journal article·2003-01

Effect of first-stage temperature on Cu(In,Ga)Se solar cells using the evaporation of binary selenide compounds

D LEE, B AHN, K YOON, J SONG

Publisher page

Abstract

Cu(In,Ga)Se 2 films were prepared by a three-stage process using the evaporation of In 2Se 3, Ga 2Se 3, Cu 2Se, and Se. In the first stage, the (In,Ga) 2Se 3 layer was deposited at the substrate temperatures of 150°C and 325°C by the evaporation of In 2Se 3, Ga 2Se 3, and Se. The CIGS film had small grains with a bi-layer morphology at 150°C, while the film had large grains without the bi-layer morphology at 325°C. As the first-stage temperature increased, the CdS/Cu(In,Ga)Se 2 solar efficiency was improved from 9.3% to 11.7% for 0.21 cm 2 active area. The efficiency improvement was attributed to the reduction of the recombination at the CdS/Cu(In,Ga)Se 2 interface and recombination within Cu(In,Ga)Se 2 film bulk due to the increase of Cu(In,Ga)Se 2 grain size. These findings were supported by the increased hole density, reduced reverse saturation current, and enhanced spectral response with increasing the first-stage temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.