journal article·2015-12

Low-temperature preparation of a molybdenum oxide hole collection layer by using a peroxo precursor for polymer solar cells

Keisuke Hamada, Sunao Kamimura, Toshiki Tsubota, Naoya Murakami, Teruhisa Ohno

Publisher page

Abstract

Abstract Amorphous molybdenum oxide (MoO x ) as a hole collection layer (HCL) in polymer solar cells (PSCs) was prepared by annealing of a peroxo precursor. The power conversion efficiency of PSCs based on a blend of poly(3-hexylthiophene) and [6,6]-phenyl C 61 butyric acid methyl ester was improved to 3.19% by using an MoO x layer prepared by annealing at 200 °C in N 2 as an alternative for poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). X-ray photoelectron spectra of MoO x layers showed that the peroxide precursor was converted into MoO x by annealing at 100–150 °C and that annealing at a high temperature in N 2 under unaerated conditions promotes the reduction of Mo 6+ species into Mo 5+ species. In contrast, ultraviolet photoelectron spectra of an MoO x layer showed that the electric structure of MoO x depends on not the amount of Mo 5+ species but the presence or absence of Mo 5+ species. These results indicated that an appropriate amount of Mo 5+ species in the MoO x layer is important for an efficient MoO x HCL. A stability test revealed the PSCs with MoO x layers had relatively high device stability in air compared to that of PSCs with PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
2. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
3. A low-bandgap poly(2,7-Carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
4. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
5. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. Dithienogermole as a fused electron donor in bulk heterojunction solar cells10.1021/ja204056m ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Indene−C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
9. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
10. Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
13. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
14. Inverted polymer solar cells integrated with small molecular electron collection layer10.1016/j.orgel.2013.04.029 ↗
15. Utilizing n-type vanadium oxide films as hole-extracting layers for small molecule organic photovoltaics10.1063/1.3607478 ↗
16. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
17. High shunt resistance in polymer solar cells comprising a MoO3 hole extraction layer processed from nanoparticle suspension10.1063/1.3601921 ↗
18. Efficient organic photovoltaic cells using MoO3 hole-transporting layers prepared by simple spin-cast of its dispersion solution in methanol10.7567/JJAP.52.020202 ↗
19. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
20. Effect of ZnSe doping on the photochromic and thermochromic properties of MoO3 thin films10.1016/j.tsf.2009.05.054 ↗
21. Synthesis and characterization of flash-evaporated MoO3 thin films10.1016/0022-0248(95)00269-3 ↗
22. Effect of substrate temperature and film thickness on the surface structure of some thin amorphous films of MoO3 studied by X-ray photoelectron spectroscopy (ESCA)10.1007/BF01139023 ↗
23. Light-soaking issue in polymer solar cells: photoinduced energy level alignment at the sol–gel processed metal oxide and indium tin oxide interface10.1063/1.4728173 ↗
24. Influences of surface roughness of ZnO electron transport layer on the photovoltaic performance of organic inverted solar cells10.1021/jp308480u ↗
25. XPS study of as-prepared and reduced molybdenum oxides10.1016/0169-4332(95)00317-7 ↗
26. Molecular level study of the formation and the spread of MoO3 on Au (111) by scanning tunneling microscopy and X-ray photoelectron spectroscopy10.1021/ja034862m ↗
27. Epitaxial growth and properties of MoOx (2<x<2.75) films10.1063/1.1868852 ↗
28. A solution-processed MoOx anode interlayer for use within organic photovoltaic devices10.1002/adfm.201102622 ↗
29. Low-temperature, solution-processed MoOx for efficient and stable organic solar cells10.1021/am201825t ↗
30. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap States for application in organic optoelectronics10.1021/ja3026906 ↗
31. Sol–gel synthesized, low-temperature processed, reduced molybdenum peroxides for organic optoelectronics applications10.1039/C4TC00301B ↗
32. Role of the deep-lying electronic states of MoO3 in the enhancement of hole injection in organic thin films10.1063/1.3231928 ↗
33. Enhanced extraction rates through gap states of molybdenum oxide anode buffer10.1021/jp3114013 ↗
34. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
35. Properties of oxygen sites at the MoO3 (0 1 0) surface: density functional theory cluster studies and photoemission experiments10.1016/S0039-6028(01)01169-4 ↗
36. Effect of buffer layers on stability of polymer-based organic solar cells10.1143/JJAP.49.01AC02 ↗