journal article·2021-09-01

Taguchi approach and decision tree algorithm for prediction of wear rate in zinc oxide-filled AA7075 matrix composites

S V Alagarsamy, R Balasundaram, Ravichandran M, V Mohanavel, Alagar Karthick, S Sathiya Devi

Publisher page

Abstract

Abstract This work aims to apply data-driven approach [decision tree (DT) algorithm] to analyse the wear rate (WR) of ZnO-filled AA7075 composites. The results of model-based analysis was compared with Taguchi analysis. Stir casting was used to produce the composite samples. Characterization studies were conducted to analyse the composition and morphology. The scanning electron microscopy results indicated the even dispersion of ZnO in the AA7075. The energy-dispersive x-ray spectroscopy pattern ensures the presence of matrix elements and the inclusion of reinforcement particles into the proposed composites. To minimize the number of experimentation, L27 Orthogonal array is used for finding WR. The ‘DuCom’ Pin-on-Disc apparatus were used to prepare WR data for the set of the proposed composites. Taguchi technique reveals the optimum level factors for obtaining the minimum ‘WR’ is reinforcement content of 10 wt.%, applied load (P) at 10 N, sliding velocity (V) at 1 m s −1 and sliding distance (D) of 1000 m. The experiments results from DT algorithm, and analysis of variance and signal-to-noise ratio analysis from Taguchi-based approach confirmed that reinforcement is the primary element for affecting wear of the composites. The reason for applying DT algorithm is that, the low-level knowledge could be converted into high-level knowledge (If-then-else rules), which can be effortlessly explicable by semiskilled personnel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A datamining approach to classify, select and predict the formation enthalpy for intermetallic compound hydrides10.1016/j.ijhydene.2018.08.122 ↗
2. The data mining industry coming of age10.1109/5254.809566 ↗
3. An integrated data mining model for manufacturing enterprises
4. From data to big data in production research: the past and future trends10.1080/00207543.2018.1443230 ↗
5. A data mining in manufacturing: a review10.1115/1.2194554 ↗
6. Data mining solves tough semi conductor problems
7. Han · 2011
8. Prediction of surface roughness and tool wear in milling process on brass (C26130) alloy by Taguchi technique10.1016/j.matpr.2019.04.219 ↗
9. Dry sliding wear and friction studies on AlSi10Mg–fly ash–graphite hybrid metal matrix composites using Taguchi method
10. A study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites10.1016/j.compositesb.2013.08.013 ↗
11. Dry sliding wear characterization of squeeze cast LM13/FeCu composite using response surface methodology10.1007/s41230-017-7101-3 ↗
12. Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles
13. Experimental investigations of Al–TiO2–Gr hybrid composites fabricated by stir casting10.3139/120.110839 ↗
14. Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route10.1088/2053-1591/ab1d3b ↗
15. Mechanical and physical properties of aluminium-silicon (Al–Si) casting alloys reinforced by Zinc Oxide (ZnO)10.1051/matecconf/201820405003 ↗
16. Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites10.1016/j.matdes.2014.06.054 ↗
17. Dry sliding wear behaviour of Aluminium Al–Si2Cu/TiB2 metal matrix composite using response surface methodology10.1007/s11249-015-0516-3 ↗
18. Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using taguchi technique10.1016/j.matdes.2014.03.074 ↗
19. Analysis of dry sliding friction and wear behaviour of AA6351–SiC–B4C composites using grey relational analysis
20. Optimization of tribological properties in aluminium hybrid metal matrix composites using gray-taguchi method10.1007/s11665-010-9800-4 ↗
21. Induction of decision trees10.1007/BF00116251 ↗
22. Parametric studies on dry sliding wear behaviour of A1-7075 alloy matrix composite using S/N ratio and ANOVA analysis10.1088/2053-1591/ab654a ↗
23. Synthesis and characterization of ZA-27 alloy matrix compositesreinforced with zinc oxide nanoparticles10.1016/j.jestch.2017.01.001 ↗
24. Parametric optimization of EDM process on α–β brass using Taguchi approach. Russian10.3103/S1067821216060109 ↗
25. Microstructure analysis and optimization of parameters for improved properties in high strength AA8079 (Al–Fe–Cu–Si–Zn)10.1134/S0031918X20040092 ↗
26. Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions10.1108/ILT-01-2019-0003 ↗
27. Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites10.1016/j.matdes.2014.06.054 ↗
28. Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique10.1016/j.matdes.2014.03.074 ↗