journal article·2018-12-19Open access

ALKALI-SILICA REACTIVITY OF PORTLAND-COMPOSITE CEMENTS AND GRAVEL AGGREGATES

Jadvyga Zvironaite

Abstract

The potential alkali-silica reactivity (ASR) of various combinations of Portland-composite cements CEM II/A, and Lithuanian aggregates from three gravel deposits are investigated in this work. These aggregates which contain about (2 -4 %) reactive siliceous rocks (mostly rapid reacting opal and slower reacting flint) could possibly be assigned to Class II-S (potentially alkali-reactive). Two indicators were used to assess the effectiveness of the supplementary cementing materials (SCMs)slag (S), fly ash (FA) and burnt shale, which are present up to 20 % in the cement: the expansion of the mortar specimens in a hot alkali solution and the intensity of the ASR-caused surface damage in the warm humid environment (60 C and 100 % RH). The presence of S (~15 %) and FA (10 %, 15 %, 20 %) in the cements decreases the expansion, but no mitigating effect (in the case of S) or even a stimulating effect (in the case of 10 % and 15 % FA) was observed for the ASR-caused surface damage, the effect only occurred in the case of the threshold content (20 %) of FA in the cement. The stimulating effect of burnt shale (~ 18 %) was observed on both the expansion and surface damage. A strong linear correlation (R = 0.95) between the changes in the flexural strength and expansion was observed in the 28-day specimens when tested according to AAR-2.2.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. 10.1016/j.cemconres.2011.10.00410.1016/j.cemconres.2011.10.004 ↗
2. 10.1016/j.cemconcomp.2005.03.00510.1016/j.cemconcomp.2005.03.005 ↗
3. 10.1617/s11527-014-0465-610.1617/s11527-014-0465-6 ↗
4. 10.1016/j.cemconres.2015.05.02410.1016/j.cemconres.2015.05.024 ↗
5. 10.1016/j.cemconres.2009.09.00410.1016/j.cemconres.2009.09.004 ↗
6. 10.1080/13921525.1996.1053165510.1080/13921525.1996.10531655 ↗
7. 10.1016/j.proeng.2017.02.16010.1016/j.proeng.2017.02.160 ↗
8. 10.1016/j.cemconres.2010.11.00310.1016/j.cemconres.2010.11.003 ↗
9. 10.1016/j.cemconres.2009.08.00910.1016/j.cemconres.2009.08.009 ↗
10. 10.1016/j.cemconres.2007.06.00810.1016/j.cemconres.2007.06.008 ↗
11. 10.1016/j.conbuildmat.2010.11.08710.1016/j.conbuildmat.2010.11.087 ↗
12. 10.1016/S0008-8846(01)00538-510.1016/S0008-8846(01)00538-5 ↗
13. 10.1016/j.cemconcomp.2013.06.00910.1016/j.cemconcomp.2013.06.009 ↗
14. 10.1080/1557877090315278110.1080/15578770903152781 ↗
15. 10.1016/j.cemconcomp.2012.11.00410.1016/j.cemconcomp.2012.11.004 ↗
16. 10.1016/j.cemconres.2014.01.00110.1016/j.cemconres.2014.01.001 ↗
17. 10.1080/13923730.2007.963643810.1080/13923730.2007.9636438 ↗
18. 10.3176/oil.2011.4.0410.3176/oil.2011.4.04 ↗
19. 10.3176/oil.2014.2.0510.3176/oil.2014.2.05 ↗
20. 10.1016/S0950-0618(02)00009-010.1016/S0950-0618(02)00009-0 ↗
21. 10.1016/j.conbuildmat.2013.04.04610.1016/j.conbuildmat.2013.04.046 ↗
22. 10.1007/BF0247969710.1007/BF02479697 ↗