journal article·2014-11

Influence of TiO x and Ti cathode interlayers on the performance and stability of hybrid solar cells

Sebastian Dunst, Thomas Rath, Stefan Moscher, Lukas Troi, Matthias Edler, Thomas Griesser, Gregor Trimmel

Publisher page

Abstract

Abstract The performance of organic and hybrid solar cells is, in addition to the properties of the absorber layer, also strongly dependent on electrodes and interlayers extracting the charges generated in the absorber layer. Here, we investigate Ti and TiOx interlayers regarding the performance and stability of polymer/copper indium sulfide hybrid solar cells with aluminum and silver electrodes. For this, TiOx interlayers were prepared via thermal evaporation of titanium under moderate vacuum conditions in oxygen containing atmosphere, whereas Ti interlayers were deposited under high vacuum conditions. The titanium-based interlayers improved the power conversion efficiencies of solar cells with Al as well as with Ag electrodes. Also the stability of solar cells with Al electrodes was improved; however, solar cells with Ag electrodes and TiOx as well as Ti interlayers turned out to be much more stable and showed lifetimes of several thousand hours under continuous illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Solar cell efficiency tables (version 43)10.1002/pip.2452 ↗
3. High-efficiency hybrid solar cells based on polymer/PbSx Se1−x nanocrystals benefiting from vertical phase segregation10.1002/adma.201302340 ↗
4. The renaissance of hybrid solar cells: progresses, challenges, and perspectives10.1039/c3ee23666h ↗
5. Bulk-heterojunction hybrid solar cells based on colloidal nanocrystals and conjugated polymers10.1039/c0ee00143k ↗
6. Hybrid polymer-nanocrystal materials for photovoltaic applications10.1002/cphc.201101016 ↗
7. Hybrid polymer/nanoparticle solar cells: preparation, principles and challenges10.1016/j.jcis.2011.12.016 ↗
8. Conjugated polymers/semiconductor nanocrystals hybrid materials-preparation, electrical transport properties and applications10.1039/C0NR00403K ↗
9. Organic-inorganic hybrid solar cells: a comparative review10.1016/j.solmat.2012.07.006 ↗
10. Materials, nanomorphology, and interfacial charge transfer reactions in quantum dot/polymer solar cell devices10.1021/jz101228z ↗
11. Hybrid solar cells: basic principles and the role of ligands10.1039/C1JM14829J ↗
12. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
13. Stability of polymer solar cells10.1002/adma.201104187 ↗
14. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
15. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
16. Hybrid polymer-CdSe solar cells with a ZnO nanoparticle buffer layer for improved efficiency and lifetime10.1039/c0jm03799k ↗
17. Solution-processed, nanostructured hybrid solar cells with broad spectral sensitivity and stability10.1039/c2nr30210a ↗
18. Effects of nanocrystal size and device aging on performance of hybrid poly(3-hexylthiophene):CdSe nanocrystal solar cells10.1016/j.solmat.2010.09.005 ↗
19. CuInS2–Poly(3-(ethyl-4-butanoate)thiophene) nanocomposite solar cells: preparation by an in situ formation route, performance and stability issues10.1016/j.solmat.2010.12.025 ↗
20. Air-stable inverted structure of hybrid solar cells using a cesium-doped ZnO electron transport layer prepared by a sol–gel process10.1039/c3ta12425h ↗
21. Understanding the improved stability of hybrid polymer solar cells fabricated with copper electrodes10.1021/am200067d ↗
22. An ultraviolet responsive hybrid solar cell based on titania/poly(3-hexylthiophene)10.1038/srep01283 ↗
23. Flexible polymer/copper indium sulfide hybrid solar cells and modules based on the metal xanthate route and low temperature annealing10.1016/j.solmat.2014.01.043 ↗
24. Efficient polymer nanocrystal hybrid solar cells by improved nanocrystal composition10.1016/j.solmat.2011.07.015 ↗
25. Polymer solar cells with enhanced lifetime by improved electrode stability and sealing10.1016/j.solmat.2013.05.013 ↗
26. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
27. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
28. A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer10.1016/j.solmat.2010.12.030 ↗
29. High performance polythiophene/fullerene bulk-heterojunction solar cell with a TiOx hole blocking layer10.1063/1.2730746 ↗
30. Titanium suboxide as an optical spacer in polymer solar cells10.1063/1.3159622 ↗
31. Efficient tandem polymer photovoltaic cells using inorganic metal oxides as a transparent middle connection unit10.1016/j.orgel.2010.05.004 ↗
32. Solution-processed nanocrystalline TiO2 buffer layer used for improving the performance of organic photovoltaics10.1021/am101202k ↗
33. Improved power conversion efficiency by insertion of RGO–TiO2 composite layer as optical spacer in polymer bulk heterojunction solar cells10.1016/j.orgel.2013.11.027 ↗
34. Conformal coating of titanium suboxide on carbon nanotube networks by atomic layer deposition for inverted organic photovoltaic cells10.1016/j.carbon.2012.05.027 ↗
35. Titanium dioxide electron-selective interlayers created by chemical vapor deposition for inverted configuration organic solar cells10.1039/c3ta10894e ↗
36. Influence of cathode sputter deposition on organic solar cells10.1063/1.2472719 ↗
37. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
38. Performance and stability improvement of P3HT:PCBM-based solar cells by thermally evaporated chromium oxide (CrOx) interfacial layer10.1021/am100541d ↗
39. A direct route towards polymer/copper indium sulfide nanocomposite solar cells10.1002/aenm.201100442 ↗
40. In situ syntheses of semiconducting nanoparticles in conjugated polymer matrices and their application in photovoltaics
41. Influence of morphology and polymer:nanoparticle ratio on device performance of hybrid solar cells – an approach in experiment and simulation10.1088/0957-4484/24/48/484005 ↗
42. Nanostructured hybrid polymer-inorganic solar cell active layers formed by controllable in situ growth of semiconducting sulfide networks10.1021/nl903787j ↗
43. Direct growth of metal sulfide nanoparticle networks in solid-state polymer films for hybrid inorganic-organic solar cells10.1002/adma.201100625 ↗
44. Bismuth sulphide-polymer nanocomposites from a highly soluble bismuth xanthate precursor10.1039/c3tc31684j ↗
45. Solution processed polymer-inorganic semiconductor solar cells employing Sb2S3 as a light harvesting and electron transporting material10.1002/aenm.201300017 ↗
46. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
47. Improved nonaqueous synthesis of TiO2 for dye-sensitized solar cells10.1021/nn403500g ↗
48. C.D. Wagner, A.V. Naumkin, A. Kraut-Vass, J.W. Allison, C.J. Powell, J.R. Jr. Rumble, NIST Standard Reference Database 20, Version 3.4 (web version) (〈http:/srdata.nist.gov/xps/〉) 2003.
49. The work function of the elements and its periodicity10.1063/1.323539 ↗
50. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
51. Oxidation of silver electrodes induces transition from conventional to inverted photovoltaic characteristics in polymer solar cells10.1063/1.3257361 ↗
52. The electronic structure and energy level alignment of porphyrin/metal interfaces studied by ultraviolet photoelectron spectroscopy10.1063/1.114370 ↗
53. Comprehensive investigation of silver nanoparticle/aluminum electrodes for copper indium sulfide/polymer hybrid solar cells10.1021/jp306242e ↗
54. Titanium-aluminum bilayer cathode for small-molecular organic solar cells with prolonged life upon exposure to air10.7567/JJAP.52.040202 ↗