journal article·2016-06

Metal precursor with bi-layer indium for Cu(In,Ga)Se2 thin film preparation

Jun Tong, Hao Zeng, Qiu-Ming Song, Zhu-An Xu, Chun-Lei Yang

Publisher page

Abstract

A novel process was developed to prepare a sequentially stacked CuGa/In precursor using DC magnetron sputtering to make absorber for Cu(In,Ga)Se2 (CIGS) solar cell. Compared with precursor made of normally used single-layer In, CuGa/In film with bi-layer In was found to be with smoother surface and better coverage of the CuGa film by In islands. CIGS absorber prepared by selenizing the precursor with bi-layer In film showed a surface with less roughness, which indicated strong influence of the surface texture of the precursor on the morphology of the absorber. Furthermore, the thickness inhomogeneity of the In islands on the CuGa layer in the precursor was found to induce different degree of mixing for Ga and In, resulting in a lateral composition fluctuation among CIGS grains in addition to the normally observed vertical Ga grading in each grain. By using a precursor with bi-layer In film, an improvement of cell efficiency is always obtained resulting from the increased open circuit voltage (Voc) and larger fill factor (FF).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. CuInl−xGaxSe2 thin film solar cells by two-selenizations process using Se vapor10.1016/0927-0248(95)00146-8 ↗
5. Rapid CIS-process for high efficiency PV-modules10.1016/S0040-6090(00)01800-9 ↗
6. M. Nakamura, Y. Chiba, S. Kijima, K. Horiguchi, Y. Yanagisawa, Y. Sawai, K. Ishikawa, H. Hakuma, Achievement of 17.5% efficiency with 30×30cm2-sized Cu(In,Ga)(Se,S)2 submodules, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, 2012, pp. 1807–1810.10.1109/PVSC.2012.6317944 ↗
7. Preparation of CuIn1−xGaxSe2 thin film by sputtering and selenization process10.1016/S0927-0248(02)00125-3 ↗
8. Effect of precursor structure on Cu(In,Ga)Se2 formation by reactive annealing10.1016/j.tsf.2010.12.220 ↗
9. Improvement of Voc and Jsc in CuInGaSe2 solar cells using a novel sandwiched CuGa/CuInGa/In precursor structure10.1063/1.4705297 ↗
10. Fabrication of CuIn1−xGaxSe2 thin film solar cells by sputtering and selenization process10.1016/S0040-6090(03)00350-X ↗
11. Effect of sputtering conditions of co-sputtered Cu-In-Ga precursors Cu(In,Ga)Se2 photovoltaic absorber formation10.1016/j.tsf.2014.08.017 ↗
12. Another route to fabricate single-phase chalcogenides by post-selenization of Cu-In-Ga precursors sputter deposited from a single ternary target10.1016/j.solmat.2009.02.014 ↗
13. The effects of the morphology on the CIGS thin films prepared by CuInGa single precursor10.1016/j.solmat.2010.04.072 ↗
14. Optimization of Se layer thickness in Mo/CuGa/In/Se precursor for the formation of Cu(In,Ga)Se2 by rapid thermal annealing10.1016/j.tsf.2012.11.082 ↗
15. An optimized In–CuGa metallic precursors for chalcopyrite thin films10.1016/j.tsf.2013.08.054 ↗
16. Development of smooth CuInGa precursor films for CuIn1−xGaxSe2 thin film solar cell applications10.1016/j.tsf.2011.03.138 ↗
17. Insights on the influence of surface roughness on photovoltaic properties of state of the art copper indium gallium diselenide thin films solar cells10.1063/1.4721648 ↗
18. Effect of stacking type in precursors on composition, morphology and electrical properties of the CIGS films10.1007/s10854-013-1132-3 ↗
19. Investigation of Cu(In,Ga)Se2 thin-film formation during the multi-stage co-evaporation process10.1002/pip.1233 ↗
20. Examination of growth kinetics of copper rich Cu(In,Ga)Se2-films using synchrotron energy dispersive X-ray diffractometry10.1016/j.solmat.2010.05.007 ↗
21. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
22. A study on composition, structure and optical properties of copper-poor CIGS thin film deposited by sequential sputtering of CuGa/In and In/(CuGa+In) precursors10.1016/j.jcrysgro.2012.08.013 ↗
23. Formation of CIGS thin absorption layer by sequential sputtering of CuGa/In/CuGa precursor on Mo/SLG with post selenization10.1007/s12540-013-2026-x ↗
24. J.F. Han, C. Liao, T. Jiang, H.M. Xie, K. Zhao, Investigation of Cu(In,Ga)Se2 polycrystalline growth: Ga diffusion and surface morphology evolution, Mater. Res. Bull. 49 (2014) 187–192.10.1016/j.materresbull.2013.08.073 ↗
25. The influence of alloy phases in the precursors on the selenization reaction mechanisms10.1088/0022-3727/42/12/125303 ↗
26. Characterization of variable-band-gap thin-film Cu(In,Ga)Se210.1016/0927-0248(94)90140-6 ↗
27. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films10.1063/1.366122 ↗
28. Improvement of Ga distribution and enhancement of grain growth of CuInGaSe2 by incorporating a thin CuGa layer on the single CuInGa precursor10.1016/j.solener.2011.09.005 ↗
29. CIGS formation by high temperature selenization of metal precursors in H2Se atmosphere10.1016/j.sse.2012.05.055 ↗
30. Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique10.1016/j.cap.2009.11.082 ↗
31. Optical characterization of CuIn1−xGaxSe2 alloy thin films by spectroscopic ellipsometry10.1063/1.1581345 ↗