journal article·2004-10

Physical interpretation of impacts from a low-cost manufacturing process on the surface microstructure of a novel solar absorber

P. Konttinen, P.D. Lund

Publisher page

Abstract

Abstract A novel lower-cost mechanical solar absorber manufacturing method has been developed. C/Al 2 O 3 /Al surfaces have been characterized with optical and microstructural methods. The surface consists of thin inhomogeneous matrix containing carbon and Al 2 O 3 on Al-substrate. Manufacturing of the surface can be done by single phase manual or mechanical grinding with a silicon carbide grinding pad. A solar absorptance α =0.90 and a thermal emittance e =0.22 have been achieved so far. Durability and aging mechanisms of the surface have been determined in laboratory and test field. The C/Al 2 O 3 /Al surface has passed accelerated aging tests recommended by IEA-SHC for high temperature and combined elevated temperature and condensation. The main degradation mechanism is hydration of aluminium oxide. The estimated service lifetime of the absorber (with an optical performance more than 95% of its initial) in normal use is in the range of 20–25 years, depending on the condensation frequency distribution on the surface. Computer simulations and solar collector testing at test field demonstrate some 5–17% lower annual energy yield compared to the commonly used collectors with nickel-pigmented and sputtered absorbers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Chemical and Physical Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Eisenhammer · Sol. Energy Mater. Sol. Cells · 1997 · 46 · 5310.1016/S0927-0248(96)00097-9 ↗
2. Wäckelgård · Sol. Energy Mater. Sol. Cells. · 1998 · 54 · 16510.1016/S0927-0248(98)00067-1 ↗
3. Farooq · Sol. Energy Mater. Sol. Cells · 2002 · 71 · 52310.1016/S0927-0248(01)00108-8 ↗
4. Orel · Sol. Energy Mater. Sol. Cells · 2001 · 68 · 33710.1016/S0927-0248(00)00367-6 ↗
5. Smith · Sol. Energy Mater. Sol. Cells. · 2003 · 79 · 16310.1016/S0927-0248(02)00409-9 ↗
6. Boström · Solar Energy · 2003 · 74 · 49710.1016/S0038-092X(03)00199-3 ↗
7. Konttinen · Thin Solid Films · 2003 · 425 · 2410.1016/S0040-6090(02)01141-0 ↗
8. Konttinen · Sol. Energy Mater. Sol. Cells · 2003 · 79 · 27310.1016/S0927-0248(02)00411-7 ↗
9. Botten · Opt. Commun. · 1977 · 23 · 42110.1016/0030-4018(77)90397-2 ↗
10. Golomb · Opt. Commun. · 1978 · 27 · 17710.1016/0030-4018(78)90360-7 ↗
11. Kudryashova · Appl. Solar Energy · 1969 · 5 · 24
12. P. Konttinen, P.D. Lund, World Renewable Energy Congress VII, Cologne, Germany, 29 June–5 July 2002.
13. P. Konttinen, P.D. Lund, Thermal stability and moisture resistance of C/Al2O3/Al solar absorber surfaces. Sol. Energy Mater. Sol. Cells 82 (2004) 361–373.10.1016/j.solmat.2003.12.006 ↗
14. Brunold · Sol. Energy · 2000 · 68 · 31310.1016/S0038-092X(00)00034-7 ↗
15. Carlsson · Sol. Energy Mater. Sol. Cells · 2000 · 61 · 25510.1016/S0927-0248(99)00111-7 ↗
16. Köhl · Renewable Energy · 2001 · 24 · 59710.1016/S0960-1481(01)00046-5 ↗
17. B. Carlsson, U. Frei, M. Köhl, K. Möller, Accelerated Life Testing of Solar Energy Materials—Case Study of Some Selective Materials for DHW-Systems, IEA SHCP Task X, 1994.
18. Carlsson · Sol. Energy Mater. Sol. Cells · 2000 · 61 · 22310.1016/S0927-0248(99)00112-9 ↗
19. P. Konttinen, accelerated aging and optical characterization of absorber surfaces for solar collectors, Lic.Sc. Thesis, Department of Engineering Physics and Mathematics, Helsinki University of Technology, Finland, 2000. Available at http://www.hut.fi/units/AES/studies/theses/konttine.pdf
20. Tesfamichael · Sol. Energy Mater. Sol. Cells · 1998 · 54 · 21310.1016/S0927-0248(98)00073-7 ↗
21. Nostell · Thin Solid Films · 1999 · 351 · 17010.1016/S0040-6090(99)00257-6 ↗
22. Gombert · Solar Energy · 2000 · 68 · 35710.1016/S0038-092X(00)00022-0 ↗