journal article·2021-10

Quantitative analysis of the volume expansion of nanotubes during constant voltage anodization

Yilin Ni, Jin Zhang, Tianle Gong, Ming Sun, Ziyu Zhao, Xin Li, Huiwen Yu, Xufei Zhu

Publisher page

Abstract

Abstract The formation process of anodized nanotubes and the reason of volume expansion are still the focus of attention. So far, the traditional field-assisted dissolution and ejection mechanisms have only qualitatively discussed the phenomenon that the growth efficiency of the porous oxide film is about 60% of that of the barrier film, and the corresponding volume expansion factor is about 1.44 (2.4 × 60%). Here, the nanotubes prepared by applying different constant voltages in five kinds of NH4F concentration electrolyte were studied in detail. For the first time, the charges transferred in the process of constant voltage anodization was calculated by integral, thus the volume expansion factors under different conditions were calculated. We found that when the number of charges transferred by the reaction was similar, the total volume hardly changed, and it is independent of the NH4F concentration. The volume expansion factors (about 2.0) did not change with the increase of NH4F content, which is contrary to the expectations of the field-assisted dissolution and ejection. This study will help to promote the qualitative to quantitative study of the volume expansion of anodized TiO2 nanotubes under constant voltage. It is helpful to understand the growth kinetics of porous oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Smart Materials for Construction · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Morphology evolution of the anodized tin oxide film during early formation stages at relatively high constant potential10.1016/j.surfcoat.2020.125592 ↗
2. Revisiting anodic alumina templates: from fabrication to applications10.1039/D0NR07582E ↗
3. Effects of anodizing potential and temperature on the growth of anodic TiO2 and its photoelectrochemical properties10.1016/j.apsusc.2016.11.097 ↗
4. The effect of the current pulse amplitude on the nanopore structures of 3D-AAO films10.1016/j.micromeso.2020.110575 ↗
5. Ultra-slow growth rate: accurate control of the thickness of porous anodic aluminum oxide films10.1016/j.elecom.2019.106602 ↗
6. Anodization of electrodeposited titanium flms towards TiO2 nanotube layers10.1016/j.elecom.2020.106788 ↗
7. Double-anode anodization of metal Ti in two beakers10.1016/j.elecom.2021.106991 ↗
8. One-dimensional titanium dioxide nanomaterials: nanotubes10.1021/cr500061m ↗
9. Hydroxyapatite growth on anodic TiO2 nanotubes10.1002/jbm.a.30677 ↗
10. Investigation of grain radius dependence of sensitivity for porous thin film semiconducting metal oxide gas sensor10.1109/JSEN.2019.2961388 ↗
11. TiO2 nanotubes: H+ insertion and strong electrochromic effects10.1016/j.elecom.2006.01.015 ↗
12. Efficient oxygen reduction on layers of ordered TiO2 nanotubes loaded with Au nanoparticles10.1016/j.elecom.2007.04.002 ↗
13. Intracellular wireless analysis of single cells by bipolar electrochemiluminescence confined in a nanopipette10.1002/anie.202002323 ↗
14. Self-assembled anodization of NiTi alloys for biomedical applications10.1016/j.apsusc.2020.146118 ↗
15. Titanium dioxide photocatalysis10.1016/S1389-5567(00)00002-2 ↗
16. Photocatalytic degradation of methylene blue using a ZnO/TiO2 heterojunction nanomesh electrode
17. Fabrication of nanoporous TiO2 by electrochemical anodization10.1016/j.electacta.2009.12.053 ↗
18. Influence of the Ti microstructure on anodic self-organized TiO2 nanotube layers produced in ethylene glycol electrolytes10.1016/j.apsusc.2016.03.012 ↗
19. The morphology and mechanism of formation of porous anodic films on aluminium10.1098/rspa.1970.0129 ↗
20. A lithographic approach to determine volume expansion factors during anodization: using the example of initiation and growth of TiO2-nanotubes10.1016/j.electacta.2009.05.064 ↗
21. A novel nanostructure fabricated by an improved two-step anodizing technology10.1016/j.elecom.2013.01.018 ↗
22. Tracer investigation of pore formation in anodic titania10.1149/1.2946727 ↗
23. A flow model of porous anodic film growth on aluminium10.1016/j.electacta.2006.05.054 ↗
24. Development of stacked porous tantalum oxide layers by anodization10.1016/j.apsusc.2020.145542 ↗
25. Effect of the anodization conditions on the growth and volume expansion of porous alumina films in malonic acid electrolyte10.1016/j.surfcoat.2015.04.030 ↗
26. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures10.1021/cr500002z ↗
27. Oxide growth efficiencies and self-organization of TiO2 nanotubes10.1149/2.015208jes ↗
28. Self-ordering regimes of porous alumina: the 10% porosity rule10.1021/nl025537k ↗
29. Hexagonal pore arrays with a 50–420 nm interpore distance formed by self-organization in anodic alumina10.1063/1.368911 ↗
30. Self-organized formation of hexagonal pore arrays in anodic alumina10.1063/1.121004 ↗
31. High aspect ratio TiO2 nanotube layers obtained in a very short anodization time10.1016/j.electacta.2021.138080 ↗
32. Self-organized anodic TiO2 nanotube layers: influence of the Ti substrate on nanotube growth and dimensions10.1016/j.electacta.2015.12.121 ↗
33. TiO2 nanostructures with controlled morphology for improved electrical properties of photoanodes and quantum dot sensitized solar cell characteristics
34. TiO2 nanotube arrays with a volume expansion factor greater than 2.0: evidence against the field-assisted ejection theory10.1016/j.elecom.2020.106717 ↗
35. Influence of anodization parameters on the expansion factor of TiO2 nanotubes10.1016/j.electacta.2012.12.094 ↗
36. Debunking the effect of water content on anodizing current: evidence against the traditional dissolution theory10.1016/j.elecom.2020.106815 ↗
37. Quantitative relationship between nanotube length and anodizing current during constant current anodization10.1016/j.electacta.2015.08.098 ↗
38. Simulation of anodizing current-time curves and morphology evolution of TiO2 nanotubes anodized in electrolytes with different NH4F concentrations10.1016/j.electacta.2015.07.110 ↗
39. Anodic oxide films on aluminum10.1021/cr60259a005 ↗
40. TiO2 nanotubes, nanochannels and mesosponge: self-organized formation and applications10.1016/j.nantod.2013.04.010 ↗
41. Fabrication and application of nanoporous anodic aluminum oxide: a review
42. TiO2 nanotubes: synthesis and applications10.1002/anie.201001374 ↗
43. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
44. Anodization of aluminum in a sealed container10.1016/j.elecom.2021.107086 ↗
45. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes10.1016/j.mser.2013.10.001 ↗
46. The role of electric field in pore formation during aluminum anodization10.1016/j.electacta.2011.02.002 ↗
47. Anodic growth of titanium oxide: electrochemical behaviour and morphological evolution10.1016/j.electacta.2012.04.114 ↗
48. Role of oxide stress in the initial growth of self-organized porous aluminum oxide10.1016/j.electacta.2015.03.017 ↗
49. Terminated nanotubes: evidence against the dissolution equilibrium theory10.1016/j.elecom.2017.11.025 ↗
50. Studies of oxide growth location on anodization of Al and Ti provide evidence against the field-assisted dissolution and field-assisted ejection theories10.1016/j.elecom.2018.01.003 ↗
51. Bamboo shoot nanotubes with diameters increasing from top to bottom: evidence against the field-assisted dissolution equilibrium theory10.1016/j.elecom.2019.01.019 ↗
52. A theory of avalanche breakdown during anodic oxidation10.1016/0013-4686(87)85032-6 ↗
53. Oxygen bubble mould effect: serrated nanopore formation and porous alumina growth10.1007/s00706-008-0893-5 ↗
54. Electronic currents and the formation of nanopores in porous anodic alumina10.1088/0957-4484/20/47/475303 ↗
55. Quantitative analysis of oxide growth during Ti galvanostatic anodization10.1149/1945-7111/aba00b ↗
56. Comparative study on the anodizing process of Ti and Zr and oxide morphology10.1016/j.ceramint.2021.05.046 ↗
57. Growth model of the Tin anodizing process and the capacitive performance of porous Tin oxides10.1021/acs.jpcc.9b09648 ↗
58. Formation mechanism of gaps and ribs around anodic TiO2 nanotubes and method to avoid formation of ribs10.1149/2.0721504jes ↗
59. Evidence of oxygen bubbles forming nanotube embryos in porous anodic oxides10.1039/D1NA00389E ↗
60. Cavities between the double walls of nanotubes: evidence of oxygen evolution beneath an anion-contaminated layer10.1016/j.elecom.2018.03.009 ↗
61. Image binarization to calculate porosity of porous anodic oxides and derivation of porosity vs current10.1016/j.materresbull.2017.04.031 ↗