Molecule co-fracture of organics in waste solar cells under different heating rates and the products analysis
Source abstract
Abstract
Abstract As a new kind of electronic waste, waste solar cells have posed a great threat to the environment. Solar cells contain a mass of hazardous organic components, such as ethylene-vinyl acetate copolymer and polyethylene glycol terephthalate. The degradation of ethylene-vinyl acetate copolymer and polyethylene glycol terephthalate may produce toxic substances to the environment. This paper proposed molecule co-fracture to dispose the organics in order to judge the hazard of degradation products to the environment. Co-fracture kinetics analysis showed that the heating rate with highest co-fracture efficient was 30 °C/min, at which the activation energy E had the largest value of 68.84 kJ/mol. The co-fracture products under different heating rates were tested. The main product was 1-hexadecanol, 2-methyl-, which had the highest yield of 44.66 wt % at the heating rate of 25 °C/min. Diisobutyl phthalate was the main hazardous product, which had highest yield was 9.75 wt % at the heating rate of 5 °C/min. Only at the heating rate of 30 °C/min, no hazardous substance was produced. Different energy supply in the system was the main reason for the different products. Molecule co-fracture was employed in this study to dispose organics in waste solar cells, which provides guidance for the disposal of waste solar cells to avoid environmental pollution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Photovoltaic Systems and Sustainability · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Meeting the clean energy Demand: nanostructure architectures for solar energy conversion10.1021/jp066952u ↗
2. Correction for Lewis and Nocera, Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0710683104 ↗
3. Toward cost-effective solar energy use10.1126/science.1137014 ↗
4. Polymer tandem photovoltaic cells with molecularly intimate interfaces achieved by a thin-film transfer technique10.1016/j.solmat.2012.05.025 ↗
5. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. Solar power wires based on organic photovoltaic materials10.1126/science.1168539 ↗
7. China photovoltaic industry development status and prospects
8. Producer responsibility and recycling solar photovoltaic modules10.1016/j.enpol.2010.07.023 ↗
9. Recovery processing status of waste crystalline silicon solar cell
10. A novel approach for recycling of kerf loss silicon from cutting slurry waste for solar cell applications10.1016/j.jcrysgro.2008.04.031 ↗
11. Efficient decommissioning and recycling of polymer solar cells: justification for use of silver10.1039/C3EE43746A ↗
12. Sustainable system for raw-metal recovery from crystalline silicon solar panels: from noble-metal extraction to lead removal10.1021/acssuschemeng.6b00894 ↗
13. Effect of plasticizer on physical properties of poly (vinyl acetate-co-ethylene) emulsion
14. Current status: production of high efficiency monocrystalline silicon solar cell10.1016/0960-1481(95)00026-G ↗
15. Global status of recycling waste solar panels: a review10.1016/j.wasman.2018.01.036 ↗
16. Experimental investigations for recycling of silicon and glass from waste photovoltaic modules10.1016/j.renene.2012.04.030 ↗
17. Recycling silicon solar cell waste in cement-based systems10.1016/j.solmat.2011.01.033 ↗
18. Experimental validation of crystalline silicon solar cells recycling by thermal and chemical methods10.1016/j.solmat.2010.07.025 ↗
19. Directional concentration of bromine from nonmetallic particles of crushed waste printed circuit boards by vacuum-gasification-condensation10.1016/j.jclepro.2019.05.169 ↗
20. Vacuum pyrolysis method for reclamation of rare earth elements from hyperaccumulator Dicranopteris dichotoma grown in contaminated soil10.1016/j.jclepro.2019.05.031 ↗
21. Controlling measures of micro-plastic and nano pollutants: a short review of disposing waste toners10.1016/j.envint.2018.05.038 ↗
22. Recovery of valuable materials from waste tantalum capacitors by vacuum pyrolysis combined with mechanical–physical separation10.1021/acssuschemeng.6b02988 ↗
23. Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards10.1016/j.jhazmat.2009.12.078 ↗
24. Vacuum-gasification-condensation of waste toner to produce industrial chemicals and nanomaterials10.1021/acssuschemeng.7b00328 ↗
25. Recovering full metallic resources from waste printed circuit boards: a refined review
26. A cleaner and energy-saving technology of vacuum step-by-step reduction for recovering cobalt and nickel from spent lithium-ion batteries10.1016/j.jclepro.2019.05.049 ↗
27. Pyrolysis routine of organics and parameter optimization of vacuum gasification for recovering hazardous waste toner10.1021/acssuschemeng.7b02024 ↗