Polyhedral oligomeric silsesquioxanes as protective monolayer coatings against the high-temperature corrosion of concentrating solar power absorber surfaces
Source abstract
Abstract
Abstract The third generation of concentrating solar power (CSP) hybrid absorbers with enhanced solar absorptance and low thermal emittance (spectrally selective) is designed to have a high solar-to-thermal energy conversion efficiency, in spite of robust, long-term resistance to environmental loads. In this study, we report on the deposition, testing, and antioxidation properties of ultra-thin (1–3 nm) mono-, di-, and tri-layers of hybrid organic‒inorganic polyhedral oligomeric silsesquioxanes (POSS) on Inconel 617. The latter is a well-known metal alloy, which is used as a CSP absorber material. Ultra-thin POSS layers were prepared by Langmuir‒Blodgett (LB) deposition. After deposition, the detailed signature characteristics of the POSS monolayer were investigated using X-ray photoelectron spectroscopy (XPS), infrared reflection‒absorption spectroscopy (IRRAS), and contact angle measurements. The XPS results with element concentration profiles reveal that the LB method enables the formation of a dense ultra-thin POSS coating on the Inconel surface, which eventually improves the antioxidation properties. To further test the corrosion resistance improvement of the developed coatings, electrochemical impedance spectroscopy (EIS) and potentiodynamic tests were performed in 0.5 M NaCl solution. The as-obtained data were fitted with the corresponding equivalent circuit, which shows an increased charge transfer resistance (Rct) for coated samples. Tafel polarization plots show suppressed cathodic and anodic reaction rates for samples coated with ultra-thin POSS coatings. We envision that such coatings will have significant potential as a primer for spectrally selective absorber coatings for CSP technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · solar cell performance optimization · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
2. Ceramic–metal composites for heat exchangers in concentrated solar power plants10.1038/s41586-018-0593-1 ↗
3. Concentrating on solar electricity and fuels10.1126/science.1191137 ↗
4. 2018 · vol. 2018
5. 2018
6. Towler · 2014 · 161
7. Maximizing concentrated solar power (CSP) plant overall efficiencies by using spectral selective absorbers at optimal operation temperatures10.1016/j.solener.2015.07.023 ↗
8. Solution combustion of spinel CuMn2O4 ceramic pigments for thickness sensitive spectrally selective (TSSS) paint coatings10.1016/j.ceramint.2016.04.122 ↗
9. Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers10.1016/j.solmat.2011.05.014 ↗
10. Polyhedral oligomeric silsesquioxane trisilanols as pigment surface modifiers for fluoropolymer based Thickness Sensitive Spectrally Selective (TSSS) paint coatings10.1016/j.solmat.2010.08.005 ↗
11. Antireflection treatment of Thickness Sensitive Spectrally Selective (TSSS) paints for thermal solar absorbers10.1016/j.solener.2009.10.016 ↗
12. High-solar-absorptance CSP coating characterization and reliability testing with isothermal and cyclic loads for service-life prediction10.1039/C8EE03536A ↗
13. Hartmann-Thompson · 2011
14. E. Hoque, J.A. DeRose, P. Hoffmann, H.J. Mathieu, Robust perfluorosilanized copper surfaces, Surf. Interface Anal. 38 (n.d.) 62–68. doi:10.1002/sia.2179.10.1002/sia.2179 ↗
15. Super-hydrophobic surfaces improve corrosion resistance of copper in seawater10.1016/j.electacta.2006.10.059 ↗
16. D.G. Shchukin, M. Zheludkevich, K. Yasakau, S. Lamaka, M.G.S. Ferreira, H. Möhwald, Layer-by-Layer assembled nanocontainers for self-healing corrosion protection, Adv. Mater. 18 (n.d.) 1672–1678. doi:10.1002/adma.200502053.10.1002/adma.200502053 ↗
17. F. Zhang, L. Zhao, H. Chen, S. Xu, D.G. Evans, X. Duan, Corrosion resistance of superhydrophobic layered double hydroxide films on aluminum, Angew. Chem. Int. Ed. 47 (n.d.) 2466–2469. doi:10.1002/anie.200704694.10.1002/anie.200704694 ↗
18. Tarnish protection of silver using a hexadecanethiol self-assembled monolayer and descriptions of accelerated tarnish tests10.5006/1.3281678 ↗
19. Self-assembled monolayers on engineering metals: structure, derivatization, and utility10.1021/la981694g ↗
20. Formation of self-assembled monolayers of alkylphosphonic acid on the native oxide surface of SS316L10.1021/la060636p ↗
21. Langmuir-Blodgett films10.1126/science.8134836 ↗
22. Photoisomerizable guanosine derivative as a probe for DNA base-pairing in Langmuir monolayers10.1021/acs.langmuir.9b00429 ↗
23. Ion-specific self-assembly of a lipophilic guanosine derivative in thin surface films10.1021/acs.langmuir.5b00768 ↗
24. Molecular recognition of a lipophilic guanosine derivative in Langmuir films at the air-water interface10.1016/j.bbagen.2016.11.038 ↗
25. Layer-by-layer assembly as a versatile bottom-up nanofabrication technique for exploratory research and realistic application10.1039/b700410a ↗
26. Lanthanide-Based luminescent hybrid materials10.1021/cr8003983 ↗
27. Highly conducting graphene sheets and Langmuir–Blodgett films10.1038/nnano.2008.210 ↗
28. U.S. Program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
29. Fabrication of densely packed titania nanosheet films on solid surface by use of Langmuir−Blodgett deposition method without amphiphilic additives10.1021/la050293f ↗
30. Assembly, structural characterization, and thermal behavior of layer-by-layer deposited ultrathin films of poly(vinyl sulfate) and poly(allylamine)10.1021/la00026a020 ↗
31. Large-scale hierarchical organization of nanowire arrays for integrated nanosystems10.1021/nl0345062 ↗
32. Self-assembled nanostructured materials10.1021/cm960116n ↗
33. Symmetrical thiol functionalized polyhedral oligomeric silsesquioxanes as building blocks for LB films10.1039/c1sm05443k ↗
34. Langmuir and Langmuir–blodgett films of unsymmetrical and fully condensed polyhedral oligomeric silsesquioxanes (POSS)10.1021/acs.jpcc.5b08090 ↗
35. Unique rodlike surface morphologies in trisilanolcyclohexyl polyhedral oligomeric silsesquioxane films10.1021/la035992b ↗
36. Polyhedral oligomeric silsesquioxane Amphiphiles: isotherm and brewster angle microscopy studies of trisilanolisobutyl-POSS at the air/water interface10.1021/la035240h ↗
37. Effects of hydrogen bonding on the monolayer properties of amphiphilic double-decker-shaped polyhedral silsesquioxanes10.1021/la200604w ↗
38. Comparative study of Langmuir- and Langmuir-Blodgett layers of amphiphilic carboxylic- and hydroxamic acids10.1016/j.colsurfa.2008.02.046 ↗
39. Inhibition of corrosion by poly(N-hexadecylaniline)/docosanol mixed Langmuir-Blodgett films on copper in sea water10.1016/j.matchemphys.2005.07.060 ↗
40. Langmuir-Blodgett films of dococyltriethylammonium bromide and octadecanol on iron. Deposition and corrosion inhibitor performance in CO2 containing brine10.1016/j.corsci.2005.07.013 ↗
41. Inhibition of corrosion by hexadecyl trimethyl ammonium bromide Langmuir-Blodgett monolayers on carbon steel10.1016/0040-6090(93)04094-9 ↗
42. Integrated circuits protection with the Langmuir-Blodgett Films
43. Langmuir-Blodgett films of salophen-based metallosurfactants as surface pretreatment coatings for corrosion mitigation10.1039/C6CC04563D ↗
44. John · 1995
45. Roberts · 2013
46. Petty · 2004
47. Ulman · 2013
48. Polyhedral oligomeric silsesquioxane amphiphiles: isotherm and brewster angle microscopy studies of trisilanolisobutyl-POSS at the air/water interface10.1021/la035240h ↗
49. Unique rodlike surface morphologies in trisilanolcyclohexyl polyhedral oligomeric silsesquioxane films10.1021/la035992b ↗
50. Blends of amphiphilic trisilanolisobutyl-POSS and phosphine oxide substituted poly(dimethylsiloxane) at the air/water interface10.1021/la0475674 ↗
51. Polyhedral oligomeric Silsesquioxanes: A new class of amphiphiles at the air/water interface10.1021/ja027860v ↗
52. Langmuir-blodgett films
53. Silane layers on silicon surfaces: mechanism of interaction, stability, and influence on protein adsorption10.1021/la2036778 ↗
54. Attenuated total reflection spectroscopy for infrared analysis of thin layers on a semiconductor substrate10.1063/1.1464231 ↗
55. The defect structure of sol–gel-derived silica/polytetrahydrofuran hybrid films by FTIR10.1016/S0022-3093(01)00418-5 ↗
56. Law · 2016
57. Use of the combined Lifshitz-van der Waals and Lewis acid-base approaches in determining the apolar and polar contributions to surface and interfacial tensions and free energies10.1163/156856102760099870 ↗
58. Tiginyanu · 2016
59. Eis and XPS study of surface modification of 316LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
60. The importance of phase purity in Ni–BaZr0.85Y0.15O3−δ cermet anodes – novel nitrate-free combustion route and electrochemical study10.1039/C2RA22301E ↗
61. Active corrosion protection performance of an epoxy coating applied on the mild steel modified with an eco-friendly sol-gel film impregnated with green corrosion inhibitor loaded nanocontainers10.1016/j.apsusc.2018.01.185 ↗
62. Corrosion of aluminum, copper, brass and stainless steel 304 in tequila10.1016/S1452-3981(23)17961-2 ↗
63. Electrochemical and corrosion behavior of cast re-containing inconel 718 alloys in sulphuric acid solutions and the effect of Cl-10.1016/S1452-3981(23)08171-3 ↗
64. Corrosion inhibition of copper by 2,5-dimercapto-1,3,4-thiadiazole monolayer in acidic solution10.1016/j.corsci.2010.12.002 ↗