Morphological evolution and burning behavior of oxide coating fabricated on aluminum immersed in etidronic acid at high current density
Source abstract
Abstract
Abstract Micro arcs on metal surface immersed in alkaline electrolyte have been studied by many works, but that in acidic electrolyte are rarely reported. In this work, anodizing of aluminum was carried out in etidronic acid (HEDP) at high current density to investigate the formation behavior of coating. SEM images indicate that the burning of initial film is actually caused by local oxide cracking due to the increase of compressive stress. The soft spark would appear when voltage reached 300 V, then change to the micro arcs at 400 V, and finally manufacture the outer micro-arc oxide (MAO) layer. Hereafter, the automatic extinguishing of micro arcs gives rise to the formation of inner anodic aluminum oxide (AAO) layer. Moreover, it is evidenced that plasma discharge has few contributions to coating thickening. The barrier layer provides the raw materials for the growth of outer MAO layer. Based on these results, the growth behavior of coating processed in HEDP at high current density is proposed and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Effect of anodizing parameters on film morphology and corrosion resistance of AA2099 aluminum-lithium alloy10.1149/2.1081607jes ↗
2. Advanced hard anodic alumina coatings via etidronic acid anodizing10.1016/j.surfcoat.2017.07.043 ↗
3. Mechanical properties of barrier-type anodic alumina films using nanoindentation10.1016/S0257-8972(03)00738-2 ↗
4. Molecular self-assembly of one-dimensional polymer nanostructures in nanopores of anodic alumina oxide templates10.1016/j.progpolymsci.2017.10.004 ↗
5. Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures10.1021/cr500002z ↗
6. Influence of surface micro grooving pretreatment on MAO process of aluminum alloy10.1016/j.apsusc.2016.08.088 ↗
7. Improvement of corrosion and tribocorrosion behavior of pure titanium by subzero anodic spark oxidation10.1021/acsami.8b02331 ↗
8. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
9. High growth rate, wear resistant coatings on an Al–Cu–Li alloy by plasma electrolytic oxidation in concentrated aluminate electrolytes10.1016/j.surfcoat.2014.12.078 ↗
10. Microstructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti–6Al–4V alloy in silicate-hexametaphosphate electrolyte10.1016/j.surfcoat.2012.12.003 ↗
11. Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications10.1016/j.surfcoat.2006.06.050 ↗
12. A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings10.1016/j.wear.2006.02.002 ↗
13. Microstructure and multi-scale mechanical behavior of hard anodized and plasma electrolytic oxidation (PEO) coatings on aluminum alloy 505210.1016/j.surfcoat.2012.07.056 ↗
14. A mechanism for the growth of a plasma electrolytic oxide coating on Al10.1016/j.electacta.2016.04.186 ↗
15. Spontaneous current oscillations during hard anodization of aluminum under potentiostatic conditions10.1002/adfm.200901213 ↗
16. Exploration for the self-ordering of porous alumina fabricated via anodizing in etidronic acid10.1016/j.electacta.2016.06.071 ↗
17. Local burning phenomena in sulfuric acid anodizing: analysis of porous anodic alumina layers on AA105010.1149/1.3478482 ↗
18. Investigations of burning phenomena during the hard anodising of aluminium by local in-operando temperature measurements10.1016/j.electacta.2017.07.167 ↗
19. Effect of low levels of sulphate on the current density and film morphology during anodizing of aluminium in chromic acid10.1016/j.electacta.2016.01.230 ↗
20. Influence of fluorozirconic acid on sulfuric acid anodizing of aluminum10.1149/2.1561713jes ↗
21. Self-ordering regimes of porous anodic alumina layers formed in highly diluted sulfuric acid electrolytes10.1021/acs.jpcc.5b11801 ↗
22. A new self-ordering regime for fast production of long-range ordered porous anodic aluminum oxide films10.1016/j.electacta.2015.07.119 ↗
23. Morphology evolution of porous anodic alumina in mixed H3PO4/NH4F electrolytes10.1016/j.surfcoat.2017.12.012 ↗
24. Fabrication and growth model for conical alumina nanopores – evidence against field-assisted dissolution theory10.1016/j.elecom.2018.05.029 ↗
25. A theory for breakdown of anodic oxide films on metals10.1016/0013-4686(71)85079-X ↗
26. Preparation and properties of titanium oxide film on NiTi alloy by micro-arc oxidation10.1016/j.apsusc.2011.01.047 ↗
27. Key factors determining the development of two morphologies of plasma electrolytic coatings on an Al–Cu–Li alloy in aluminate electrolytes10.1016/j.surfcoat.2016.02.054 ↗
28. Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior10.1016/j.surfcoat.2013.03.041 ↗
29. Effects of electrical parameters on plasma electrolytic oxidation of aluminium10.1016/j.surfcoat.2013.01.029 ↗
30. Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: effect of current density and electrolyte concentration10.1016/j.surfcoat.2010.04.052 ↗
31. Applying high voltage cathodic pulse with various pulse durations on aluminium via micro-arc oxidation (MAO)10.1016/j.surfcoat.2018.04.085 ↗
32. Plasma formation mechanism of microarc oxidation10.1016/j.electacta.2014.01.047 ↗
33. Discharge characterization in plasma electrolytic oxidation of aluminium10.1088/0022-3727/36/17/314 ↗
34. An investigation of the coating/substrate interface of plasma electrolytic oxidation coated aluminum10.1016/j.surfcoat.2015.08.050 ↗
35. Micro-structures and growth mechanisms of plasma electrolytic oxidation coatings on aluminium at different current densities10.1016/j.surfcoat.2017.04.064 ↗
36. Nature of the growth of plasma electrolyte oxidation coating on aluminum
37. A hard coating with MAO/AAO double layers prepared on aluminum in etidronic acid by DC oxidation10.1016/j.surfcoat.2019.01.021 ↗
38. Pilling-Bedworth ratio for oxidation of alloys10.1007/s100190050008 ↗
39. Influence of oxidation heat on hard anodic film of aluminum alloy10.1016/S1003-6326(11)61521-5 ↗
40. The study of the volume expansion of aluminum during porous oxide formation at galvanostatic regime10.1016/j.apsusc.2003.08.014 ↗
41. Volume expansion factor and growth efficiency of anodic alumina formed in sulphuric acid10.1149/1.3578028 ↗
42. The effects of anion deposition and negative pulse on the behaviours of plasma electrolytic oxidation (PEO)—a systematic study of the PEO of a Zirlo alloy in aluminate electrolytes10.1016/j.electacta.2016.12.115 ↗
43. Plasma electrolytic oxidation of AZ31 magnesium alloy in aluminate-tungstate electrolytes and the coating formation mechanism10.1016/j.jallcom.2017.07.117 ↗
44. New findings on properties of plasma electrolytic oxidation coatings from study of an Al–Cu–Li alloy10.1016/j.electacta.2013.06.022 ↗
45. Theoretical derivation of anodizing current and comparison between fitted curves and measured curves under different conditions10.1088/0957-4484/26/14/145603 ↗
46. Electronic currents and the formation of nanopores in porous anodic alumina10.1088/0957-4484/20/47/475303 ↗
47. Anodic growth of titanium oxide: electrochemical behaviour and morphological evolution10.1016/j.electacta.2012.04.114 ↗
48. A theory of avalanche breakdown during anodic oxidation10.1016/0013-4686(87)85032-6 ↗
49. Large-scale fabrication of ordered nanoporous alumina films with arbitrary pore intervals by critical-potential anodization10.1149/1.2218822 ↗
50. Influence of temperature and time on the fabrication of self-ordering porous alumina by anodizing in etidronic acid10.1016/j.apsusc.2018.05.081 ↗
51. Fabrication of self-ordered porous alumina via etidronic acid anodizing and structural color generation from submicrometer-scale dimple array10.1016/j.electacta.2014.12.171 ↗
52. Electrode temperature evolution during anodic oxidation of AlSi(Cu) alloys studied in the wall-jet reactor10.1016/j.surfcoat.2005.06.009 ↗