Point contact openings in surface passivated macroporous silicon layers
Source abstract
Abstract
Abstract In this paper we demonstrate the preparation of point contact openings in surface passivated macroporous silicon layers. In our experiments we control the etching parameters to vary the percentage of these non-passivated local openings from 0% to 1.6%. We investigate the impact of these local openings in the passivating layer on the effective carrier lifetime. These local openings reduce the measured effective carrier lifetime with increasing percentage of the non-passivated areas. We measure effective carrier lifetimes up to 10 μs on 29 μm-thick fully passivated macroporous silicon samples. We develop and apply a 3-dimensional numerical model to calculate carrier lifetimes as a function of pore morphology, surface recombination, percentage of non-passivated area, and bulk lifetime. The model agrees with the experimental measurements. We find a surface recombination velocity of ( S p a s s = 22.8 − 1.4 + 1.6 ) cm s−1 for the passivated surfaces and Snp= ( 2200 − 1400 + 1500 ) cm s−1 for the non-passivated surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Nanostructures and Photoluminescence · Semiconductor materials and devices · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. P. Fath, S. Keller, P. Winter, W. Jooss, W. Herbst, Status and perspective of crystalline silicon solar cell production, in: 34th IEEE Photovoltaic Specialists Conference, IEEE, 2009, pp. 2471–2476.10.1109/PVSC.2009.5411274 ↗
2. Limiting efficiency of silicon solar cells10.1109/T-ED.1984.21594 ↗
3. H. Tayanaka, T. Matsushita, Separation of thin epitaxial Si film on porous Si for solar cells, in: Proceedings of the 6th Sony Research Forum, Sony, 1996, p. 556 (in Japanese).
4. Brendel · 1997
5. 19% efficient and 43μm-thick crystalline Si solar cell from layer transfer using porous silicon10.1002/pip.1129 ↗
6. F. Henley, A. Brailove, A. Lamm, T. Heerwagen, E. Sauar, M. Nese, R. Steeman, B. Hammel, Kerf-free silicon wafering equipment configuration using beam-induced cleave technology, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Information Press, Eynsham, UK, 2008, p. 2017.
7. Epitaxy-free monocrystalline silicon thin film: first steps beyond proof-of-concept solar cells10.1002/pip.1048 ↗
8. Macroporous Si as an absorber for thin-film solar cells10.1002/pssr.200903372 ↗
9. Modeling effective carrier lifetimes of passivated macroporous silicon layers10.1016/j.solmat.2011.01.017 ↗
10. Formation mechanism and properties of electrochemically etched trenches in n-type silicon10.1149/1.2086525 ↗
11. Examination of the Si(111)–SiO2, Si(110)–SiO2, and Si(100)–SiO2 interfacial properties following rapid thermal annealing10.1149/1.1447946 ↗
12. www.comsol.com (valid on October 26, 2011).
13. F. Schuurmans, A. Schonecker, J. Eikelboom, W. Sinke, Crystal-orientation dependence of surface recombination velocity for silicon nitride passivated silicon wafers, in: 25th IEEE Photovoltaic Specialists Conference IEEE, 1996, pp. 485–488.10.1109/PVSC.1996.564049 ↗
14. H. Mäckel, A. Cuevas, Determination of the surface recombination velocity of unpassivated silicon from spectral photoconductance measurements, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, pp. 71–74.