journal article·2021-10Open access

Trapezoidal grid fingers to reduce shadowing loss and improve short circuit current

Alessandro Cavalli, Jeronimo Buencuerpo, Mark Steger, Emmett E. Perl, Myles A. Steiner, John F. Geisz

Abstract

Abstract Traditional metallic contacts on solar cells can cover a substantial portion of the device area, resulting in shadowing of light that diminishes the amount of current collected. In this paper, we developed trapezoidal electron-beam evaporated Ti/Al front grid fingers on GaAs single-junction solar cells to decrease the optical shadowing and increase the photogenerated current. We observe a high fill factor of 87% at 1-Sun light intensity and we observe no degradation on the open-circuit voltage. The short-circuit current density is found to increase by 0.4 mA/cm2 when compared to previously demonstrated electroplated Ni/Au front grid fingers, resulting in an efficiency improvement of ~0.8% absolute.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Terawatt-scale photovoltaics: trajectories and challenges10.1126/science.aal1288 ↗
2. Fraunhofer · 2019
3. Solar cell efficiency tables (Version 53)10.1002/pip.3102 ↗
4. Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
5. Optimizing solar cell performance by simultaneous consideration of grid pattern design and interconnect configuration
6. Reducing shadowing losses in silicon solar cells using cellulose nanocrystal: polymer hybrid diffusers10.1364/AO.58.002505 ↗
7. Flexible GaAs solar cells on roll-to-roll processed epitaxial Ge films on metal foils: a route towards low-cost and high-performance III–V photovoltaics10.1039/C8EE02553C ↗
8. The circle-grid electrode on concentrated GaAs solar cells efficiency
9. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
10. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
11. Transparent conducting silver nanowire networks10.1021/nl301045a ↗
12. High transmission nanowire contact arrays with subwavelength spacing10.1002/pssr.201510367 ↗
13. Cloaking of solar cell contacts at the onset of Rayleigh scattering10.1038/srep28669 ↗
14. Effectively transparent front contacts for optoelectronic devices10.1002/adom.201600252 ↗
15. The illumination angle dependency of CPV solar cell electrical performance10.1016/j.solener.2017.01.026 ↗
16. Transparent metallic fractal electrodes for semiconductor devices10.1021/nl501738b ↗
17. Saive · 2017
18. Visual appearance of microcontacts for solar windows10.1117/1.JPE.9.027001 ↗
19. A computationally efficient simulation method for optimizing front contacts of concentrator multijunction solar cells
20. Transparent electrodes for efficient optoelectronics10.1002/aelm.201600529 ↗
21. Interdigitated front contact solar cells fabricated by CMOS process technologies
22. Srinivasa · 2015
23. Feynman
24. Al-based front contacts for HCPV solar cell10.1063/1.5001426 ↗
25. Duda · 2012
26. High aspect ratio electrodeposited Ni/Au contacts for GaAs-based III-V concentrator solar cells10.1002/pip.2490 ↗
27. Photoresist AZ nLof 2070 Photoresists MicroChemicals GmbH, n.D.
28. Light beam induced current mapping applied to the characterization of tandem and polycrystalline GaAs devices