CdTe absorber layers grown under Cd-rich conditions by MOCVD: Impact on surface morphology and structure
Source abstract
Abstract
The analyses of surface morphology and microstructural properties of CdTe thin film absorber layers, deposited by metal organic chemical vapour deposition (MOCVD) on CdS/CdZnS/FTO-coated glass substrates as a function of different growth conditions (non–saturated or Cd–saturated growth condition and post–growth CdCl 2 heat treatment) are presented. Scanning electron microscopy (SEM) images showed that the CdTe absorber surface morphology was relatively smoother with Cd-saturated growth compared to non-saturated conditions, while using a similar II/VI precursor partial pressure ratio. Microstructural characterisation using electron back scatter diffraction (EBSD) measurements indicate a strong influence of the II/VI ratios on the crystalline structure and degree of recrystallisation in Cd–saturated deposited CdTe absorber layers. CdTe absorber layers from a low II/VI ratio of 2 showed a strong Te(A1) Raman spectra band, characteristic of a Te rich composition, whilst a Cd–saturated composition was confirmed in the case of II/VI ratio of 4, as Te(A1) band was significantly suppressed. Cd–saturated grown CdTe:As (II/VI = 4), combined with a CdCl 2 activation process at 440 °C, yielded optimum, highly randomized textured absorber with large grains. Reduced [111] oriented grains and suppression of Te(A1) mode was found to lead to higher V OC in devices. A high efficiency CdTe:As solar cell with a high V OC of 825 mV was measured based on the optimum growth condition for the absorber layers. Appearance of CdTe layers fabricated under different growth conditions, and after CdCl 2 treatment, DI water rinse and 170 °C for 90 min air anneal, cleaved from 5 × 5 cm 2 coupons: (a) non–saturated, looking dark greyish, and (b) Cd–saturated (smoother and lighter looking surface). Cross section backscatter electron image of non–saturated (c) and Cd–saturated (d), grown CdTe absorber layer, showing different grain structures as a function of MOCVD growth conditions. • MOCVD Cd-saturated CdTe absorber layers exhibit smoother mirror-like surfaces compared to non-saturated grown samples. • Post-growth CdCl 2 heat treatment (CHT) at 440 °C promotes further surface and microstructural changes in CdTe layers. • Cd-saturated growth with II/VI ratio of 4, resulted in increased randomized crystal texture, and grain size. • Suppressed Te(A1) Raman mode and reduced Te segregates in Cd-saturated absorber layer correlated with improved device V OC . • High V OC of 825 mV was achieved with Cd-saturated CdTe:As absorbers from II/VI ratio of 4, combined with CHT at 440°C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Exceeding 20% efficiency with in-situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
2. Dependence of the minority-carrier lifetime on the stoichiometry of CdTe using time-resolved photoluminescence and first-principles calculations10.1103/PhysRevLett.111.067402 ↗
3. Arsenic doped Cd-rich CdTe: equilibrium doping limit and long lifetime for high open-circuit voltage solar cells greater than 900 mV
4. Doping engineering in the CdTe thin film solar cells10.1002/cmt2.29 ↗
5. Impact of in-situ Cd saturation MOCVD grown CdTe solar cells on as doping and VOC10.1109/JPHOTOV.2022.3195086 ↗
6. A low-cost non-toxic post-growth activation step for CdTe solar cells10.1038/nature13435 ↗
7. Effects of CdCl2 treatment on the recrystallization and electro-optical properties of CdTe thin films10.1116/1.581269 ↗
8. Effect of CdCl2 treatment on structural and electronic property of CdTe thin films deposited by magnetron sputtering10.1016/j.tsf.2013.04.067 ↗
9. Effect of CdCl2 annealing treatment on structural and optoelectronic properties of close spaced sublimation CdTe/CdS thin film solar cells vs deposition conditions10.1016/j.tsf.2014.11.066 ↗
10. Effect of CdCl2 passivation treatment on microstructure and performance of CdSeTe/CdTe thin-film photovoltaic devices10.1016/j.solmat.2018.06.016 ↗
11. The influence of CdTe growth ambient on MOCVD grown CdS/CdTe photovoltaic cells10.1016/S0040-6090(00)01722-3 ↗
12. “MOCVD of thin film photovoltaic solar cells—next-generation production technology?10.1016/j.jcrysgro.2008.07.121 ↗
13. Creating metal saturated growth in MOCVD for CdTe solar cells10.1016/j.jcrysgro.2023.127124 ↗
14. Improvement to thin film CdTe solar cells with controlled back surface oxidation10.1016/j.solmat.2014.10.044 ↗
15. Complete in situ laser monitoring of MOCVD HgCdTe/CdTe/ZnTe growth onto GaAs substrates10.1016/0022-0248(92)90532-N ↗
16. CdTe grown under Cd/Te excess at very low temperatures for solar cells10.1063/1.4809761 ↗
17. Quasiatomically flat surfaces of CdTe growth by evaporation technique10.1016/S0040-6090(96)09101-8 ↗
18. Properties of CdCl2 air-annealed CSS CdTe thin films. E-MRS spring meeting 2013 symposium D - advanced inorganic materials and structures for photovoltaics, 27-31 may 2013, strasbourg, France10.1016/j.egypro.2013.12.013 ↗
19. Recrystallization in CdTe/CdS10.1016/S0040-6090(99)00753-1 ↗
20. Effect of CdCl2 annealing treatment on structural and optoelectronic properties of close spaced sublimation CdTe/CdS thin film solar cells vs deposition conditions10.1016/j.tsf.2014.11.066 ↗
21. Electron backscatter diffraction: exploring the microstructure in Cu (In,Ga)(S,Se)2 and CdTe thin-film solar cells
22. Microscopic analysis of interdiffusion and void formation in CdTe(1–x)Sex and CdTe layers10.1021/acsami.0c09381 ↗
23. Kornienko · 2022
24. Microtexture of chloride treated CdTe thin films deposited by CSS technique10.1007/s10853-007-1708-5 ↗
25. Electron backscatter diffraction of CdTe thin films: effects of CdCl2 treatment10.1116/1.2841523 ↗
26. Absorber texture and the efficiency of polycrystalline thin film CdTe solar cells10.1016/j.tsf.2024.140277 ↗
27. Influence of CdTe deposition temperature and window thickness on CdTe grain size and lifetime after CdCl2 recrystallization10.1109/JPHOTOV.2018.2790701 ↗
28. Raman scattering study of the properties and removal of excess Te on CdTe surfaces10.1063/1.95367 ↗
29. Effect of the composition on physical properties of CdTe absorber layer fabricated by chemical molecular beam deposition for use in thin film solar cells10.1063/1.4739277 ↗
30. Topic review: application of Raman spectroscopy characterization in micro/nano-machining10.3390/mi9070361 ↗
31. Effects of CdTe growth conditions and techniques on the efficiency limiting defects and mechanisms in CdTe solar cells10.1063/1.49428 ↗
32. Influence of Te inclusions and precipitates on the crystalline and thermal properties of CdTe single crystals10.1016/S0022-0248(00)00005-1 ↗
33. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗