journal article·2025-09Open access

Additively manufactured 316L steel reinforced by multi-layer Ti3C2T for enhanced mechanical and bio-tribological performance

Sangharatna M. Ramteke, Jorge Ramos Grez, Andreas Rosenkranz, Max Marian

Abstract

Implant materials often suffer from wear, surface degradation, and poor biocompatibility, leading to reduced durability and compromised patient outcomes. Addressing these challenges requires the development of advanced biomaterials with enhanced mechanical strength and bio-tribological performance. In this context, we explore the incorporation of multi-layer Ti 3 C 2 T x into a 316L metal matrix to enhance mechanical and bio-tribological properties for biomedical applications. Metal matrix composites (MMCs) with 1, 2, and 3 wt.-% Ti 3 C 2 T x were fabricated using laser powder bed fusion (LPBF). Mechanical properties, including surface roughness and hardness, and the bio-tribological behavior were evaluated under dry and synovial body fluid (SBF)-lubricated conditions at 37 °C. Lower Ti 3 C 2 T x concentrations yielded smoother surfaces, while higher concentrations increased roughness due to particle agglomeration and clustering. However, the resulting hardness improved especially for an addition of 3 wt.-% Ti 3 C 2 T x . The 1 wt.-% Ti 3 C 2 T x MMCs reduced wear by 31 and 19 % under dry and SBF conditions, respectively, while balls wear (counter-bodies) were reduced by 51 and 13 %, respectively. These results highlight the potential of multi-layer Ti 3 C 2 T x to improve the durability and performance of medical devices, demonstrating their promise as advanced biomaterials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – a review article10.1016/j.jallcom.2017.04.231 ↗
2. An assessment of ultra fine grained 316L stainless steel for implant applications10.1016/j.actbio.2015.10.043 ↗
3. A review on parameters affecting properties of biomaterial SS 316L10.1080/14484846.2020.1752975 ↗
4. Metals for biomedical applications and devices10.1166/jbt.2012.1059 ↗
5. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
6. Additive manufacturing: an opportunity for the fabrication of near-net-shape NiTi implants10.3390/jmmp6030065 ↗
7. Additive manufacturing of metallic biomaterials: a concise review10.1007/s43452-023-00730-7 ↗
8. Surface engineering of additively manufactured titanium alloys for enhanced clinical performance of biomedical implants: a review of recent developments10.1016/j.bprint.2021.e00180 ↗
9. A comprehensive review on laser powder bed fusion of steels: processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends10.1016/j.jmapro.2021.12.033 ↗
10. A comprehensive review on surface post-treatments for freeform surfaces of bio-implants10.1016/j.jmrt.2023.02.007 ↗
11. Effects of graphene addition on the mechanical, friction and corrosion properties of laser powder bed fusion 316L stainless steel10.1016/j.jmrt.2024.06.061 ↗
12. Roadmap for 2D materials in biotribological/biomedical applications – a review10.1016/j.cis.2022.102747 ↗
13. 2D nanomaterials as lubricant additive: a review10.1016/j.matdes.2017.09.029 ↗
14. On the interface between biomaterials and two-dimensional materials for biomedical applications10.1016/j.addr.2022.114314 ↗
15. Tribological investigation of Ni-graphene oxide composite coating produced by pulsed electrodeposition10.1016/j.surfin.2018.05.001 ↗
16. Electrodeposited SiC-graphene oxide composite in nickel matrix for improved tribological applications
17. Ti3C2Tx‐UHMWPE nanocomposites—towards an enhanced wear‐resistance of biomedical implants
18. 2D transition metal carbides (MXenes) in metal and ceramic matrix composites10.1186/s40580-021-00266-7 ↗
19. Katiyar · 2021
20. Srivastava · 2024 · 1
21. Enhancing mechanical and biomedical properties of protheses - surface and material design10.1016/j.surfin.2021.101498 ↗
22. Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications10.1016/j.jma.2019.12.002 ↗
23. Implementation of robust Taguchi approach on mechanical and metallurgical characterization of Al7075 (T6)-SiC-MoS2 based hybrid metal matrix composite10.1016/j.matpr.2021.09.494 ↗
24. Investigation of Al-Mg based composite incorporated with MoS2 through powder metallurgy10.1177/0954408920985761 ↗
25. Additive manufacturing of graphene reinforced 316L stainless steel composites with tailored microstructure and mechanical properties10.1016/j.matchemphys.2023.127826 ↗
26. Role of scan parameters on mechanical and wear properties of additively manufactured graphene-reinforced austenitic stainless steel 316L composites10.1016/j.matchemphys.2024.129309 ↗
27. Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting10.1016/j.triboint.2020.106525 ↗
28. Microstructural and mechanical properties evaluation of graphene reinforced stainless steel composite produced via selective laser melting10.1016/j.msea.2020.138936 ↗
29. A facile and cost-effective approach to fabricate in-situ synthesized graphene nanosheet reinforced 316L stainless steel10.1007/s11837-020-04440-w ↗
30. Investigation of structural, mechanical, and corrosion properties of steel 316L reinforcement by hBN and TiC particles10.1088/2053-1591/ac6d4a ↗
31. Multilayer-graphene reinforced 316L matrix composites preparation by laser deposited additive manufacturing: microstructure and mechanical property analysis10.1088/2053-1591/ab2f2e ↗
32. Enhanced mechanical and tribological performance of additively manufactured 316L steel by MoS2-reinforcement10.1016/j.matdes.2024.113562 ↗
33. Perspectives of 2D MXene tribology
34. Unveiling the tribological potential of MXenes-current understanding and future perspectives10.1016/j.cis.2023.103021 ↗
35. 2D MXenes: tunable mechanical and tribological properties
36. Combining surface textures and MXene coatings—towards enhanced wear-resistance and durability
37. Layered 2D nanomaterials to tailor friction and wear in machine elements—a review
38. Ti3C2T solid lubricant coatings in rolling bearings with remarkable performance beyond state-of-the-art materials
39. Recent progress on wear‐resistant materials: designs, properties, and applications
40. Potential biosafety of Mxenes: stability, biodegradability, toxicity and biocompatibility
41. MXenes and MXene-based materials for tissue engineering and regenerative medicine: recent advances10.1039/D1MA00189B ↗
42. Evaluation of the wear-resistance of DLC-coated hard-on-soft pairings for biomedical applications10.1016/j.wear.2023.204728 ↗
43. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
44. Prospects of MXene and graphene for energy storage and conversion10.1016/j.rser.2023.114030 ↗
45. Synthesis, characterization and antifungal property of Ti3C2Tx MXene nanosheets10.1016/j.ceramint.2020.05.118 ↗
46. Critical review of LPBF metal print defects detection: roles of selective sensing technology10.3390/app14156718 ↗
47. Multi-layer Ti3C2Tx-nanoparticles (MXenes) as solid lubricants – role of surface terminations and intercalated water10.1016/j.apsusc.2019.07.171 ↗
48. Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – a review10.1016/j.triboint.2020.106792 ↗
49. The rise of Ti3C2Tx MXene synthesis strategies over the decades: a review10.1016/j.flatc.2024.100734 ↗
50. Effect of morphology and structure of MXene Ti3C2Tx on mechanical, thermal properties of PEEK nanocomposite10.1016/j.carbon.2024.119436 ↗
51. High-performance copper-matrix materials reinforced by nail board-like structure 2D Ti3C2T MXene with in-situ TiO2 particles10.1016/j.msea.2021.142392 ↗
52. Comparative analysis of the solid lubrication performance - Ti3AlC2 versus Ti3C2T coatings10.1016/j.ceramint.2024.04.314 ↗
53. Effect of roughness and acidic medium on wear behavior of dental resin composite10.1186/s12903-022-02516-4 ↗
54. Materials for joint replacement
55. Contact mechanics of rough surfaces in tribology: multiple asperity contact10.1023/A:1019186601445 ↗
56. Investigation of friction mechanisms in finger pad sliding against surfaces of varying roughness10.1016/j.biotri.2015.09.002 ↗
57. Effects of surface composite structure with micro-grooves and Sn-Ag-Cu on reducing friction and wear of Ni3Al alloys10.1016/j.surfcoat.2020.125540 ↗
58. Materials for hip prostheses: a review of wear and loading considerations10.3390/ma12030495 ↗
59. Ti3C2Tx MXenes – an effective and long-storable oil lubricant additive10.1016/j.triboint.2023.108273 ↗
60. Impact of tribofilm on the anti-wear and friction-reduction properties of interfaces10.1088/1402-4896/ad5fc8 ↗
61. Ti3C2T and Mo2TiC2T MXenes as additives in synovial fluids - towards an enhanced biotribological performance of 3D-printed implants
62. Emerging 2D nanomaterials‐integrated hydrogels: advancements in designing theragenerative materials for bone regeneration and disease therapy
63. Surface passivation by graphene in the lubrication of iron: a comparison with bronze10.1016/j.carbon.2017.02.011 ↗
64. Amorphous carbon coatings for total knee replacements—part II: tribological behavior10.3390/polym13111880 ↗
65. Effect of gear surface and lubricant interaction on mild wear10.1007/s11249-012-0004-y ↗
66. Tribological properties of Ti3C2Tx MXene reinforced interpenetrating polymers network coating10.1016/j.triboint.2021.107196 ↗
67. Friction and wear of polymer-based composites10.1007/BF02254659 ↗
68. Exploring the lubrication mechanisms of synovial fluids for joint longevity – a perspective10.1016/j.colsurfb.2021.111926 ↗
69. Synergistic enhancement of the friction and wear performance for UHMWPE composites under different aging times10.3390/polym16142059 ↗
70. Friction and wear of polymer and polymer
71. Zhang · 2014 · 19
72. 2014
73. Surface texturing for friction control: a review on existing technology and prospects10.2474/trol.19.105 ↗
74. Achieving the ultra-low friction and wear rate of PEEK-PTFE composites by Ti3C2Tx MXene reinforcement10.1016/j.triboint.2024.110030 ↗
75. Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel10.1016/S0043-1648(02)00230-2 ↗
76. Defects in metal additive manufacturing processes10.1007/s11665-021-05919-6 ↗
77. The mechanism of sample composition variation in the selective laser melting process based on the laser-induced breakdown spectroscopy and Raman system detection10.1039/D3JA00293D ↗
78. Tribofilm formation during dry sliding of graphite- and MoS2- based composites obtained by spark plasma sintering10.1016/j.triboint.2021.107035 ↗
79. Oxygen defects induced tailored optical and magnetic properties of FexCr2−xO3 (0 ≤ x ≤ 0.1) nanoparticles10.1007/s00339-021-05233-x ↗
80. Raman investigation of nanosized TiO2 : effect of crystallite size and quantum confinement10.1021/jp2122196 ↗
81. Solid lubrication performance of sandwich Ti3C2Tx-MoS2 composite coatings10.1016/j.apsusc.2023.158295 ↗