Synchronously optimized anti-corrosion and tensile properties with lower strain rate sensitivity of nanocrystalline 304 stainless steel plate during service
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Investigation of oxygen evolution reaction with 316 and 304 stainless-steel mesh electrodes in natural seawater electrolysis10.1016/j.jece.2023.109667 ↗
2. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
3. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
4. Development of low-emission next-generation stainless steel E304–16 and E316–16 synthetic electrodes with mild steel Core wire
5. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
6. Cu-rich nano precipitates simultaneously enhance the tensile properties, antibacterial efficacy, and corrosion resistance of ultra-high strength steel10.1016/j.actamat.2025.121026 ↗
7. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
8. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
9. Temperature and loading-rate dependent critical stress intensity factor of dislocation nucleation from crack tip: atomistic insights into cracking at slant twin boundaries in nano-twinned TiAl alloys10.1016/j.jmst.2024.10.007 ↗
10. Origin of dramatic oxygen solute strengthening effect in titanium10.1126/science.1260485 ↗
11. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility- toughness combination in CrCoNi medium-entropy alloy10.1038/ncomms14390 ↗
12. Brittle intermetallic compound makes ultra-strong low-density steel with large ductility10.1038/nature14144 ↗
13. From mechanical behavior and elastocaloric effect to microscopic mechanisms of gradient-structured NiTi alloy: a phase-field study10.1016/j.ijplas.2023.103809 ↗
14. Dislocation network in additive manufactured steel breaks strength-ductility trade-off10.1016/j.mattod.2017.11.004 ↗
15. Simultaneous improvement of strength and plasticity: additional work-hardening from gradient microstructure10.1016/j.actamat.2017.12.028 ↗
16. Regain strain-hardening in high-strength metals by nanofiller incorporation at grain boundaries10.1021/acs.nanolett.8b02375 ↗
17. An experimental evaluation on rate sensitivity of fracture toughness in sheet specimens made of SUS304 metastable austenitic stainless steel10.1016/j.engfracmech.2024.109905 ↗
18. Strain rate dependence of mechanical property in a selective laser melted 17-4 PH stainless steel with different states10.1016/j.msea.2020.139776 ↗
19. Effect of phosphorus content on the mechanical, microstructure and corrosion properties of supermartensitic stainless steel10.1016/j.msea.2015.10.013 ↗
20. Enhanced pitting corrosion resistance of nanostructured AISI 304 stainless steel via pipe inner surface grinding treatment10.3390/nano13020318 ↗
21. Han · 2025 · 35 · 5034
22. Pitting corrosion of 304ss nanocrystalline thin film10.1016/j.corsci.2013.03.022 ↗
23. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review10.1016/j.corsci.2014.11.041 ↗
24. Effect of warm deformation on mechanical properties and deformation mechanism of nano/ultrafine-grained 304 stainless steel10.1002/srin.202200198 ↗
25. Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing10.1016/j.corsci.2011.08.049 ↗
26. Y, Gao, achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing10.1016/j.msea.2016.11.004 ↗
27. Anisotropy investigation of an ECAP-processed Mg-Al-ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance10.1016/j.jallcom.2022.165046 ↗
28. Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying10.1016/j.matdes.2015.06.120 ↗
29. Enhanced localized and uniform corrosion resistances of bulk nanocrystalline 304 stainless steel in high-concentration HCl solutions at room temperature10.1016/j.jmst.2018.06.006 ↗
30. Synchronous optimization of strengths, ductility and corrosion resistances of bulk nanocrystalline 304 stainless steel10.1016/j.jmst.2019.05.073 ↗
31. Y. Chen, C.B. Gong, S.G. Wang, S. Ma, Z.D. Zhang, Microstructure, microhardness, and corrosion properties of nanocrystalline 304 stainless steel plates. Acta Metall. Sin. 2024; In press, DOI: 10.11900/0412.1961.2024.00253.
32. The significant impact of grain structure on large strain-rate sensitivity of ultrafine-grained low alloy steel under nanoscale deformation: experimental and theoretical analysis10.1016/j.msea.2019.04.028 ↗
33. Prediction of superplasticity of austenitic stainless steel-304 at hot working temperatures10.1016/j.matpr.2019.07.148 ↗
34. Enhanced mechanical behaviors of gradient nano-grained austenite stainless steel by means of ultrasonic impact treatment10.1016/j.rinp.2017.04.002 ↗
35. Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel10.1016/j.msea.2017.11.017 ↗
36. Influence of strain rate, temperature, plastic strain, and microstructure on the strain rate sensitivity of automotive sheet steels10.1002/srin.201200120 ↗
37. Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys10.1016/j.scriptamat.2015.02.023 ↗
38. Temperature and grain size dependent plastic instability and strain rate sensitivity of ultrafine grained austenitic Fe–14Cr–16Ni alloy10.1016/j.msea.2014.01.003 ↗
39. Strain-rate dependence of mechanical behavior and deformation mechanisms in bimodal nanostructured Ni under micro-scratch testing10.1016/j.mechmat.2018.03.005 ↗
40. Strain rate sensitivity of ultrafine-grained aluminium processed by severe plastic deformation10.1016/j.scriptamat.2005.03.043 ↗
41. Mechanism transition of cross slip with stress and temperature in face-centered cubic metals10.1016/j.jmst.2020.04.035 ↗
42. Forecasting low-cycle fatigue performance of twinning-induced plasticity steels: difficulty and attempt10.1007/s11661-017-4360-y ↗
43. Microstructural origins of cycle hardening behaviors and fracture mechanisms of 304L stainless steel during low-cycle fatigue10.1016/j.ijfatigue.2025.108859 ↗
44. Effect of strain rate on microstructures and mechanical properties of Fe–18Cr–8Ni steel10.1080/02670836.2018.1548113 ↗
45. Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism10.1016/j.msea.2014.06.065 ↗
46. Exceptional tensile properties under cryogenic temperature in heterogeneous laminates induced by non-uniform martensite transformation and strain delocalization10.1016/j.msea.2020.139780 ↗
47. Effect of cold rolling on the microstructural, magnetic, mechanical, and corrosion properties of AISI 316L austenitic stainless steel10.1007/s12613-018-1610-y ↗
48. Effect of strain rate on quasistatic tensile flow behavior of solution annealed 304 austenitic stainless steel at room temperature10.1007/s10853-010-4605-2 ↗
49. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel10.1016/j.corsci.2013.04.056 ↗
50. Investigation on pitting corrosion behavior of ultrafine-grained 304L stainless steel in cl− containing solution
51. Nanoscale deformation experiments on the strain rate sensitivity of phase reversion induced nanograined/ultrafine-grained austenitic stainless steels and comparison with the coarse-grained counterpart10.1016/j.msea.2012.04.005 ↗
52. High-strain-rate response of ultra-fine-grained copper10.1016/j.actamat.2008.02.023 ↗
53. Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion10.1016/j.actamat.2010.12.042 ↗
54. Experimental study on high-cycle fatigue behaviour of butt welds made of corroded AISI 304 stainless steel and Q460 high-strength steel10.1016/j.istruc.2024.106141 ↗
55. Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel10.1016/j.tws.2019.106393 ↗
56. Effects of corrosion morphology on the fatigue life of corroded Q235B and 42CrMo steels: numerical modelling and proposed design rules10.1016/j.istruc.2023.105136 ↗
57. Improved tensile properties, stable microstructures and isotropic deformation of nanocrystalline 304 stainless steel10.1016/j.jmrt.2022.12.197 ↗
58. The high-temperature oxidation of bulk nanocrystalline 304 stainless steel in air10.1016/j.corsci.2013.03.008 ↗
59. Tensile deformation of fine-grained Mg at 4 K, 78 K and 298 K10.1016/j.jma.2024.06.012 ↗
60. Size-dependent role of surfaces in the deformation of platinum nanoparticles10.1021/acsnano.2c11457 ↗
61. Micromechanical finite element analysis of the effects of martensite morphology on the overall mechanical behavior of dual phase steel10.1016/j.ijsolstr.2016.11.005 ↗
62. Morphology and distribution of martensite in dual phase (DP980) steel and its relation to the multiscale mechanical behavior10.1016/j.msea.2016.02.048 ↗
63. Microstructure evolution and SSCC behavior of strain-strengthened 304 SS pre-strained at room temperature and cryogenic temperature10.1016/j.corsci.2022.110855 ↗
64. Insight into microstructure, microhardness and corrosion performance of 2205 duplex stainless steel: effect of plastic pre-strain10.1016/j.corsci.2022.110847 ↗
65. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
66. Improvement of corrosion resistance of twinning-induced plasticity steel by hot-dipping aluminum with subsequent thermal diffusion treatment10.1016/j.matlet.2019.04.001 ↗
67. Effects of nano-grains and deformation nano-twins on electrochemical corrosion behavior of DZ125 nickel-based superalloy10.1002/adem.201800279 ↗
68. Surface integrity and corrosion resistance of 18CrNiMo7-6 gear steel subjected to combined carburized treatment and wet shot peening10.1016/j.surfcoat.2024.130862 ↗
69. Influence of grain refinement on the corrosion behavior of metallic materials: a review10.1007/s12613-021-2308-0 ↗
70. Effect of grain size on pitting corrosion of 304L austenitic stainless steel10.1016/j.corsci.2015.02.024 ↗
71. Understanding the effect of Ni on mechanical and wear properties of low-carbon steel from a view-point of electron work function10.1007/s11661-018-4616-1 ↗
72. Mechanical properties and work function of L21 structure AlCu2X (X= Ti, Mn, Zr, or Hf) intermetallics10.1016/j.msea.2012.02.066 ↗
73. Understanding the corrosion behavior of isomorphous cu-Ni alloy from its electron work function10.1016/j.matchemphys.2016.02.009 ↗
74. The electrochemical corrosion characterization of bulk nanocrystalline aluminium by X-ray photoelectron spectroscopy and ultra-violet photoelectron spectroscopy10.1016/j.jelechem.2014.04.014 ↗
75. The electrochemical corrosion of bulk Nanocrystalline ingot iron in HCl solutions with different concentrations10.1016/j.matchemphys.2011.02.035 ↗
76. High-temperature oxidation of Ti1-xAlxN (x = 0, 0.26, 0.45 and 0.67) coatings on 304 stainless steel in air10.1016/j.vacuum.2024.113691 ↗
77. Crystallographic orientation control of pure chromium via laser powder bed fusion and improved high temperature oxidation resistance
78. Nanocrystalline Ti49.2Ni50.8 shape memory alloy as orthopaedic implant material with better performance10.1016/j.jmst.2019.04.026 ↗
79. Effect of co vs. Fe content on early stages of oxidation of co-Cr-Fe-Mn-Ni-Si complex concentrated alloys at 800 °C10.1016/j.corsci.2023.111594 ↗
80. Ellingham diagram: a new look at an old tool10.1016/j.corsci.2023.111113 ↗
81. Effects of precipitated phase on the synergy of corrosion resistance and mechanical properties for FeCrVTix medium-entropy alloys10.1016/j.corsci.2023.111508 ↗
82. Oxidation behavior of the directed energy deposited 316L stainless steel in supercritical carbon dioxide environment: effect of post-manufacturing heat treatment
83. Adsorption and diffusion behavior of cl- on sputtering Fe-20Cr nanocrystalline thin film in acid solution (pH = 2)10.1016/j.jmst.2015.10.016 ↗
84. Enhancement of DC flashover voltage of epoxy insulators and gap breakdown voltage in SF6 gas by direct fluorination of metal electrodes10.1109/TDEI.2023.3337212 ↗