Non-isothermal crystallization behavior of molten salt-based nanofluids
Source abstract
Abstract
Molten salts are promising phase change materials for high-temperature thermal energy storage. Mixing molten salts with nanoparticles is attracting much attention to enhance thermal performance. However, the solid-liquid phase transition mechanism of molten salt mixing with nanoparticles has not been revealed. Therefore, this study focuses on the non-isothermal crystallization behavior of solar salt (SS) and two solar salt-based nanofluids (Ag-SS and SiO 2-SS). Firstly, SS, Ag-SS and SiO 2-SS samples were prepared and characterized. Secondly, based on the DSC test results, the kinetic characteristics of the samples under different cooling rates were analyzed by the Jeziorny-modified Avrami equation and the combined model of Avrami and Ozawa. Then, the activation energy was calculated, and the phase diagram analysis was introduced to analyze the crystallization process. Finally, the topological evolution of crystals obtained from the visual experiments was discussed. The results showed that the latent heat of solar salt slightly reduced when mixing with 0.5 wt% SiO 2 nanoparticles but hardly changed with 0.5 wt% Ag nanoparticles. The crystallization of solar salt slowed down about 8 % after adding 0.5 wt% Ag nanoparticles but hardly changed with 0.5 wt% SiO 2 nanoparticles. The Jeziorny-modified Avrami equation can describe the first crystallization stage of the samples, while it was not for the second stage due to the eutectic transition. Adding Ag and SiO 2 nanoparticles would change the topological evolution of solid-liquid crystals. During the first crystallization phase, SS showed mainly epitaxial crystals with strong main stems, Ag-SS lots of acicular crystals, and SiO 2-SS snowflake crystals with well-developed lateral branches.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Phase Change Materials Research · Petroleum Processing and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Potential of phase change materials and their effective use in solar thermal applications: a critical review10.1016/j.applthermaleng.2022.119417 ↗
2. Using of heat thermal storage of PCM and solar energy for distributed clean building heating: a multi-level scale-up research10.1016/j.apenergy.2022.119345 ↗
3. Application of material assessment methodology in latent heat thermal energy storage for waste heat recovery10.1016/j.apenergy.2016.11.070 ↗
4. Application of phase change materials in thermal management of electronics10.1016/j.applthermaleng.2006.12.013 ↗
5. State of the art on high temperature thermal energy storage for power generation. Part 1—concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
6. An update review of molecular dynamic study on thermal physical properties of molten salt10.1016/j.solmat.2024.112916 ↗
7. Effect of Na2CO3 content on thermophysical properties, corrosion behaviors of KNO3-NaNO2 molten salt10.1016/j.energy.2024.133378 ↗
8. Experimental study on optimized composition of mixed carbonate for phase change thermal storage in solar thermal power plant10.1007/s10973-011-1364-5 ↗
9. Eutectic Na2CO3–NaCl salt: a new phase change material for high temperature thermal storage10.1016/j.solmat.2016.04.002 ↗
10. A new low-cost high-temperature shape-stable phase change material based on coal fly ash and K2CO310.1016/j.solmat.2019.110328 ↗
11. Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities10.1016/j.applthermaleng.2023.122034 ↗
12. Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage10.1016/j.solmat.2021.111485 ↗
13. Review on heat conduction, heat convection, thermal radiation and phase change heat transfer of nanofluids in porous media: fundamentals and applications10.1016/j.ces.2018.09.045 ↗
14. Magnesium oxide nanoparticles dispersed solar salt with improved solid phase thermal conductivity and specific heat for latent heat thermal energy storage10.1016/j.renene.2019.04.027 ↗
15. Latent and sensible energy storage enhancement of nano-nitrate molten salt10.1016/j.solener.2018.04.012 ↗
16. Experimental investigation into the thermos-physical properties by dispersing nanoparticles to the nitrates10.1016/j.egypro.2019.01.588 ↗
17. Preparation and characterization of high temperature shape stable NaNO3/diatomite phase change materials with nanoparticles for solar energy storage applications10.1016/j.est.2021.103735 ↗
18. Enhancements in thermal properties of binary alkali chloride salt by Al2O3 nanoparticles for thermal energy storage10.1016/j.energy.2024.131584 ↗
19. Molten salt-based nanocomposites for thermal energy storage: materials, preparation techniques and properties10.1016/j.rser.2022.112548 ↗
20. Specific heat capacity of molten salt-based alumina nanofluid10.1186/1556-276X-8-292 ↗
21. Role of Brownian motion in the enhanced thermal conductivity of nanofluids10.1063/1.1756684 ↗
22. Effective dipole–dipole interactions in critical nanofluids10.1016/j.jmr.2013.01.003 ↗
23. Study of viscosity and heat capacity characteristics of molten salt nanofluids for thermal energy storage10.1016/j.solmat.2020.110503 ↗
24. In situ production of copper oxide nanoparticles in a binary molten salt for concentrated solar power plant applications10.3390/ma10050537 ↗
25. Non-isothermal crystallization behavior of Ag nanoparticles modified expanded graphite/paraffin composite phase change material10.1016/j.est.2022.106371 ↗
26. On the specific heat capacity of HITEC-salt nanocomposites for concentrated solar power applications10.1039/D2RA07384F ↗
27. Unexpected effect of nanoparticles doping on the corrosivity of molten nitrate salt for thermal energy storage10.1016/j.solmat.2018.01.002 ↗
28. Thermodynamics behavior of phase change latent heat materials in micro-/nanoconfined spaces for thermal storage and applications10.1016/j.rser.2017.08.080 ↗
29. Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: a review10.1016/j.nanoen.2018.09.007 ↗
30. Effect of Ag nanowires on crystallization behavior of polyethylene glycol/expanded vermiculite composite phase change material10.1016/j.est.2020.102223 ↗
31. Nanoconfined phase change materials for thermal energy applications10.1039/C7EE03587J ↗
32. Mechanism of heat capacity enhancement in molten salt nanofluids10.1016/j.ijheatmasstransfer.2020.120260 ↗
33. Experimental and numerical investigation of the melting process of solar salt in a spherical capsule10.1016/j.est.2023.109388 ↗
34. Colloidal stability of molten salt –based nanofluids: dynamic light scattering tests at high temperature conditions10.1016/j.powtec.2019.04.045 ↗
35. Experimental study on thermal performance of high-temperature molten salt cascaded latent heat thermal energy storage system10.1016/j.ijheatmasstransfer.2017.11.024 ↗
36. Non-isothermal crystallization kinetics of paraffin wax as a phase changing energy storage material10.1088/1402-4896/abb49f ↗
37. Isothermal and non-isothermal crystallization kinetics of a polyglycolide copolymer having a tricomponent middle soft segment10.1016/j.tca.2014.03.049 ↗
38. Non-isothermal crystallization kinetics of iPP/sPP blends10.1016/j.tca.2008.10.006 ↗
39. Effect of in situ prepared silica nanoparticles on non-isothermal crystallization of polypropylene10.1016/j.polymer.2004.12.062 ↗
40. Non-isothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone)10.1002/pen.11700 ↗
41. Homer kissinger and the kissinger equation10.1016/j.tca.2012.04.008 ↗
42. The NaNO3 –KNO3 phase diagram10.1080/01411594.2015.1083567 ↗