journal article·2002-10

Promising window layer of thin film Si solar cell with p–i–n structure prepared by using SiH2Cl2

T Nakashima, M Kondo, A Matsuda

Publisher page

Abstract

Abstract The fabrication process for a-Si:H solar cells with p–i–n structure contains a problem of damage to the SnO 2 substrate particularly at higher process temperatures. We have reported that the suppression of darkening and wide optical gap ( E opt ) are obtained by using SiH 2 Cl 2 instead of SiH 4 as a source gas (Mater. Res. Soc. Symp. Proc. 609 (2000), in press). In this paper, p-type a-Si:H:(Cl) was investigated. Comparable E opt and dark conductivity ( σ dark ) to those of conventional a-SiC:H were obtained. Solar cells using this a-Si:H:(Cl) show higher current density ( J sc ) and higher collection efficiency in all wavelength regions as compared to a p-layer not using chlorine processes. The newly developed p-layer has been applied to solar cells with p–i–n structure fabricated at higher substrate temperatures ( T s ). Although the a-Si:H material deposited at higher substrate temperatures has been reported as being more stable against light soaking (21st IEEE PVSC Proceeding, Florida, USA, 1990, p. 1656), the high temperature processing is difficult to apply to the a-Si:H p–i–n structure because of the significant darkening of SnO 2 at higher T s . With an a-Si:H:(Cl) buffer layer, a-Si:H solar cells can be fabricated at higher T s (∼300°C) with reasonable cell performance. The best stabilized efficiency was 7.5% obtained at a T s of 250°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. S. Nakano, et al., High absorption-coefficient and stable a-Si for high efficiency solar cells, 21st IEEE PVSC Proceeding, Florida, USA, 1990, p. 1656.10.1109/PVSC.1990.111890 ↗
2. T. Nakashima, et al., Suppression of plasma damage on SnO2 by means of a different surface chemistry using dichlorosilane, Mater. Res. Soc. Symp. Proc. 609 (2000), in press.10.1557/PROC-609-A30.5 ↗
3. Enhanced crystallinity at initial growth stage of microcrystalline silicon on corning #7059 glass using SiH2C210.1143/JJAP.38.L554 ↗
4. Effect of substrate surface morphology on microcrystalline silicon solar cells10.1143/JJAP.40.L303 ↗