All-polymer solar cells with in-situ generated n-type conjugated polymer nanoparticles
Source abstract
Abstract
Abstract We report all-polymer solar cells with new electron-accepting (n-type) polymer nanoparticles, poly(2,7-bis(4-hexylthiophen-2-yl)-9H-fluoren-9-one-co-benzothiadiazole) (BHTF-co-BT), which were in-situ generated during polymerization reaction. The size of the BHTF-co-BT nanoparticles was ca. 5–15 nm with a particular single X-ray diffraction peak (d-spacing=1.3 nm), indicative of a highly ordered crystalline state, while their glass transition temperature was ~140 °C. Their band gap energy and ionization potential were 1.8 eV and 5.7 eV, respectively. The possibility of the BHTF-co-BT nanoparticles as an electron acceptor for both normal-type and inverted-type all-polymer (polymer:polymer) solar cells was examined by employing poly(3-hexylthiophene) (P3HT) as an electron donor. The normal-type P3HT:BHTF-co-BT solar cells exhibited promising open circuit voltage ( V oc =0.67–0.73 V) and fill factor (FF=51.3%), while a three-fold improved short circuit current density and higher V oc (0.77 V) were achieved for their inverted-type solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Conjugated polymer nanostructures for organic solar cell applications10.1039/c1py00275a ↗
2. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
3. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
4. Solar cell efficiency tables (version 37)10.1002/pip.1088 ↗
5. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
6. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
7. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
8. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
9. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
10. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
11. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
12. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
13. Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains10.1021/ja204515s ↗
14. A compact multi-chamber setup for degradation and lifetime studies of organic solar cells10.1016/j.solmat.2011.01.023 ↗
15. Initial performance changes of polymer/fullerene solar cells by short-time exposure to simulated solar light10.1002/cssc.200900291 ↗
16. Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa initiative10.1039/b918441d ↗
17. Device performance and lifetime of polymer:fullerene solar cells with UV–ozone-irradiated hole-collecting buffer layers10.1002/cssc.201100192 ↗
18. Organic solar cells with submicron-thick polymer:fullerene bulk heterojunction films10.1063/1.3488002 ↗
19. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
20. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
21. Charge generation kinetics and transport mechanisms in blended polyfluorene photovoltaic devices10.1021/nl0257418 ↗
22. Organic photovoltaic devices based on blends of regioregular poly(3-hexylthiophene) and poly(9,9-dioctylfluorene-co-benzothiadiazole)10.1021/cm049585c ↗
23. Distinct annealing temperature in polymer:fullerene:polymer ternary blend solar cells10.1021/jp809589n ↗
24. Influence of electron-donating polymer addition on the performance of polymer solar cells10.1088/0022-3727/41/22/225101 ↗
25. Efficient polythiophene/polyfluorene copolymer bulk heterojunction photovoltaic devices: device physics and annealing effects10.1002/adfm.200800182 ↗
26. Influence of nanoscale phase separation on the charge generation dynamics and photovoltaic performance of conjugated polymer blends: balancing charge generation and separation10.1021/jp075904m ↗
27. All-polymer photovoltaic devices of poly(3-(4-n-octyl)-phenylthiophene) from Grignard metathesis (GRIM) polymerization10.1021/ja9059359 ↗
28. Polymer/polymer blend solar cells with 2.0% efficiency developed by thermal purification of nanoscale-phase-separated morphology10.1021/am200624s ↗
29. All-polymer solar cells from perylene diimide based copolymers: material design and phase separation control10.1002/anie.201005408 ↗
30. Improved performance of polymer:polymer solar cells by doping electron-accepting polymers with an organosulfonic acid10.1002/adfm.201101215 ↗
31. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
32. Multilayer organic solar cells with wet-processed polymeric bulk heterojunction film and dry-processed small molecule films
33. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
34. Distorted asymmetric cubic nanostructure of soluble fullerene crystals in efficient polymer:fullerene solar cells10.1021/nn900798m ↗
35. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
36. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
37. Formation of nanopatterned polymer blends in photovoltaic devices10.1021/nl904098m ↗
38. Polymer blend solar cells based on a high-mobility naphthalenediimide-based polymer acceptor: device physics, photophysics and morphology10.1002/aenm.201000035 ↗
39. Abrupt morphology change upon thermal annealing in poly(3-hexylthiophene)/soluble fullerene blend films for polymer solar cells10.1002/adfm.200901655 ↗
40. Temperature/time-dependent crystallization of polythiophene:fullerene bulk heterojunction films for polymer solar cells10.1039/c0nr00379d ↗
41. Discovering green, aqueous Suzuki coupling reactions: synthesis of ethyl (4-phenylphenyl)acetate, a biaryl with anti-arthritic potential10.1021/ed200212p ↗
42. Polymer/polymer blend solar cells improved by using high-molecular-weight fluorene-based copolymer as electron acceptor10.1021/am300623f ↗
43. Steric control of the donor/acceptor interface: implications in organic photovoltaic charge generation10.1021/ja203235z ↗
44. Toward tuning electrical and optical properties in conjugated polymers using side-chains: highly conductive head-to-tail, heteroatom functionalized polythiophenes10.1021/ja00077a074 ↗
45. Long time thermal annealing effects on the film morphology and performance of polymer solar cells with calcium electrode10.1007/BF03218888 ↗
46. Nanomorphology-driven two-stage hole mobility in blend films of regioregular and regiorandom polythiophenes10.1039/c1nr10670h ↗
47. Poly(3-hexylthiophene-co-benzothiadiazole) (THBT) as an electron-accepting polymer for normal and inverted type all-polymer solar cells10.1039/c2py21144k ↗
48. All-polymer solar cells with bulk heterojunction nanolayers of chemically doped electron-donating and electron-accepting polymers10.1039/c2cp43002a ↗