journal article·2011-02

Anode engineering for photocurrent enhancement in a polymer solar cell and applied on plastic substrate

Hsing-Wang Tsai, Zingway Pei, Chun-Chao Chen, Shor-Jeng Cheng, Wei-Shung Hsieh, Pei-Wen Li, Yi-Jen Chan

Publisher page

Abstract

Abstract In this work, a multilayer structure, PEDOT:PSS/insulator/PEDOT:PSS (CIC), was designed and used as the anode in a polymer solar cell (PSC) to enhance the efficiency at low annealing temperature. The efficiency for PSC with CIC multilayers could increase around 22% as compared to the reference cell. The internal electrical field enhancement due to the effective work function increase by CIC multilayer was assumed and responded to efficiency enhancement. The work function of the multilayer anode structure was explored by an electrostatic force microscopy (EFM) analysis. The EFM result shows that the surface potential of PEDPT:PSS in CIC structure is around 0.6 V higher than PEDOT:PSS in reference structure, indicating a higher work function for PEDOT:PSS in multilayer structure. By the input photon-to-current conversion efficiency (IPCE) study, the major enhancement in photocurrent occurred at solar spectrum range of 400–650 nm. Further applied to plastic substrate, the PSC exhibits 9.2% enhancement in efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
2. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
3. Manufacture, integration and demonstration of polymer solar cells in a lamp for the ‘Lighting Africa’ initiative10.1039/b918441d ↗
4. Fabrication and processing of polymer solar cells—a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
5. Vertically-aligned nanostructures of ZnO for excitonic solar cells—a review10.1039/B811536B ↗
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
8. Organic tandem solar cells—a review10.1039/b817952b ↗
9. A strong antireflective solar cell prepared by tapering silicon nanowires10.1364/OE.18.00A286 ↗
10. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
11. Time-resolved electrostatic force microscopy of polymer solar cells10.1038/nmat1712 ↗
12. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
13. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
14. Polymer photovoltaic cells—enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
15. Ultimate efficiency of polymer fullerene bulk heterojunction solar cells10.1063/1.2181635 ↗
16. Band-offset engineering for enhanced open-circuit voltage in polymer-oxide hybrid solar cells10.1002/adfm.200600215 ↗
17. The influence of materials work function on the open circuit voltage of plastic solar cells10.1016/S0040-6090(01)01586-3 ↗
18. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
19. T.M. Brown, J.S. Kim1, R.H. Friend, F. Cacialli1, R. Daik, and W.J. Feast, Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer, Appl. Phys. Lett. 75 (1999) 1679∼1681.
20. Dual-function semiconducting polymer devices—light-emitting and photodetecting diodes10.1063/1.111885 ↗
21. Energy level alignment regimes at hybrid organic–organic and inorganic–organic interfaces10.1016/j.orgel.2006.10.006 ↗
22. Electronic structure symmetry of interfaces between pentacene and metals10.1063/1.1485129 ↗
23. Interface formation of pentacene on Al2O310.1063/1.1756211 ↗
24. Electric-field induced ion-leveraged metal–insulator transition in conducting polymer-based field effect devices10.1016/S1567-1739(02)00107-4 ↗
25. 1998
26. The influence of the electrical field on structures dimension measurement in electrostatic force microscopy mode
27. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
28. Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system10.1016/j.solmat.2007.04.001 ↗
29. High-performance flexible organic light-emitting diodes using amorphous indium zinc oxide anode10.1149/1.2720635 ↗