journal article·2018-12

Voltage-matched thin film solar cells in 3-terminal configuration

R. Clemente de Lima, T. Merdzhanova, B. Turan, J. Kirchhoff, J. Hüpkes, C. Zahren, O. Astakhov

Publisher page

Abstract

Abstract Multijunction solar cells, proven technological route for achievements of highest PV conversion efficiencies, require accurate tuning of the sub-cell absorption to ensure that every cell in the stack delivers the same current density. Even though currents of the sub-cells can be precisely matched for a fixed illumination spectrum, current mismatch cannot be avoided in real terrestrial applications due to variations of the irradiance spectrum. The issue becomes critical when a solar cell has to cover wider range of applications such as a mixture of direct sun / shadow / artificial light – the case for various distributed PV-powered electronics. Furthermore the current matching constrains choice of materials and designs of sub-cells for a tandem device. A straightforward basic configuration with decoupling the sub-cell's currents is a 3-terminal configuration with one additional contact sheared by the top and bottom cell. This concept requires voltage-matching between the top and bottom cell when these cells are integrated in modules. A realistic concept for the voltage-matched 3-terminal cell reported recently includes a wide gap top cell combined with a tandem bottom cell made of 2 sub-cells with lower bandgaps. The concept is a hybrid between 2 and 3-terminal configurations with voltage matching and relaxed current matching constrains. Established thin film silicon solar cell technology provides interesting option to realize the hybrid 3-terminal cell with amorphous Si top cell (VOC ≈ 0.9 V) and two microcrystalline Si cells (VOC ≈ 0.5 V). In this work we present proof of concept of the voltage matched 3-terminal tandem cell prepared with highly transparent and conductive IOH intermediate contact. The efficiency of 10.4% has been achieved made up of independently operating 7.9% efficient top cell and 2.5% efficient bottom tandem cell. The paper summarizes the development and discusses optical losses identified in the 3-T devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Detailed balance limit of efficiency of P-N junction solar cells10.1063/1.1736034 ↗
2. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
3. Matching of silicon thin-film Tandem solar cells for maximum power output10.1155/2013/314097 ↗
4. Illumination intensity and spectrum-dependent performance of thin-film silicon single and multijunction solar cells10.1016/j.solmat.2016.09.039 ↗
5. Development towards cell-to-cell monolithic integration of a thin-film solar cell and lithium-ion accumulator10.1016/j.jpowsour.2016.07.073 ↗
6. Compatibility study towards monolithic self-charging power unit based on all-solid thin-film solar module and battery10.1016/j.jpowsour.2017.08.103 ↗
7. Series vs parallel connected organic tandem solar cells: cell performance and impact on the design and operation of functional modules10.1016/j.solmat.2014.07.047 ↗
8. A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells10.1038/ncomms8730 ↗
9. High-mobility hydrogen-doped In2O3 transparent conductive oxide for a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2008.09.047 ↗
10. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
11. High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells10.1016/j.tsf.2015.03.022 ↗
12. Reliability aspects of hydrogen-doped indium oxide10.1002/pssa.201532806 ↗
13. Study of thin-film silicon solar cell back reflectors and potential of detached reflectors10.1016/j.egypro.2011.10.161 ↗
14. The effect of front ZnO: Al surface texture and optical transparency on efficient light trapping in silicon thin-film solar cells10.1063/1.2715554 ↗
15. a-Si:H/μ c-Si:H tandem junction based photocathodes with high open-circuit voltage for efficient hydrogen production10.1557/jmr.2014.308 ↗
16. Optimization of front-contact laser scribing for thin-film silicon solar modules10.1016/j.solmat.2014.02.029 ↗
17. Novel interconnection scheme for thin-film silicon solar modules with conductive intermediate reflector10.1002/pssr.201409497 ↗
18. Hydrogen plasma interactions with tin oxide surfaces10.1016/0040-6090(84)90087-7 ↗
19. Improved homogeneity of microcrystalline absorber layer in thin-film silicon tandem solar cells10.1016/j.mseb.2008.10.050 ↗
20. Microcrystalline silicon oxide (μc-SiOx:H) alloys: a versatile material for application in thin film silicon single and tandem junction solar cells10.1016/j.jnoncrysol.2011.12.019 ↗
21. LPCVD ZnO-based intermediate reflector for micromorph tandem solar cells10.1016/j.solmat.2011.03.018 ↗
22. Analysis of parasitic losses due to intermediate reflectors in silicon tandem solar cells10.1016/j.solmat.2017.01.010 ↗
23. Microcrystalline silicon-oxygen alloys for application in silicon solar cells and modules10.1016/j.solmat.2013.05.053 ↗
24. Multijunction Si photocathodes with tunable photovoltages from 2.0 V to 2.8 V for light induced water splitting10.1039/C5EE02393A ↗