journal article·2001-02

Characterization of pulsed laser crystallization of silicon thin film

S Ishigame, K Ozaki, T Sameshima, S Higashi

Publisher page

Abstract

Abstract Increases in the melt duration of silicon films were achieved by electrical current heating during and after pulsed excimer laser heating. When 50 nm thick amorphous silicon films formed on glass substrate were irradiated by 28-ns-pulsed excimer by applying 1.8 μs long pulsed-voltage at 100 V to the films, the silicon films were melted for the duration of the voltage pulse. The power threshold for heat energy for this long melting by the self-heating effect of the silicon films was 3.0×105 W/cm2. The high electrical conductivity of the silicon film (2.9×10−2 S/cm) was found after regrowth of the silicon using a laser energy density of 360 mJ/cm2 and a pulsed voltage of 150 V. The advantages of the long melt duration for large crystalline growth are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Laser Material Processing Techniques · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (5)

Show source-provided references
1. Samesima · IEEE Electron Dev. · 1995 · 42 · 25110.1109/16.370072 ↗
2. Tsai · Thin Solid Films · 1994 · 429 · 22410.1016/0040-6090(94)90766-8 ↗
3. Samesima · Jpn. J. Appl. Phys. · 1988 · 27 · L193510.1143/JJAP.27.L1935 ↗
4. Nakamura · Jpn. J. Appl. phys. · 1994 · 34 · 44210.1143/JJAP.34.442 ↗
5. S. Higashi, Proceedings of the Workshop on Active Matrix Liquid Crystal Displays Tokyo, Japan, 1999, p. 225.