journal article·2022-03-01Open access

Enhanced performance of electrodeposited Ni-SiC plating as an alternative to electroplated chromium deposits: the effect of pulse duty cycle

Q W Wang, J L Huang, J N Liu, Y F Yang, G F Han, W Li

Abstract

Abstract Ni-SiC composite coating was prepared by the electrodeposition under the pulse current as an alternative for the environment polluted and human cancerogenic hard chromium plating. The microstructure and tribological performance of the composite coating under different duty cycles were studied. The results showed that the mechanical performance of the Ni-SiC can be optimized by adjusting the pulse duty cycle. With the increase of the duty cycle, the grain size of the Ni matrix are refined and the friction coefficient of the coating are decreasing. Composite coating obtained with 80% duty cycle possesses the lowest wear volume during the friction and wear test. The effect of the duty cycle on the microstructure and tribological performance of the composite coating were discussed. Moreover, the co-deposition mechanism of Ni atoms and the SiC particles under the pulse current were discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Brief study on Restriction of Hazardous Substances Directive (RoHS)10.1038/nature.2013.13114 ↗
2. Formation of amorphous electrodeposited Ni-W alloys and their nanocrystallization10.1016/S0965-9773(98)00078-6 ↗
3. Electroless deposition of Ni–Cu–P, Ni–W–P and Ni–W–Cu–P alloys10.1016/j.surfcoat.2004.07.068 ↗
4. Electrodeposition and characterization of Co-W alloy from regenerated tungsten salt10.20964/2017.02.37 ↗
5. Effect of temperature and current density in electrodeposited Co–W magnetic nano thin film, Dig
6. Co-W alloys for replacement of conventional hard chromium
7. Corrosion behaviour of compositionally modulated nanocrystalline Ni–W coatings10.1080/02670844.2019.1660035 ↗
8. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying10.2351/1.4943910 ↗
9. High speed laser cladding of an iron based alloy developed for hard chrome replacement10.2351/1.5096142 ↗
10. Corrosion resistance of HVOF-sprayed coatings for hard chrome replacement10.1016/j.corsci.2006.03.001 ↗
11. Plasma and HVOF sprayed WC–Co coatings as hard chrome replacement solution10.1179/1743294410Y.0000000009 ↗
12. Replacement of hard chromium plating by thermal spraying–problems, solutions and possible future approaches10.1179/174329409X373729 ↗
13. PVD coatings as an environmentally clean alternative to electroplating and electroless processes10.1016/S0257-8972(99)00145-0 ↗
14. Comparison of reciprocating wear behaviour of electrolytic hard chrome and arc-PVD CrN coatings10.1016/S0043-1648(03)00523-4 ↗
15. Investigation on wear and corrosion behavior of Cu–graphite composites prepared by electroforming10.1016/j.compscitech.2006.05.013 ↗
16. Friction and wear properties of the co-deposited Ni–SiC nanocomposite coating10.1016/j.apsusc.2007.04.047 ↗
17. Fabrication of Ni–Co–SiC composite coatings by pulse electrodeposition—Effects of duty cycle and pulse frequency10.1016/j.surfcoat.2012.11.059 ↗
18. Electrochemical deposition and tribological behaviour of Ni and Ni–Co metal matrix composites with SiC nano-particles10.1016/j.apsusc.2006.08.022 ↗
19. Electroplating of metal matrix composites by codeposition of suspended particles10.1007/0-387-25838-8_6 ↗
20. A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology10.1179/0020296713Z.000000000161 ↗
21. Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition10.1016/j.msea.2004.03.016 ↗
22. Electro co-deposition and characterization of SiC in nickel metal matrix composite coatings on aluminium 707510.1016/j.proeng.2014.12.433 ↗
23. Electrodeposition of cerium-based coatings for corrosion protection of aluminum alloys
24. Review of nickel-based electrodeposited tribo-coatings10.1007/s12666-017-1175-x ↗
25. Improvement of wear and corrosion resistance of AZ91 magnesium alloy by applying Ni–SiC nanocomposite coating via pulse electrodeposition10.1016/S1003-6326(13)62814-9 ↗
26. Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics10.1016/j.colsurfa.2007.07.027 ↗
27. Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC composites10.1016/j.apsusc.2008.03.151 ↗
28. Influence of pulse frequency on the microstructure and wear resistance of electrodeposited Ni–Al2O3 composite coatings10.1016/j.surfcoat.2005.12.008 ↗
29. Effect of pulse current on wear behavior of Ni matrix micro-and nano-SiC composite coatings at room and elevated temperature10.1016/j.triboint.2018.12.011 ↗
30. Pulse plating of Ni–B/WC nanocomposite coating and study of its corrosion and wear resistance10.1080/02670836.2019.1619292 ↗
31. Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings10.1016/j.matdes.2016.09.070 ↗
32. Composite plating of Ni/SiC using azo-cationic surfactants and wear resistance of coatings10.1016/S0043-1648(03)00138-8 ↗
33. Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni–CeO2 nanocomposite coating10.1016/j.materresbull.2011.10.011 ↗
34. Kinetics of the deposition of inert particles from electrolytic baths10.1149/1.2404383 ↗
35. A mathematical model for the electrolytic codeposition of particles with a metallic matrix10.1149/1.2100680 ↗
36. Pulse electrodeposition of Ni–SiC nanocomposite10.1016/S0167-577X(01)00371-8 ↗
37. Preparation and wear properties of magnetic assisted pulse electrodeposited Ni–SiC nanocoatings10.1016/j.ceramint.2018.07.242 ↗
38. Assessment on the microhardness and corrosion resistance characteristics of Ni-SiC and Ni-MWCNT coatings by pulse reverse electrodeposition technique10.1088/2053-1591/ab8e6e ↗
39. Fabrication of Sn–Ni/MWCNT composite coating for Li-ion batteries by pulse electrodeposition: effects of duty cycle10.1016/j.apsusc.2014.08.073 ↗
40. Characteristics of electrocodeposited Ni-Co-SiC composite coating10.1007/BF02914080 ↗