS in high-humidity conditions10.7567/APEX.7.031601 ↗
11. Experimental studies on the anisotropic thermoelectric properties of conducting polymer films10.1021/mz500446z ↗
12. Measurement of in-plane thermal conductivity in polymer films10.1063/1.4948447 ↗
13. Characterization and application of conducting polymer coated textiles10.1142/S0217979209060750 ↗
14. Electrically controlled colour-changing textiles using the resistive heating properties of PEDOT nanofibers10.1039/c0jm02307h ↗
15. Organic electronics on natural cotton fibres10.1016/j.orgel.2011.09.001 ↗
16. Fabrication of flexible conductive films derived from poly(3,4-ethylenedioxythiophene)epoly(styrenesulfonic acid) (PEDOT:PSS) on the nonwoven fabrics substrate10.1016/j.matchemphys.2013.08.037 ↗
17. Highly conductive paper for energy-storage devices10.1073/pnas.0908858106 ↗
18. Flexible supercapacitors based on 3D conductive network electrodes of poly(3 4-ethylenedioxythiophene)/non-woven fabric composites10.1039/C5RA07297B ↗
19. Anisotropic motion of electroactive papers coated with PEDOT/PSS10.1002/mame.201000013 ↗
20. Effect of spinning condition and fiber alignment on performance ofionic polymer gel actuators with nanofiber mat electrodes10.1016/j.snb.2015.02.129 ↗
21. Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity10.1021/ma502099t ↗
22. Paper: an effective substrate for the enhancement of thermoelectric properties in PEDOT:PSS10.1002/polb.23482 ↗
23. Advanced thermal insulation and absorption properties of recycled cellulose aerogels10.1016/j.colsurfa.2014.01.015 ↗
24. Morphological change and mobility enhancement in PEDOT:PSS by adding Co-solvents10.1002/adma.201205158 ↗
25. Specific contact resistance measurements on semiconductors10.1088/0022-3735/22/5/010 ↗
26. Practical contact resistance measurement method for bulk Bi2Te3-Based thermoelectric devices10.1007/s11664-013-2806-6 ↗
27. Contact resistance of dibenzotetrathiafulvalene-based organic transistors with metal and organic electrodes10.1063/1.2834374 ↗
28. On the origin of contact resistances of organic thin film transistors10.1002/adma.201201311 ↗