journal article·2024-06Open access

Applying and evaluating a new method to determine the interconnection-induced resistance in shingle solar modules

Julian Weber, Alexander Krieg, Torsten Roessler

Abstract

This work deals with shingle solar modules, in particular the interconnection of shingle solar cells by using an electrically conductive adhesive (ECA), as well as by simply overlapping the same type of shingle solar cells but omitting the ECA. For both types of interconnection, the resistance due to interconnection R int and the corresponding cell-to-module (CTM) power loss Δ P MPP in the case of a full-size shingle module are quantified, finding R int ≈ 0.26 mΩ and Δ P MPP ≈ −0.4 W for the ECA-based interconnection, and R int ≈ 0.86 mΩ and Δ P MPP ≈ −1.2 W for the ECA-free interconnection. The work mainly focuses on the methodology used to derive these numbers from small-format modules containing shingle strings of different lengths. An extensive error discussion is given, as well as a discussion on the advantages over a different approach to determine R int . • A new method for characterizing shingle solar cell interconnection is introduced. • The interconnection-induced resistance in shingle solar modules is measured. • Conventional electrically conductive adhesive-based shingle joints are tested. • Electrically conductive adhesive-free busbar-to-busbar shingle joints are tested.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 2023
2. The sun is rising on conductive adhesives
3. Solar cell demand for bifacial and singulated-cell module architectures
4. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
5. Electrically conductive adhesives as cell interconnection material in shingled module technology10.1063/1.5049305 ↗
6. Shingled cell interconnection: a new generation of bifacial PV-modules
7. Cell-to-module (CTM) analysis for photovoltaic modules with shingled solar cells10.1109/PVSC.2017.8366260 ↗
8. Schulte-Huxel · 2021
9. PERC-based shingled solar cells and modules at Fraunhofer ISE
10. How to assess the electrical quality of solar cell interconnection in shingle solar modules10.1002/pip.3699 ↗
11. Devoto · 2021 · 627
12. Contact resistivity of ECA bonded joints: how to extrapolate it?10.1063/5.0127175 ↗
13. Validation of methodology to determine the contact resistivity of ECA-based bonds grounded on end–contact resistance measurements using redundant and modified TLM test structures
14. Electrically conductive adhesive-free interconnection of shingle solar cells. 11th Metallization and Interconnection Workshop 2023
15. Lausch · 2018 · 1060
16. Weber · 2022
17. Study of temperature coefficients for parameters of photovoltaic cells10.1155/2018/5945602 ↗
18. Influence of temperature on methods for determining silicon solar cell series resistance10.1115/1.2735350 ↗
19. Assessment of series resistance components of a solar PV module depending on its temperature under real operating conditions
20. FoilMet®-Interconnect: busbarless, electrically conductive adhesive-free, and solder-free aluminum interconnection for modules with shingled solar cells10.1002/pip.3470 ↗