Reduction of the initial defects generated during casting of quasi-single crystalline silicon by reserving gaps between seed crystals
Source abstract
Abstract
The presence of dislocation is a significant impediment to enhancing the quality of quasi-single crystalline silicon cast by seed-assisted directional solidification. A novel approach was proposed to reduce dislocations in G7 166-type silicon ingots, especially in the region of seed crystal seams, by reserving seed crystal gaps during loading. We calculated that the seed crystal`s linear thermal expansion after heating from 298.15 to 1683.15 K was 0.9 mm. However, in consideration of the actual deviation in seed processing and measurement, we increased the gap between seeds to 1.2 mm to prevent compressive stress on all 49 seed crystals. The actual residual seed gap measured after ingot casting was approximately 0.325 mm, which is relatively close to the calculated value. It was discovered that the average defect ratio in the silicon blocks decreased from 26.95% (without gaps) to 6.79% (with 1.2 mm seed gaps) for the proposed method. This indicates that a portion of the dislocation source was reduced by reducing compressive stress caused by linear expansion between adjacent unmelted seeds. The average conversion efficiency of the solar cells prepared using the gapless seed method for p-type polycrystalline cells is 22.03%, whereas the novel approach resulted in an average cell efficiency of 22.22%, featuring a higher proportion of high-efficiency sections.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Realization of bulk multicrystalline silicon with controlled grain boundaries by utilizing spontaneous modification of grain boundary configuration10.1143/JJAP.45.1734 ↗
2. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method10.1016/j.solmat.2014.08.022 ↗
3. Control of ingot quality and solar cell appearance of cast mono-like silicon by using seed partitions10.1016/j.jcrysgro.2017.06.014 ↗
4. Seed-assisted growth of cast-mono silicon for photovoltaic application: challenges and strategies
5. Defect engineering in cast mono-like silicon: a review
6. Casting single crystal silicon: novel defect profiles from BP Solar's mono2 TM wafers
7. Slip nuclei in silicon-iron10.1016/0001-6160(65)90099-4 ↗
8. Dislocation dynamics in the plastic deformation of silicon crystals10.1002/pssa.2210500239 ↗
9. Dislocation dynamics in the plastic deformation of silicon crystals, Ⅱ. Theoretical analysis of experimental results10.1002/pssa.2210510124 ↗
10. Dislocation dynamics and mechanical behavior of elemental and compound semiconductors10.1002/pssa.2211380225 ↗
11. Study of evolution of dislocation clusters in high performance multicrystalline silicon10.1016/j.solmat.2014.02.034 ↗
12. Thermal stress induced dislocation distribution in directional solidification of Si for PV application10.1016/j.jcrysgro.2014.09.017 ↗
13. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
14. Generation mechanism of dislocations during directional solidification of multicrystalline silicon using artificially designed seed10.1016/j.jcrysgro.2010.01.011 ↗
15. Defect formation induced by seed-joints during directional solidification of quasi-mono-crystalline silicon ingots10.1016/j.jcrysgro.2014.08.002 ↗
16. Structure and dislocation development in mono-like silicon10.1002/pssa.201532105 ↗
17. Designing functional Σ13 grain boundaries at seed junctions for high-quality casting quasi-single crystalline silicon10.1016/j.solmat.2019.109985 ↗
18. Dislocation formation in seeds for quasi-monocrystalline silicon for solar cells10.1016/j.actamat.2013.12.010 ↗
19. Controlling solidification front shape and thermal stress in growing quasi-single-crystal silicon ingots: process design for seeded directional solidification10.1016/j.applthermaleng.2015.08.023 ↗
20. Cellular dislocations patterns in mono-like silicon: influence of stress, time under stress and impurity doping10.1016/j.jcrysgro.2018.03.002 ↗
21. Amaral de Oliveira · 2014 · 793
22. 3D visualization and analysis of dislocation clusters in multicrystalline silicon ingot by approach of data science10.1016/j.solmat.2018.06.008 ↗
23. Evaluation of defects generation in crystalline silicon ingot grown by cast technique with seed crystal for solar cells10.1063/1.3700250 ↗
24. Segregation, precipitation and dislocation generation between seeds in directionally solidified mono-like silicon for photovoltaic applications10.1016/j.jcrysgro.2013.12.022 ↗
25. Characterization of defects in mono-like silicon for photovoltaic applications using X-ray Bragg diffraction imaging10.1107/S1600576715004926 ↗
26. Plastic deformation as an origin of dislocations in cast mono10.1016/j.egypro.2016.07.082 ↗
27. Influence of grain boundaries intentionally induced between seed plates on the defect generation in quasi-mono-crystalline silicon ingots10.1002/crat.201400226 ↗
28. Influence of structural imperfection of ∑5 grain boundaries in bulk multicrystalline Si on their electrical activities10.1063/1.2710348 ↗
29. Control of grain boundary propagation in mono-like Si: utilization of functional grain boundaries
30. Seed manipulation for artificially controlled defect technique in new growth method for quasi-monocrystalline Si ingot based on casting
31. Application of a new grain boundary technology for quasi-single crystalline silicon ingots10.1016/j.jcrysgro.2023.127109 ↗
32. The effect of seed arrangements on the quality of n-type mono-like silicon grown by directional solidification
33. Thermal expansion of AlN, sapphire, and silicon10.1063/1.1663432 ↗
34. Thermal expansion of some diamondlike crystals10.1063/1.321373 ↗
35. Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K10.1063/1.333965 ↗
36. Theory of the thermal expansion of Si and diamond10.1103/PhysRevB.43.5024 ↗
37. Linear thermal expansion coefficient of silicon from 293 to 1000 K10.1023/B:IJOT.0000022336.83719.43 ↗
38. Dislocation etch for (100) planes in silicon10.1149/1.2404374 ↗
39. A new form of impurity cluster in casting quasi-single crystalline silicon10.1016/j.jcrysgro.2022.126704 ↗